1 / 17

Programming

Programming. 27x Optical 10x Digital Zoom Day/Night Camera. Prosecutor Day / Night Windshield Mount Camera. 2 / 17. 1. OSD(On Screen Display ) FORMAT. 1) OSD DISPLAY POSITION. 3. 5. 1. 2. 4. 6. 10. 8. 7. 9. <Fig1. OSD DISPLAY POSITION>. 2) DESCRIPTION. FUNCTION.

miya
Download Presentation

Programming

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Programming 27x Optical 10x Digital Zoom Day/Night Camera Prosecutor Day / Night Windshield Mount Camera

  2. 2 / 17 1. OSD(On Screen Display ) FORMAT 1) OSD DISPLAY POSITION 3 5 1 2 4 6 10 8 7 9 <Fig1. OSD DISPLAY POSITION> 2) DESCRIPTION FUNCTION OSD Format DESCRIPTION REMARKS Non display Auto Mode 1 Focus Mode ☞ Manual / Push Auto Mode Non display Back Light OFF 2 Back Light BLC ON / Auto BLC Mode “BL” display Normal Shutter ( NTSC:1 / 60 PAL:1 / 50 ) Non display Flickerless Mode “Ff” display 3 Shutter Speed 1 / 125 . . 1 / 1 0 0 0 0 28 variable steps.

  3. 3 / 17 FUNCTION OSD Format DESCRIPTION REMARKS Non Display White Balance AUTO Special Auto White Balance ; Adjustment Mode according to change of external illuminant . RED ADJUST and BLUE ADJUST ( 0 ∼ 255 ) are available. After changing R/B value , The maintenance mode is “ AUTO”. SWB WB Preset for INDOOR 4 WBC MODE WB Preset for OUTDOOR Manual WB Adjustment ; In manual mode the HUE control is available ( 0 ~ 99 ) . M W Push Auto White Balance ; Turn this mode ON , the white trace automatically.turn this mode OFF, Preserve the white of final auto tracing action ( Manual ). PWB Indicate the camera stand-by during the camera’s power turning ON . 10 STAND-BY MODE STAND-BY DX 176 Digital Zoom mode 8 ZOOM DISPLAY X 22 Optical l Zoom mode MOTION DETECTED 6 Motion Detect Motion DET ON mode According to write the identification number to each camera , Multi-point control is available (PC Control ) ( 000 ∼ 255 ) . 7 CAMERA ID

  4. 4 / 17 2. MENU DESCRIPTIONS 1) MAIN MENU MENU CAM ID OFF FOCUS SET AWB SET AE SET SPECIAL SET MOTION DET F OSD DISP E SENSITIVE WDR EXIT <Fig2. MAIN MENU FORMAT> 2) Set Up the Menu a) In order to display the MENU on the screen , Set the Menu commend or use Menu mode in Demo. program . b) To select each item , Zoom TELE and WIDE commend or key panel is used for UP and DOWN . To change the data or set to ENTER , Focus FAR and NEAR commend or key panel is used .

  5. 5 / 17 3) SUB MENU DESCRIPTIONS (1) CAM ID MENU1 CAM ID 1 . . . . . MENU1 CAM ID OFF . . . . . CAM ID ; To connect a large number of camera , It can be assigned to identification number to each camera for camera control easily ( 000 ~ 255 : total numbers of ID are 256 ) . * It only can be set this function using ID commend. To transfer ID Code of camera , In first byte at PC control . Set the ID number of camera , And then the ID number display continuously . (2) FOCUS SET 2.1 Focus Mode Set : This function is for focus mode setting FOCUS SET FOCUS MODE Push Auto . . . . . FOCUS SET FOCUS MODE Manual . . . . . FOCUS SET FOCUS MODE Auto . . . . . MENU . FOCUS SET . . . A) Set up “FOCUS SET” in main menu using Protocol command or Demo. Soft ware. Select the “FOCUS MODE” in submenu. Using Tele/wide Command, and then set the mode “ auto, push auto, manual. 2.2 Focus Distance Set : This function is for selection of minimum shooting distance. FOCUS SET . FOCUS DIST 10cm . . . . FOCUS SET . FOCUS DIST 5M . . . . FOCUS SET . FOCUS DIST 50cm . . . . A) Select the “FOCUS DIST ” in submenu. Using Tele/wide Command, B) Set the focus distance mode from 1cm to 5M.

