1 / 3

Advantages and Disadvantages of Fabricating The Pipes on Field

The pipe fabrication Singapore is one of the major steps in any of the manufacturing industries. The pipes are installed only after the fabrication process is completed.

munsiong01
Download Presentation

Advantages and Disadvantages of Fabricating The Pipes on Field

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Advantages and Disadvantages of Fabricating The Pipes on Field The pipe fabrication Singapore is one of the major steps in any of the manufacturing industries. The pipes are installed only after the fabrication process is completed. The installation system can be completed following two of the primary methods. These are: ● field fabrication and installation of pipes ● Shop fabrication and installation of pipes In the following section of this article, we will be considering the advantages and disadvantages of using the field fabrication services for creating the required pipes.

  2. Advantages ● There is less headache about transportation. You only have to bring the raw material to the site location to start the work. These are much easier to store and handle than the multiple configurations. ● You do not need to waste your time to carefully tie-down, choke and crib the pipe spool pieces for transporting them to the job site. ● The risks of damaging the spool are way less than before. ● You get a better opportunity for facing unexpected obstacles, like structural steel, duct, cable tray, etc. ● The fabricate as you install reduces the risk of reworking during the prefabrication process. It also reduces the cost of field verification of the work significantly.

  3. Disadvantages ● The changing weather conditions are one of the primary deterrents of this kind of fabrication. If the field facility is not enclosed, then you have to arrange for protection from the elements. ● In the uncontrolled environment of the field, you will need to arrange for preheating if the ambient temperature is less than 0 degrees. ● In the case of new facilities, the field fabrication process of the but well piping system is not as effective. The cost of the project also enhances and becomes ineffective. The best way to choose the fabrication process is by talking to your clients. Explain all the advantages and benefits of each of the processes and let them have the final say. It will save you a lot of trouble in the long run.

More Related