1 / 10

3211 Sat 10 th November 2012

3211 Sat 10 th November 2012. Summary. BPM normalisation error studies on INJ-BPM-01 : using different (rack room) cards. Swapping of H/V cables on INJ-BPM-01 few times within short time invervals . INJ-BPM-01 signals vs SOL-01 Record AR1 BPM signals to study frequency contents.

neveah
Download Presentation

3211 Sat 10 th November 2012

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 3211 Sat 10th November 2012

  2. Summary • BPM normalisation error studies on INJ-BPM-01 : using different (rack room) cards. • Swapping of H/V cables on INJ-BPM-01 few times within short time invervals. • INJ-BPM-01 signals vs SOL-01 • Record AR1 BPM signals to study frequency contents. • INJ-BPM-03 signals simultaneously with INJ-FCUP and PI laser power trace. • Key finding: The 6 MHz seen in October ‘12 data is not present now.

  3. BPM normalisation error studies on INJ-BPM-01 : using different (rack room) cards. With the ‘normal’ rack room card (08) this is an example of what the x,y, charge signals look like Note:- Droop on x and charge spikes on y

  4. BPM normalisation error studies on INJ-BPM-01 : using different (rack room) cards • Take fourier of the bunch train signals with initial transient (6.25 μs) and final droop (25 μs) removed => 70 μs section of the train whole spectrum including aliasing, no 6 MHz evident minimum frequency resolvable for 70 μs train is 1/70 μs = 15 kHz

  5. BPM normalisation error studies on INJ-BPM-01 : CARD 06

  6. BPM normalisation error studies on INJ-BPM-01 : CARD 04

  7. BPM normalisation error studies on INJ-BPM-01 : CARD 08 NB mistake here

  8. Conclusions on INJ-BPM-01 vs. BPM attentuation • The 300 kHz amplitude in the sum_voltage signal seems to depend on the BPM attenuation. Higher attenuation, lower amplitude. • Behaviour of other low frequency components not very clear.

  9. Swap Cables – X, Y, CHARGE attenuation = 15 attenuation = 18 reference • Switch cables for H pickups to V pickups; and vice versa. swap cables swap cables back

  10. Swap Cables – fourier transforms attenuation = 15 attenuation = 18 reference swap cables swap cables back

More Related