1 / 33

CMSC 341

CMSC 341. B- Trees D. Frey with apologies to Tom Anastasio. Large Tree. Tailored toward applications where tree doesn’t fit in memory operations much faster than disk accesses want to limit levels of tree (because each new level requires a disk access) keep root and top level in memory.

mura
Download Presentation

CMSC 341

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CMSC 341 B- Trees D. Frey with apologies to Tom Anastasio

  2. Large Tree • Tailored toward applications where tree doesn’t fit in memory • operations much faster than disk accesses • want to limit levels of tree (because each new level requires a disk access) • keep root and top level in memory

  3. Textbook Errors • Please check the textbook web page for typos and other errors. • In particular, the section on B-Trees (4.7) has a couple of typos (pages 166 and 167) • Page 166 – numbered item 5 right margin should be “…and L data items…”, not “…L children...” • Page 167 – ½ way down, left margin, change “and the first level” to “and the next level”

  4. An alternative to BSTs • Up until now we assumed that each node in a BST stored the data. • What about having the data stored only in the leaves? The internal nodes just guide our search to the leaf which contains the data we want. • We’ll restrict this discussion of such trees to those in which all leaves are at the same level.

  5. 10 16 7 4 9 14 19 1 4 7 9 10 14 16 19 Figure 1 - A BST with data stored in the leaves

  6. Observations • Store data only at leaves; all leaves at same level • interior and exterior nodes have different structure • interior nodes store one key and two subtree pointers • all search paths have same length: lg n • can store multiple data elements in a leaf

  7. M-Way Trees • A generalization of the previous BST model • each interior node has M subtrees pointers and M-1 keys • the previous BST would be called a “2-way tree” or “M-way tree of order 2” • as M increases, height decreases: lgM n • perfect M-way tree of height h has Mh leaves

  8. An M-way tree of order 3 Figure 2 (next page) shows the same data as figure 1, stored in an M-way tree of order 3. In this example M = 3 and h = 2, so the tree can support 9 leaves, although it contains only 8. One way to look at the reduced path length with increasing M is that the number of nodes to be visited in searching for a leaf is smaller for large M. We’ll see that when data is stored on the disk, each node visited requires a disk access, so reducing the nodes visited is essential.

  9. 9 16 4 7 10 14 19 1 4 7 9 10 14 16 19 Figure 2 -- An M-Way tree of order 3

  10. Searching in an M-way tree • Different from standard BST search • search always terminates at a leaf node • might need to scan more than one element at a leaf • might need to scan more than one key at an interior node • Trade-offs • tree height decreases as M increases • computation at each node during search increases as M increases

  11. Searching an M-way tree Search (MWayNode *v, DataType element, bool& foundIt)if v == NULL return failureif v is a leaf search the list of values looking for element if found, return success otherwise return failure else if v is an interior node search the keys to find which subtree element is in recursively search the subtree • For “real” code, see Dr. Anastasio’s postscript notes

  12. 22 36 48 6 12 18 26 32 42 54 2 4 6 8 10 12 14 16 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 Figure 3 – searching in an M-way tree of order 4

  13. Is it worth it? • Is it worthwhile to reduce the height of the search tree by letting M increase? • Although the number of nodes visited decreases, the amount of computation at each node increases. • Where’s the payoff?

  14. An example • Consider storing 107 items in a balanced BST and in an M-way tree of order 10. • The height of the BST will be lg(107) ~ 24. • The height of the M-Way tree will be log(107 ) = 7. • However, in the BST, just one comparison will be done at each interior node, but in the M-Way tree, 9 will be done (worst case)

  15. How can this be worth the price? • Only if it somehow takes longer to descend the tree than it does to do the extra computation • This is exactly the situation when the nodes are stored externally (e.g. on disk) • Compared to disk access time, the time for extra computation is insignificant • We can reduce the number of accesses by sizing the M-way tree to match the disk block and record size. See Weiss text, section 4.7, page 165 for an example.

  16. A generic M-Way Tree Node template <class Ktype, class Dtype> class MWayNode { public:// constructors, destructor, accessors, mutators private:bool isLeaf; // true if node is a leafint m; // the “order” of the nodeint nKeys; // nr of actual keys usedKtype *keys; // array of keys (size = m - 1)MWayNode *subtrees; // array of pts (size = m)int nElems; // nr possible elements in leafList<Dtype> data; // data storage if leaf };

  17. B-Tree Definition A B-Tree of order M is an M-Way tree with the following constraints • The root is either a leaf or has between 2 and M subtrees • All interior node (except maybe the root) have between  M / 2 and M subtrees (I.e. each interior node is at least “half full” • All leaves are at the same level. A leaf must store between L / 2 and L data elements, where L is a fixed constant >= 1 (I.e. each leaf is at least half full,except when the tree has fewer than L/2 elements)

