1 / 80

CPSC 121: Models of Computation 2011 Winter Term 1

CPSC 121: Models of Computation 2011 Winter Term 1. Building & Designing Sequential Circuits Steve Wolfman, based on notes by Patrice Belleville and others. Outline. Prereqs, Learning Goals, and Quiz Notes Problems and Discussion A Pushbutton Light Switch

moana
Download Presentation

CPSC 121: Models of Computation 2011 Winter Term 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CPSC 121: Models of Computation2011 Winter Term 1 Building & Designing Sequential Circuits Steve Wolfman, based on notes by Patrice Belleville and others

  2. Outline • Prereqs, Learning Goals, and Quiz Notes • Problems and Discussion • A Pushbutton Light Switch • Memory and Events: D Latches & Flip-Flops • General Implementation of DFAs (with a more complex DFA as an example) • How Powerful are DFAs? • Next Lecture Notes

  3. Learning Goals: Pre-Class We are mostly departing from the readings to talk about a new kind of circuit on our way to a full computer: sequential circuits. The pre-class goals are to be able to: • Trace the operation of a deterministic finite-state automaton (represented as a diagram) on an input, including indicating whether the DFA accepts or rejects the input. • Deduce the language accepted by a simple DFA after working through multiple example inputs.

  4. Learning Goals: In-Class By the end of this unit, you should be able to: • Translate a DFA to a corresponding sequential circuit, but with a “hole” in it for the circuitry describing the DFA’s transitions. • Describe the contents of that “hole” as a combinational circuitry problem (and therefore solve it, just like you do other combinational circuitry problems!). • Explain how and why each part of the resulting circuit works. Discuss point of learning goals.

  5. Where We Are inThe Big Stories Theory Hardware How do we build devices to compute? Now: Learning to build a new kind of circuit with memory that will be the key new feature we need to build full- blown computers! (Something you’ve seen in lab from a new angle.) How do we model computational systems? Now: With our powerful modelling language (pred logic), we can prove things like universality of NOR gates for combinational circuits. Our new model (DFAs) are sort of full computers.

  6. Outline • Prereqs, Learning Goals, and Quiz Notes • Problems and Discussion • A Pushbutton Light Switch • Memory and Events: D Latches & Flip-Flops • General Implementation of DFAs (with a more complex DFA as an example) • How Powerful are DFAs? • Next Lecture Notes

  7. Problem: Push-Button Light Switch Problem: Design a circuit to control a light so that the light changes state any time its “push-button” switch is pressed. (Like the light switches in Dempster: Press and release, and the light changes state. Press and release again, and it changes again.) ?

  8. A Light Switch “DFA” ? pressed light off light on pressed This Deterministic Finite Automaton (DFA) isn’t really about accepting/rejecting; its current state is the state of the light.

  9. Problem: Light Switch Problem: Design a circuit to control a light so that the light changes state any time its “push-button” switch is pressed. Identifying inputs/outputs: consider these possible inputs and outputs: Input1: the button was pressed Input2: the button is down Output1: the light is on Output2: the light changed states • Which are most useful for this problem? • Input1 and Output1 • Input1 and Output2 • Input2 and Output1 • Input2 and Output2 • None of these ?

  10. COMPARE TO: Lecture 2’s Light Switch Problem: Design a circuit to control a light so that the light changes state any time its switch is flipped. Identifying inputs/outputs: consider these possible inputs and outputs: Input1: the switch flipped Input2: the switch is on Output1: the light is on Output2: the light changed states • Which are most useful for this problem? • Input1 and Output1 • Input1 and Output2 • Input2 and Output1 • Input2 and Output2 • None of these ?

  11. Outline • Prereqs, Learning Goals, and !Quiz Notes • Problems and Discussion • A Pushbutton Light Switch • Memory and Events: D Latches & Flip-Flops • General Implementation of DFAs (with a more complex DFA as an example) • How Powerful are DFAs? • Next Lecture Notes

  12. Departures from Combinational Circuits MEMORY:We need to “remember” the light’s state. EVENTS:We need to act on a button push rather than in response to an input value.

