1 / 37

Notes 20

ECE 5317-6351 Microwave Engineering. Fall 2011. Prof. David R. Jackson Dept. of ECE. Notes 20. Power Dividers and Couplers Part 2. Directional Couplers. Four-Port Networks. Consider a reciprocal 4-port network with matched ports:.

nash
Download Presentation

Notes 20

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE 5317-6351 Microwave Engineering Fall 2011 Prof. David R. Jackson Dept. of ECE Notes 20 Power Dividers and Couplers Part 2

  2. Directional Couplers Four-Port Networks Consider a reciprocal 4-port network with matched ports: There are 6 degrees of freedom (independent S parameters). If lossless  [S] is unitary. The device is called a “directional coupler” if:

  3. Directional Couplers Directional coupler: There are now 4 degrees of freedom. • All ports are matched. • No power flows to port 4 from in the input port 1 (i.e., port 4 is “isolated”). • Ports 2 and 3 are isolated (power incident on port 2 does not get to port 3 and vice versa).

  4. Directional Couplers Directional coupler symbol: • All ports are matched. • No power flows to port 4 from in the input port 1 (i.e., port 4 is “isolated”). • Ports 2 and 3 are isolated (power incident on port 2 does not get to port 3 and vice versa).

  5. Directional Couplers From the unitary property of the matrix, we have the following results:

  6. Directional Couplers (cont.) Choose The first equation is really just a choice of reference planes on ports 2 and 3, which makes these parameters real. (usually, n = 0)

  7. Directional Couplers (cont.) Two possible choices: 1) Symmetrical coupler Example: 90o quadrature hybrid coupler 2) Anti-symmetrical coupler Example: 180o rat-race hybrid coupler

  8. Directional Couplers (cont.) Assume a signal into port 1 Return loss Ideally + dB Directivity Ideally + dB Assume ports 2-4 are matched. A “hybrid” coupler is one for which the coupling is 3 dB (equal power split at the output ports 2 and 3): Isolation Ideally + dB Coupling

  9. 90o (Quadrature) Hybrid Coupler “A quadrature coupler is one in which the input is split into two signals (usually with a goal of equal magnitudes) that are 90 degrees apart in phase. Types of quadrature couplers include branchline couplers (also known as quadrature hybrid couplers), Lange couplers and overlay couplers.” Taken from “Microwaves 101” http://www.microwaves101.com/encyclopedia/Quadrature_couplers.cfm This is very useful for obtaining circular polarization: There is a 90o phase difference between ports 2 and 3.

  10. Quadrature Hybrid Coupler (cont.) 1 2 4 3 90o hybrid • The quadrature hybrid is a lossless 4-port (the S matrix is unitary ). • All four ports are matched. • The device is reciprocal (the S matrix is symmetric.) • Port 4 is isolated from port 1 and ports 2 and 3 are isolated from each other.

  11. Quadrature Hybrid Coupler (cont.) The quadrature hybrid is usually used as a splitter: 1 2 4 3 +90o out of phase -90o out of phase 90o hybrid • The signal from port 1 splits evenly between ports 2 and 3, with a 90o phase difference. • The signal from port 4 splits evenly between ports 2 and 3, with a -90o phase difference. Can be used to produce right-handed circular polarization. Can be used to produce left-handed circular polarization.

  12. Quadrature Hybrid Coupler (cont.) (Branch-line coupler) A microstrip realization is shown here. Note: We only need to study what happens when we excite port 1, since the structure is symmetric. We use even/odd mode analysis (exciting ports 1 and 4) to figure out what happens when we excite port 1.

  13. Quadrature Hybrid Coupler (cont.) Even Analysis 

  14. Quadrature Hybrid Coupler (cont.) Odd Analysis 

  15. Quadrature Hybrid Coupler (cont.) Consider the general case: . In general: Shunt load on line Quarter-wave line

  16. Quadrature Hybrid Coupler (cont.) Hence we have

  17. Quadrature Hybrid Coupler (cont.) Continuing with the algebra, we have

  18. Quadrature Hybrid Coupler (cont.) Hence we have Convert this to S parameters (use Table 4.2 in Pozar):

  19. Quadrature Hybrid Coupler (cont.) By symmetry: Hence

  20. Quadrature Hybrid Coupler (cont.) By symmetry and reciprocity:

  21. Quadrature Hybrid Coupler (cont.) By symmetry and reciprocity:

  22. Quadrature Hybrid Coupler (cont.) By symmetry and reciprocity:

  23. Quadrature Hybrid Coupler (cont.) Summary The input power to port 1 divides evenly between ports 2 and 3, with ports 2 and 3 being 90o out of phase.

  24. 180o Hybrid Coupler (Rat-Race Ring Hybrid) Figure 7.42 of PozarPhotograph of a microstrip ring hybrid.Courtesy of M. D. Abouzahra, MIT Lincoln Laboratory “Applications of rat-race couplers are numerous, and include mixers and phase shifters. The rat-race gets its name from its circular shape, shown below.” Taken from “Microwaves 101” http://www.microwaves101.com/encyclopedia/ratrace_couplers.cfm

  25. Rat-Race Ring Hybrid (cont.) 1 2 4 3 180o hybrid • The rat race is a lossless 4-port (the S matrix is unitary). • All four ports are matched. • The device is reciprocal (the S matrix is symmetric). • Port 4 is isolated from port 1 and ports 2 and 3 are isolated from each other.

  26. Rat-Race Ring Hybrid (cont.) The rat race can be used as a splitter: 1 2 4 3  In phase 180o out of phase 180o hybrid  • The signal from the “sum port”  (port 1) splits evenly between ports 2 and 3, in phase. • The signal from the “difference port”  (port 4) splits evenly between ports 1 and 2, 180o out of phase.

  27. Rat-Race Ring Hybrid (cont.) The rat race can be used as a combiner: 1 2 4 3 Signal 1 (V1)  180o hybrid  Signal 2 (V2) • The signal from the sum port  (port 1) is the sum of the input signals 1 and 2. • The signal from the difference port  (port 4) is the difference of the input signals 1 and 2.

  28. Rat-Race Ring Hybrid (cont.) A microstrip realization is shown here.

  29. 180o Hybrid Coupler (Magic T) A waveguide realization of a 180o hybrid coupler is shown here, called a “Magic T.” “Magic T” Please see p. 361 of Pozar. IEEE Microwave Theory and Techniques Society Note the logo!

  30. Rat-Race Ring Hybrid (cont.) Schematic Layout

  31. Rat-Race Ring Hybrid (cont.) Even Analysis 

  32. Rat-Race Ring Hybrid (cont.) Odd Analysis 

  33. Rat-Race Ring Hybrid (cont.) Proceeding as for the 90o coupler, we have:

  34. Rat-Race Ring Hybrid (cont.) Converting from the ABCD matrix to the S matrix, we have Table 4.2 in Pozar

  35. Rat-Race Ring Hybrid (cont.) For the S parameters coming from port 1 excitation, we then have:

  36. Rat-Race Ring Hybrid (cont.) Similarly, exciting port 2, and using symmetry and reciprocity, we have the following results:

  37. Rat-Race Ring Hybrid (cont.) Summary

More Related