  6. 6 / 17 2.3 ZOOM START Set : This function is for selection of zoom start position. FOCUS SET . ZOOM START X1 . . . . FOCUS SET . ZOOM START X16 . . . . FOCUS SET . ZOOM START X21 . . . . A) Select the “ZOOM START ” in submenu. Using Tele/wide Command, B) Set the Zoom start mode from x1 to x21. 2.4 ZOOM END Set : This function is for selection of zoom end position. FOCUS SET . ZOOM END X22 . . . . FOCUS SET . ZOOM END X18 . . . . FOCUS SET . ZOOM END X176 . . . . A) Select the “ZOOM END ” in submenu. Using Tele/wide Command, B) Set the Zoom end mode from x176 to x18. 2.5 ZOOM SPEED Set : This function is for selection of zoom speed. FOCUS SET . ZOOM SPEED MIDDLE . . . . FOCUS SET . ZOOM SPEED QUICK . . . FOCUS SET . ZOOM SPEED SLOW . . . . A) Select the “ZOOM SPEED ” in submenu. Using Tele/wide Command, B) Set the Zoom speed, slow , middle , quick. 2.6 ZOOM TRACKING MODE Set : This function is for selection of zoom tracking mode. FOCUS SET . ZTRK MODE OFF . . . . FOCUS SET . ZTRK MODE ON . . . . A) Select the “ZTRK” in submenu. Using Tele/wide Command, B) Set the Zoom tracking mode to ON or OFF. * Zoom tracking means focused zooming state.

  7. 7 / 17 2.7 INITIAL SET : If initial mode set to ON, All AWB function is changed to the factory setting. FOCUS SET . INITIAL SET OFF . . . . FOCUS SET . INITIAL SET ON . . . . A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 2.8 RETURN TO MAIN MENU : This function is exit to main menu. FOCUS SET . RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command (3) AWB SET 3.1 WB Mode Set : This function is for changing the WB mode. AWB SET WB MODE Push Auto . . . . . AWB SET WB MODE Manual . . . . . AWB SET WB MODE Auto . . . . . MENU . AWB SET . . . A) Set up “AWB SET” in main menu using Protocol command or Demo. Soft ware. B) Select the “WB MODE” in submenu. Using Tele/wide Command, C) Set the mode auto, push auto , manual outdoor, indoor, special or auto using Near/Far Command. *WBC MODE ; Use for changing White Balance Mode . 1) AUTO ; WB Range 2800 。K ∼ 8000 。K . 2) PUSH AUTO ; Set the AWB mode to Push Auto, then WB Mode is auto. ⓑ SWB(Special WB) ; Under the special WB condition( Differ from curve of the control color temperature ) , Adjust Red and Blue to perform a desired Auto White Balance .

  8. 8 / 17 3.2 RED ADJUST Set : This function is available for Special WB mode. This mode is the adjustment of user option for special color. AWB SET . RED ADJUST -30 . . . AWB SET . RED ADJUST +30 . . . AWB SET . RED ADJUST 0 . . . A) Select the “RED ADJUST” in submenu. Using Tele/wide Command, B) Adjust the level from -30 to 30. The initial level is zero. 3.2 BLUE ADJUST Set : This function is available for Special WB mode. This mode is the adjustment of user option for special color. AWB SET . BLUE ADJUST -30 . . . AWB SET . BLUE ADJUST +30 . . . AWB SET . BLUE ADJUST 0 . . . A) Select the “BLUE ADJUST” in submenu. Using Tele/wide Command, B) Adjust the level from -30 to 30. The initial level is zero. 3.3 INITIAL SET : If initial mode set to ON, All AWB function is changed to the factory setting AWB SET . INITIAL SET OFF . . . . AWB SET . INITIAL SET ON . . . . A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 3.4 RETURN TO MAIN MENU : This function is exit to main menu. AWB SET . RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command