  13. Problem: How Do We Remember? We want a circuit that: • Sometimes… remembers its current state. • Other times… loads a new state to remember. Sounds like a choice. What circuit element do we have for modelling choices?

  14. Worked Problem: “Muxy Memory” How do we use a mux to store a bit of memory? We choose to remember on a control value of 0 and to load a new state on a 1. ??? 0 output new data 1 control

  15. Worked Problem: Muxy Memory How do we use a mux to store a bit of memory? We choose to remember on a control value of 0 and to load a new state on a 1. old output (Q’) 0 output (Q) new data (D) 1 control (G) This violates our basic combinational constraint: no cycles.

  16. Truth Table for “Muxy Memory” Fill in the MM’s truth table: a. b. c. d. e. None of these

  17. Worked Problem: Truth Table for “Muxy Memory” Worked Problem: Write a truth table for the MM: Like a “normal” mux table, but what happens when Q'  Q?

  18. Worked Problem: Truth Table for “Muxy Memory” Worked Problem: Write a truth table for the MM: Q' “takes on” Q’s value at the “next step”.

  19. “D Latch” Symbol + Semantics We call a “muxy memory” a “D latch”. When G is low, the latch maintains its memory. When G is high, the latch loads a new value from D. old output (Q’) 0 output (Q) new data (D) 1 control (G)

  20. D Latch Symbol + Semantics When G is low, the latch maintains its memory. When G is high, the latch loads a new value from D. old output (Q’) 0 output (Q) new data (D) 1 control (G)

  21. D Latch Symbol + Semantics When G is low, the latch maintains its memory. When G is high, the latch loads a new value from D. D new data (D) Q output (Q) control (G) G

  22. Hold On!! Why does the D Latch have two inputs and one output when the mux inside has THREE inputs and one output? • The D Latch is broken as is; it should have three inputs. • A circuit can always ignore one of its inputs. • One of the inputs is always true. • One of the inputs is always false. • None of these (but the D Latch is not broken as is).

  23. Using the D Latch for Circuits with Memory Problem: What goes in the cloud? What do we send into G? CombinationalCircuit to calculatenext state D ?? Q input G We assume we just want Q as the output.

  24. Using the D Latch for Our Light Switch Problem: What do we send into G? current light state D ?? Q no (0 bit) input output G • T if the button is down, F if it’s up. • T if the button is up, F if it’s down. • Neither of these.

  25. A Timing Problem:We Need EVENTS! Problem: What do we send into G? current light state “pulse” when button is pressed D Q output G button pressed As long as the button is down, D flows to Q flows through the NOT gate and back to D...which is bad!

  26. A Timing Problem, Metaphor(from MIT 6.004, Fall 2002) What’s wrong with this tollbooth? P.S. Call this a “bar”, not a “gate”, or we’ll tie ourselves in (k)nots.

  27. A Timing Solution, Metaphor(from MIT 6.004, Fall 2002) Is this one OK?

  28. A Timing Problem Problem: What do we send into G? current light state “pulse” when button is pressed D Q output G button pressed As long as the button is down, D flows to Q flows through the NOT gate and back to D...which is bad!

  29. A Timing Solution (Almost) D D Q Q Never raise both “bars” at the same time. output G G button pressed

  30. A Timing Solution D D Q Q ?? output G G The two latches are never enabled at the same time (except for the moment needed for the NOT gate on the left to compute, which is so short that no “cars” get through).

  31. A Timing Solution D D button press signal Q Q output G G button pressed

  32. Button/Clock is LO (unpressed) 1 1 0 1 D D Q Q output LO 0 G G • Why isn’t the right latch’s Q output 1? • An error: it should be. • The G input is 0. • Not enough time for the D input to propagate. • I don’t know.

