1 / 40

ECE 477 Design Review Team 9  Spring 2011

ECE 477 Design Review Team 9  Spring 2011. Left-to-right: Oliver Staton, Vinayak Gokhale, Vineet Ahuja, Nick Gentry. Outline. Project overview Project-specific success criteria Block diagram Component selection rationale Packaging design Schematic and theory of operation PCB layout

nayef
Download Presentation

ECE 477 Design Review Team 9  Spring 2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECE 477 Design Review Team 9  Spring 2011 Left-to-right: Oliver Staton, Vinayak Gokhale, Vineet Ahuja, Nick Gentry

  2. Outline • Project overview • Project-specific success criteria • Block diagram • Component selection rationale • Packaging design • Schematic and theory of operation • PCB layout • Software design/development status • Project completion timeline • Questions / discussion

  3. Project Overview The proposed project is a four rotor helicopter platform that will run a stability algorithm. Furthermore, the helicopter will have object avoidance capabilities and basic waypoint navigation. Sensor data will be sent out wirelessly.

  4. Project-Specific Success Criteria • An ability to remotely monitor remaining battery life (fuel gauge). • An ability to hover in a stable position (based on autonomous stability / control algorithm). • An ability to fly in any direction (compass orientation) at a variable speed and a stable altitude (based on autonomous stability / control algorithm). • An ability to take off/land (ascend / descend) while remaining level (based on autonomous stability / control). • An ability to remotely control flight functions (e.g., ascend, descend, hover, compass orientation, forward speed).

  5. Block Diagram

  6. Component Selection RationaleIMU Sensors 3-Axis Gyroscope ITG3200 (I2C interface) Dedicated 16-Bit Onboard ATD 3-Axis Accelerometer LIS3LV02DQ (I2C interface) Dedicated 16-Bit onboard ATD 3-Axis Tilt-Compensated Magnetometer HMC6343 (I2C interface) 2 degree resolution

  7. Component Selection RationaleObject Avoidance and Translational Motion Ultrasonic Sensor Maxbotix LV EZ4 (Analog) 10mv/inch, up to ~21 feet Optical Flow Sensor (provides X-Y location) ADNS2620 (SPI) 3000fps, 400cpi resolution, accurate up to 12 ips Retrofitted with alternate lens for 3ft focal length

  8. Component Selection Rationale Brushless Motors Constraints: • Greater than 2:1 thrust to vehicle weight ratio • Current should not exceed 10A per motor @ 14.8V Selection: • MK2832/35 Brushless 14-Pole • Lithium Cell Count: 4 • Maximum load current: 10A • No load speed: 760RPM/V • Maximum Thrust (10x4.5 prop): 820g per motor

  9. Component Selection Rationale Electronic Speed Control Constraints: • Must be able to source > 10A @ 14.8V Selection: • Turnigy Basic 18A ver3.1 • Lithium Cell Count: 2-4 • Maximum load current: 22A • Continuous Current: 18A

  10. Component Selection Rationale Battery • Constraints: • Must be able to supply > 50A @ 14.8V • Runtime > 10 minutes • Selection: • Turnigy Nano-Tech • 14.8V / 4500mAh • 25C Discharge Rate

  11. Component Selection Rationale Wi-Fi Module • Constraints: • Baud rate > 400kbps to achieve proper transmission of video and control data • Selection: • Roving Networks RN-131G • 802.11 b/g • WPA/WPA2 • 4uA sleep • 40mA Rx • 210mA Tx

  12. Component Selection RationalePrimary Microcontroller • Constraints: • Purpose: Run Stability Algorithm • Peripherals • I2C x2 • SPI x1 • UART x2 • Six channels of 12-Bit ATD • Four channels of PWM • Selection: • Texas Instruments MSP430F5438 16-Bit 25MHz • 256KB Flash • 16KB Ram

  13. Component Selection Rationale Secondary Microcontroller • Constraints: • Purpose: Process video + WiFi interface • Peripherals • I2C x2 • UART x2 • Selection: • Texas Instruments MSP430F2618 16-Bit 16MHz • 116KB Flash • 8KB Ram