  9. 9 / 17 (4) AE SET 4.1 AE Mode Set : This function is for changing to AE mode. AE AE MODE IRIS MAN . . . . . AE AE MODE AGC MA.N . . . AE AE MODE Auto . . . . . MENU . AE SET . . . A) Set up “AE SET” in main menu using Protocol command or Demo. Soft ware. B) Select the “AE MODE” in submenu. Using Tele/wide Command, C) Set the mode auto, iris MAN , AGC MAN, Manual, Auto using Near/Far Command. 4.2 IRIS ADJUST Set : This function is available for IRIS MAN mode. AE . IRIS ADJUST 85 MIN . . . AE . IRIS ADJUST 221 MAX . . . AE . IRIS ADJUST ## . . . A) Select the “IRIS ADJUST” in submenu. Using Tele/wide Command, B) Adjust the level from 85 MIN to 221 MAX. * ## : Current level at Auto mode. 4.3 AGC ADJUST Set : This function is available for AGC MAN mode. AE . IRIS ADJUST 0 . . . AE . IRIS ADJUST 255 . . . AE . IRIS ADJUST ## . . . A) Select the “IRIS ADJUST” in submenu. Using Tele/wide Command, B) Adjust the level from 85 MIN to 221 MAX. * ## : Current level at Auto mode.

  10. 10 / 17 4.4 BRIGHTNESS ADJUSTMENT Set : AE . BRIGHTNESS 0 . . . AE . BRIGHTNESS 99 . . . AE . BRIGHTNESS ## . . . A) Select the “BRIGHTNESS” in submenu. Using Tele/wide Command, B) Adjust the level from 0 MIN to 99 MAX. * ## : Current level at Auto mode. 4.5 BACKLIGHT Set : AE . BACKLIGHT ON . . . AE . BACKLIGHT AUTO . . . AE BACKLIGHT OFF . . . A) Select the “BACKLIGHT” in submenu. Using Tele/wide Command, B) Set the mode OFF, ON, or AUTO using Near/Far Command. * Auto BLC (Auto back light compensation) When a back light condition occurs in area1,area2, area3, or area4. the back light compensation is enable. When the back light condition disappears in that area, BLC is disable automatically. If do not want this mode, set to OFF Area 1 Area 0 Area 2 Area 3 Area 4 4.6 FLICKERLESS Set : AE SET . FLICKERLESS ON . . . AE SET . FLICKERLESS OFF . . . A) Select the “FLICKERLESS” in submenu. Using Tele/wide Command, B) Set the mode OFF, ON using Near/Far Command. * FLICKERLESS ; Use for removing the flicker of picture . ON : Remove the flicker ( In case of NTSC System ; Shutter Speed 1/100 sec In case of PAL System ; Shutter Speed 1/120 sec ) .

  11. 11 / 17 4.7 SHUTTER SPEED Set : AE SET . SHUTTER 1/250 . . . AE SET . SHUTTER 1/10000 . . . AE SET . SHUTTER NORMAL . . . A) Select the “SHUTTER” in submenu. Using Tele/wide Command, B) Set the mode NORMAL, 1/100 ~ 1/10000 using Near/Far Command. 4.8 INITIAL SET : If initial mode set to ON, All AE function is changed to the factory setting AE SET . INITIAL SET OFF . . . . AE SET . INITIAL SET ON . . . . A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 4.9 RETURN TO MAIN MENU : This function is exit to main menu. AE SET . RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command

  12. 12 / 17 (5) SPECIAL SET 5.1 User Title Set : This function is for custom title on screen display. SPECIAL SET USER TITEL - - - - - - . . . . . MENU . SPECIAL SET . . . A) Set “SPECIAL SET” in main menu using Protocol command or Demo. Soft ware. B) Select the “USER TITLE” in submenu. Using Tele/wide Command, C) Set the position of title and set data using Tele / Wide, Near/Far Command. 5.2 SHARPNESS ADJUST Set : SPECIAL SET . SHARPNESS 0 . . . SPECIAL SET . SHAPRNESS 15 . . . SPECIAL SET . SHARPNESS 10 . . . A) Select the “SHARPNESS” in submenu. Using Tele/wide Command, B) Adjust the level from 0 to 15. 5.3 MIRROR Set : SPECIAL SET . MIRROR OFF . . . SPECIAL SET . MIRROR ON . . . A) Select the “MIRROR” in submenu. Using Tele/wide Command, B) Select the mode ON, OFF using Near/Far command.