  33. Button goes HI (is pressed) 1 1 0 1 D D Q Q output HI 1 G G

  34. Propagating signal.. left NOT, right latch 1 1 1 0 D D Q Q output HI 1 G G

  35. Propagating signal.. right NOT (steady state) 0 1 1 0 D D Q Q output HI 1 G G

  36. Button goes LO (released) 0 1 1 0 D D Q Q output LO 0 G G

  37. Propagating signal..left NOT 0 1 1 1 D D Q Q output LO 0 G G

  38. Propagating signal..left latch (steady state) 0 0 1 1 D D Q Q output LO 0 G G And, we’re done with one cycle.How does this compare to our initial state?

  39. Master/Slave D Flip-Flop Symbol + Semantics When CLK goes from low to high, the flip-flop loads a new value from D. Otherwise, it maintains its current value. new data (D) D D output (Q) Q Q control or “clock” signal (CLK) G G

  40. Master/Slave D Flip-Flop Symbol + Semantics When CLK goes from low to high, the flip-flop loads a new value from D. Otherwise, it maintains its current value. new data (D) D D output (Q) Q Q control or “clock” signal (CLK) G G

  41. Master/Slave D Flip-Flop Symbol + Semantics When CLK goes from low to high, the flip-flop loads a new value from D. Otherwise, it maintains its current value. new data (D) D D output (Q) Q Q control or “clock” signal (CLK) G G

  42. Master/Slave D Flip-Flop Symbol + Semantics When CLK goes from low to high, the flip-flop loads a new value from D. Otherwise, it maintains its current value. new data D output Q clock signal The clock and data inputs are SWAPPEDcompared to Logisim’s symbol; sorry!

  43. Outline • Prereqs, Learning Goals, and !Quiz Notes • Problems and Discussion • A Pushbutton Light Switch • Memory and Events: D Latches & Flip-Flops • General Implementation of DFAs (with a more complex DFA as an example) • How Powerful are DFAs? • Next Lecture Notes

  44. Branch Prediction Machine An “if” in hardware is called a “branch”. Computers “pre-execute” instructions... but to pre-execute a “branch”, they must guess whether to execute the then or else part. Here’s one reasonable guess: whatever the last branch did, the next one will, too. Why? In recursion, how often do we hit the base case vs. the recursive case?

  45. Implementing the Branch Predictor (First Pass) Here’s the corresponding DFA. (Instead of accept/reject, we care about the current state.) nottaken taken taken no yes nottaken Experiments show it generally works well to add “inertia”so that it takes two “wrong guesses” to change the prediction…

  46. Implementing the Branch Predictor (Final Version) Here’s a version that takes two wrong guesses in a row to admit it’s wrong: Can we build a branch prediction circuit? taken taken taken no? YES! taken nottaken nottaken yes? nottaken NO! not taken

  47. Abstract Template for a DFA Circuit Each time the clock “ticks” move from one state to the next. store current state compute next state clock input

  48. Template for a DFA Circuit Each time the clock “ticks” move from one state to the next. D Combinationalcircuit to calculatenext state/output Q CLK input Each of these lines (except the clock) may carry multiple bits; the D flip-flop may be several flip-flops to store several bits.

  49. How to Implement a DFA: Slightly Harder • Number the states and figure out b: the number of bits needed to store the state number. • Lay out b D flip-flops. Together, their memory is the state as a binary number. • Build a combinational circuit that determines the next state given the input and the current state. • Use the next state as the new state of the flip-flops.

  50. How to Implement a DFA: Slightly Easier MUX Solution • Number the states and figure out b: the number of bits needed to store the state number. • Lay out b D flip-flops. Together, their memory is the state as a binary number. • For each state, build a combinational circuit that determines the next state given the input. • Send the next states into a MUX with the current state as the control signal: only the appropriate next state gets used! • Use the MUX’s output as the new state of the flip-flops. With a separate circuit for each state, they’re often very simple!

More Related