1 / 4

Password recovery errors 0180 / C9530

Password recovery errors 0180 / C9530. André Steensma, Service Engineer, International Sales & Solutions Division. Password Recovery. reset the ID and password for the admin account of command center Information needed Model Name Serial Number Total counter Reset file will be created

neo
Download Presentation

Password recovery errors 0180 / C9530

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Password recoveryerrors 0180 / C9530 André Steensma, Service Engineer, International Sales & Solutions Division

  2. Password Recovery • reset the ID and password for the admin account of command center • Information neededModel NameSerial NumberTotal counter • Reset file will be created • Device security level should be lowNumber of copies allowed is limited • Applicable models, most current products "Team KYOCERA" KDIS Partner Support Conference in NL 15/16 May 2013

  3. Error 0180 / eeprom missing • In case of 0180 serial number mismatchrun maintenance mode 004 • If one eeprom is corrupt or missinginsert an empty eeprom and run 004 • Currently used eepromMicrochip 24Lc32 ~ 24lc1024Available on the internet and in many countries. • Programming at KDIS if possibleneed model name, serial numberall eeprom, sub pcb, mac addressand counter readings "Team KYOCERA" KDIS Partner Support Conference in NL 15/16 May 2013

  4. Error C9530 • It can happen when too many parts are changed at the same time • Put back all original parts and if an error occurs inform kdis • In case of error 0180, perform mode 004 • If putting back all original parts and trying to recover the original problem, it can not be recovered in the field and might only be recoverable at the factory "Team KYOCERA" KDIS Partner Support Conference in NL 15/16 May 2013

More Related