Tapper + ® Xtreme. Applications. The right choice: Windows and Door Frames Exterior Fixtures Hand Rails Electrical Boxes Hurricane Shutters Screen Enclosures. Tapper + ® Xtreme. Great for Retro-Fitting. Back out old screw. No need to patch hole. Simply enlarge hole
Great for Retro-Fitting
Back out old screw
No need to patch hole
Simply enlarge hole
with Tapper+ Bit
Drive a new
Independent Code Approvals!
Beats The Competition
*Based on Manufacturer Published literature, 1-3/4” embedment
Superior Corrosion Resistance
When salt spray tested head to head against the ITW Tapcon® with the Climaseal coating the Powers Tapper+ PermaSeal® Coating outperformed the competition with no visible red rust.
Note the fast install time and minimal effort during installation due to the coarse thread.
1. Using the included 5/16” Tapper+ SDS Bit, drill a hole into concrete.
3. Drive the anchor with an impact wrench (max 115 ft-lbs.) Recommended DEWALT DCF895C2
2. With a #3 bit tip or 5/16” hex socket depending on head style mount the anchor into the socket
4. After installation notice the on the head. The head diameter is the same size as the ¼” Tapper+.
Competitive Part # Cross Reference
*Only available in
button head style
*Bronze available by special order
For Ordering Information Download the Brochure here: http://www.powers.com/pdfs/catalogs/49159_tapperplus_hi.pdf