1 / 7

CAMERA QUICK START

CAMERA QUICK START. Get started, shoot and upload. Camera quick start. INTRODUCTION The Sanyo Dual Camera VPC-HD2000EX is a Full HD digital camcorder. To read a complete QuickGuide manual check out: http ://en.ca.sanyo.com/dynamic/product/Downloads/QuickGuide_GB-16187795. pdf.

morrie
Download Presentation

CAMERA QUICK START

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CAMERA QUICK START Get started, shoot and upload

  2. Camera quick start • INTRODUCTION • The Sanyo Dual Camera VPC-HD2000EX is a Full HD digital camcorder. • To read a complete QuickGuide manual check out:http://en.ca.sanyo.com/dynamic/product/Downloads/QuickGuide_GB-16187795.pdf

  3. Camera quick start • 1. GET STATED • Turn on/off the camera by lifting/closing the monitor unit. Alternatively use the ON/OFF-switch – press for one second – underneath the monitor unit. • Remove the lens cover. • Set the REC/PLAY switch - To shoot: REC - To playback: PLAY

  4. Camera quick start • 2. SHOOT • Set the camera to recording mode (REC). • Press the red camera button and recording begins(same procedure on the remote control). • Press the red camera button again to stop recording. • Zoom in and out by using the T/W switch on the left side (sameprocedure on the remote control).

  5. Camera quick start • 2.1 View files • Set the REC/PLAY switch on PLAY • Use the SET button to scroll through the recorded files by moving it left/right and up/down. • Press the SET button to select and view a specific file. • Pause, rewindand stop the selected video by using the SET button as instructed on the monitor.

  6. Camera quick start • 3. UPLOAD • Place the camera as shown in the docking station terminal. • Connect the docking station to apower outlet (using the AC adapter) and to a computer (using the USB cable). • Turn on the camera with the ON/OFF button and follow the instructions on the monitor. • Choose “computer” from the menu by pressing the SET button.

  7. Camera quick start • 3. UPLOAD - continued • Choose “card reader” from the menu. • A window will open, but simply close that and all other pop-ups. • Access the camera as an external hard disk in “This computer” on the PC. • The camera files are placed in the “DCIN”-folder. • Select and copy the desired files to another folder or the desktop on the computer. • You can delete files on the camera through the computer. • Now you are ready to edit video.

More Related