  14. Component Selection Rationale Airframe • Constraints: • Rigid structure • Lightweight / durable material • Selection: • Mikrokopter MK50 Frame • Extruded Aluminum beams • Carbon fiber base plate • 120 grams

  15. Packaging Design 50cm motor-to-motor (diagonal) Above: Top view of Airframe.

  16. Packaging Design Tubular Aluminum Carbon Fiber Cover Above: Airframe with cover.

  17. Packaging Design Above: Airframe with cover removed.

  18. Packaging Design Above: 3 PCB Stack positioned at center of airframe.

  19. Schematic/Theory of Operation Lithium Polymer Battery • 14.8 V • 4500 mAh • LM7805(5V) & UA78M33(3.3V) • Microcontrollers • MSP430F5438: IMU, PWM, Ultrasonics, PID controller • MSP430F2618: WIFI module, Optical Flow Sensor, Battery Monitor • WIFI Module (RN121) • 3.3V • Uart TTL logic interface • Placed on board the MSP430F2618, it will transfer control data sent from base station to MSP430F5438 via UArt

  20. Schematic/Theory of Operation • Ultrasonic Sensors • 6 Ultrasonic Sensors connected to top board • Operates at 3.3V • Measures distance from obstacle & outputs analog voltage at 6.4 mV/in sampled via ADC channels in micro.

  21. Schematic/Theory of Operation Electronic Speed Controller (Turnigy Basic 18A) • 10 A at 14.8V • Connected to headers on the bottom board. • Takes PWM input and interprets duty cycle into 3 phase power output to Brushless DC motors.

  22. Gyroscope (ITG-3200) 3.3V I2C, 400KHz fast mode Gives radians/s along X, Y and Z axes which will be fed into PID controller to stabilize vehicle. Schematic/Theory of Operation • 3 axis Accelerometer (LISL3LV02DQ) • 3.3 V • I2C device connected to MSP430F438 • Will provide real time calibration of Gyroscope. • Magnetometer (HMC6343) • 3.3V I2C slave device connected to MSP430F5438 • This compass corrects the gyroscope reading for heading read error (yaw drift).

  23. Battery Monitor 4 Voltage divider circuits which divide the battery voltage down to a level that can be monitored on the ADC channels Schematic/Theory of Operation

  24. Schematic/Theory of OperationPID Stability: Roll H3 H2 H1 G Loop #1 Loop #2 Loop #3 Left-to-right translational velocity Roll Rate Left-to-right sensor data Roll angle

  25. Schematic/Theory of OperationPID Stability: Pitch H3 H2 H1 G Loop #1 Loop #2 Loop #3 forward translational velocity Pitch rate Front-to-back sensor data Pitch angle

  26. Schematic/Theory of OperationPID Stability: Altitude H2 H1 G Loop #1 Loop #2 Altitude Total thrust Vertical Velocity

  27. Schematic/Theory of OperationPID Stability: YAW H2 H1 G Loop #1 Loop #2 Heading Ratio of thrusts Yaw rate

  28. Feedback Loop – “Firing Order” SET #1 SET #2 SET #3

  29. PCB Layout • Small board area but multiple (three) boards. • Precise placement of components. • Avoid congestion on any one board. • Keep center of gravity low. • Keep boards level.

  30. PCB Layout Above: PCB bottom level.

  31. PCB Layout Above: PCB middle level

  32. PCB Layout Above: PCB top level.

  33. Software Design/Development Status • MSP430F5438 : I2C, PWM, Uart, ADC • Tested ADC sampling of ultrasonic sensors • Uart, PWM generic libraries available • Established communication with magnetometer via I2C • Currently working on Gyroscope and Accelerometer • MSP430F2618: Uart, SPI, ADC • Tested Generic Uart Code.

  34. Software Design/Development Status • Constructed test stand • Allows roll, pitch, and yaw measurements • Characterized brushless motors • Torque and thrust curves given unit step and ramp inputs • Established values for motor Tau Example of motor characterization given unit step input

  35. Project Completion Timeline

  36. Project Completion Timeline

  37. Questions / Discussion

More Related