  18. A B-Tree example • The following figure (also figure 3) shows a B-Tree with M = 4 and L = 3 • The root node can have between 2 and M=4 subtrees • Each other interior node can have between  M / 2 =  4 / 2 = 2 and M = 4 subtrees and up to M – 1 = 3 keys. • Each exterior node (leaf) can hold between  L / 2 =  3 / 2 = 2 and L = 3 data elements

  19. 22 36 48 6 12 18 26 32 42 54 2 4 6 8 10 12 14 16 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 Figure 4 – A B-Tree with M = 4 and L = 3

  20. Designing a B-Tree • Recall that M-way trees (and therefore B-trees) are often used when there is too much data to fit in memory. Therefore each node and leaf access costs one disk access. • When designing a B-Tree (choosing the values of M and L), we need to consider the size of the data stored in the leaves, the size of the key and pointers stored in the interior nodes and the size of a disk block

  21. Student Record Example Suppose our B-Tree stores student records which contain name, address, etc. and other data totaling 1024 bytes. Further assume that the key to each student record (ssn??) is 8 bytes long. Assume also that a pointer (really a disk block number, not a memory address) requires 4 bytes And finally, assume that our disk block is 4096 bytes

  22. Calculating L L is the number of data records that can be stored in each leaf. Since we want to do just one disk access per leaf, this is the same as the number of data records per disk block. Since a disk block is 4096 and a data record is 1024, we choose L = 4096 / 1024 = 4 data records per leaf.

  23. Calculating M Each interior node contains M pointers and M-1 keys. To maximize M (and therefore keep the tree flat and wide) and yet do just one disk access, we have the following relationship 4M + 8 ( M – 1) <= 4096 12M <= 4014 M <= 342 So let’s choose a nice round number like M = 300

  24. Performance of our B-Tree With M = 300 the height of our tree for N students will be  log300(N) . For example, with N = 100,000 (about 10 times the size of UMBC student population) the height of the tree with M = 300 would be no more than 3, because  log300(100000) = 2.5 So any student record can be found in 3 disk accesses.

  25. Insertion of X in a B-Tree • Search to find which leaf X belongs in. • If leaf has room (fewer than L elements), add it (and write back to disk). • If leaf full, split into two leaves, each with half of elements. (write new leaves to disk) • Update the keys in the parent • if parent was already full, split in same manner • splits may propagate all the way to the root, in which case, the root is split (this is how the tree grows in height)

  26. Insert 33 into this B-Tree 22 36 48 6 12 18 26 32 42 54 2 4 6 8 10 12 14 16 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 Figure 5 – before inserting 33

  27. Inserting 33 • Traversing the tree from the root, we find that 33 is less than 36 and is greater than 33, leading us to the 2nd subtree. Since 32 is greater than 32 we are led to the 3rd leaf (the one containing 32 and 34). • Since there is room for an additional data item in the leaf it is inserted (in sorted order which means reorganizing the leaf)

  28. After inserting 33 22 36 48 6 12 18 26 32 42 54 2 4 6 8 10 12 14 16 18 19 20 22 24 26 28 30 32 33 34 36 38 40 42 44 46 48 50 52 54 56 Figure 6 – after inserting 33

  29. Now insert 35 • This item also belongs in the 3rd leaf of the 2nd subtree. However, that leaf is full. • Split the leaf in two and update the parent to get the tree in figure 7.

  30. After inserting 35 22 36 48 6 12 18 26 32 34 42 54 2 4 6 8 10 12 14 16 18 19 20 22 24 26 28 30 32 33 34 35 36 38 40 42 44 46 48 50 52 54 56 Figure 7 – after inserting 35

  31. Inserting 21 • This item belongs in the 4th leaf of the 1st subtree (the leaf containing 18, 19, 20). • Since the leaf is full, we split it and update the keys in the parent. • However, the parent is also full, so it must be split and its parent (the root) updated. • But this would give the root 5 subtrees which is not allowed, so the root must also be split. • This is the only way the tree grows in height

  32. After inserting 21 22 36 48 18 6 12 20 26 32 34 42 54 2 4 6 8 10 12 14 16 18 19 20 21 22 24 26 28 30 32 33 34 35 36 38 40 42 44 46 48 50 52 54 56 Figure 8 – after inserting 21

  33. B-tree Deletion • Find leaf containing element to be deleted. • If that leaf is still full enough (still has  L / 2 elements after remove) write it back to disk without that element. Then change the key in the ancestor if necessary. • If leaf is now too empty (has less than  L / 2 elements), borrow an element from a neighbor. • If neighbor would be too empty, combine two leaves into one. • This combining requires updating the parent which may now have too few subtrees. • If necessary, continue the combining up the tree

More Related