WLTP DTP Lab Process-EV sub group (Pre-Validation2) NTSEL Japan 16 th January

1. WLTP DTP Lab Process-EV sub group (Pre-Validation2) NTSEL Japan 16th January

2. Vehicle spec. Vehicle weight [kg] 1,100 Permanent magnet synchronous motor Type Max. output [kW/min-1] 47 / 3,000 ～ 6,000 Motor Max. torque [Nm/min-1] 180 / 0 ～ 2,000 Max. speed [min-1] 8,500 Type Lithium-ion cells 330 Drive battery Rated voltage [V] Rated capacity [kWh] 16 2009 years model Control system Inverter control Driving method Rear-wheel drive Non-blended regenerative brakesystem Vehicle condition (12/2011) Odometer : 5269 km

3. System configuration

4. Chassis dynamometer Operation room Vehicle test room <MEIDACS – DY6200P> <Dynamo meter （Fr or Rr or 4WD）> Alternating current system 　　　・Absorption power : 220kW 　　　・Motoring power : 200kW Electrical inertia method 　　　・2WD total : 570 – 2750 kg 　　　・4WD total : 800 – 3500 kg

5. Measurement machine Prove CAN monitor Front PC Data logger telecommunication equipment Rear ・Vehicle speed ・Battery voltage ・Motor current ・Accessory current ・Air-conditioner / Heater current ・Outdoor / Room temperature Connector

6. Measurement item 150 Driving mode 100 WLTP ・WLTP (WLTC v3 HS1127) ・JC08 Velocity [km/h] 50 0 150 Measured items 100 　・Range 　・ Energy consumption rate 　・ Acceleration / Break pedal opening rate JC08 Velocity [km/h] 50 0 0 600 1200 1800 Time [sec] Test cycle ・Full Charging time 5.5 hours @ 200V 12.4hours @100V ・Driving time 3.0 hour @ WLTP 6.5 hour @ JC08 Fully charged Fully charged Battery SOC revel [%] Plug off Plug off Charging Driving Charging Driving Day1 Day2

7. Test result (WLTP vs. JC08) Measurement point of energy consumption Battery Motor

8. Test result (energy consumption of L,M,H,ex-H in WLTP) Measurement point of energy consumption Battery Motor “Assumed range” is a range that was calculated on the assumption that the test vehicle was frequently driven in each part of the WLTP. Definition ⇒ X = (13/Y) × A 13kWh: Fully charged energy in the battery

9. Test result (AC200V vs. AC100V in a charge) +14% +120% 9

10. Test result (AC200V vs. AC100V in a charge) +14% +120% Which Voltage should be provided on gtr? 10

11. Test result (Pedal opening rate　＜WLTP＞) 200 150 100 Vehicle velocity [km/h] Motor torque [Nm] 50 0 -50 0 200 400 600 800 1000 1200 1400 1600 1800 100 Acceleration pedal The acceleration pedal was fully pressed to trace the WLTP. Brake pedal 80 60 Pedal opening rate [%] 40 20 0 0 200 400 600 800 1000 1200 1400 1600 1800 Time [sec]

12. Frequency distribution of Motor torque 　＜WLTP＞ 200 Motor max torque 150 100 Motor Torque [Nm] 50 Frequency Distribution 0 -50 0 2000 4000 6000 8000 20 Output power torque 16 Regeneration torque 12 Frequency Distribution of Motor Torque [%] 8 4 0 0 2000 4000 6000 8000 Motor Revolution [rpm]

13. Frequency distribution of Motor torque 　＜JC08＞ 200 Motor max torque 150 100 Motor Torque [Nm] 50 Frequency Distribution 0 -50 0 2000 4000 6000 8000 20 Output power torque 16 Regeneration torque 12 Frequency Distribution of Motor Torque [%] 8 4 0 0 2000 4000 6000 8000 Motor Revolution [rpm]