  13. 13 / 17 5.4 COLOR Set : This mode is for B/W mode. SPECIAL SET . COLOR OFF . . . SPECIAL SET . COLOR ON . . . A) Select the “COLOR” in submenu. Using Tele/wide Command, B) Select the mode ON, OFF using Near/Far command. 5.5 NEGATIVE Set : This mode is to change color and luminance to negative. SPECIAL SET . COLOR OFF . . . SPECIAL SET . COLOR ON . . . A) Select the “COLOR” in submenu. Using Tele/wide Command, B) Select the mode ON, OFF using Near/Far command. 5.6 WIDE BURST Set : This mode is to change color burst width for long distance application. SPECIAL SET . WIDEBURST OFF . . . SPECIAL SET . WIDEBURST ON . . . A) Select the “WIDEBURST” in submenu. Using Tele/wide Command, B) Select the mode ON, OFF using Near/Far command. 5.7 INITIAL SET : If initial mode set to ON, All SPECIAL functions are changed to the factory setting SPECIAL SET . INITIAL SET OFF . . . . SPECIAL SET . INITIAL SET ON . . . . A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command

  14. 14 / 17 5.8 RETURN TO MAIN MENU : This function is exit to main menu. SPECIAL SET . RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command (6) MOTION DETECTION SET 6.1 DETECTION Mode Set : MOTION MOTION OFF . . . . . MOTION DETECTION ON . . . . . MENU . MOTION DET . . . A) Set “MOTION” in main menu using Protocol command or Demo. Soft ware. B) Select the “DETECTION” in submenu. Using Tele/wide Command, C) Set the mode ON, OFF using Near/Far Command. 6.2 LEVEL ADJUST Set : This function is available for DETECTION ON mode. MOTION . LEVEL SET ------------- . . . MOTION . LEVEL SET ## . . . A) Select the “LEVEL SET” in submenu. Using Tele/wide Command, B) Adjust the level to some sensitivity. * ## : Current value in motion detection ON mode. 6.3 INITIAL SET : If initial mode set to ON, All MOTION functions are changed to the factory setting MOTION . INITIAL SET OFF . . . . MOTION . INITIAL SET ON . . . . A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command

  15. 15 / 17 6.4 RETURN TO MAIN MENU : This function is exit to main menu. MOTION . RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command (7) F. OSD SET 7.1 FUNCTION Set : F. OSD FUNCTION DISP ON MOTION DET DISP ON CAMERA ID DISP ON ZOOM MAG DISP ON USER TITLE DISP ON INITIAL DISP ON INITIAL SET ON F. OSD FUNCTION DISP OFF MOTION DET DISP OFF CAMERA ID DISP OFF ZOOM MAG DISP OFF USER TITLE DISP OFF INITIAL DISP OFF INITIAL SET OFF MENU . F. OSD . . . A) Set F. OSD ” in main menu using Protocol command or Demo. Soft ware. B) Select the mode what you want in submenu. Using Tele/wide Command, C) Set the display mode of OSD using Tele / Wide, Near/Far Command. * INITIAL SET and RETURN are the same as before procedure. (8) E. SENSITIVITY SET: Not used

  16. 16 / 17 8.2 INITIAL SET : If initial mode set to ON, E.SENSITITY functions are changed to the factory setting E SENSITIVITY . INITIAL SET OFF . . . . E SENSITIVITY . INITIAL SET ON . . . . A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 8.3 RETURN TO MAIN MENU : This function is exit to main menu. E SENSITIVITY . RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command

  17. 17/ 17 (9) WDR: 9.1 WDR SET WDR . WDR CONTROL OFF . . . WDR . WDR CONTROL ON . . . WDR . WDR CONTROL AUTO . . . MENU . WDR . . . A) Select the “WDR” in main menu using Protocol command or Demo. Soft ware B) Select the “WDR CONTROL” in submenu. Using Tele/wide Command, B) Select the WDR mode what you want in submenu. Using Near/Far Command * Mode sequence : OFF-- ON -- AUTO * WDR Auto mode is working at the condition of high light back light. 9.2 LEVEL ADJUST Set : This function is the gain adjustment of WDR WDR . SENSITIVITY ------------- . . . WDR . SENSITIVITY ## . . . A) Select the “SENSITIVITY” in submenu. Using Tele/wide Command, B) Adjust the level to some sensitivity using Near / Far Command. * ## : Current value of SENSITIVITY is before setting value. 9.3 INITIAL SET : If initial mode set to ON, All WDR functions are changed to the factory setting WDR . INITIAL SET OFF . . . . WDR . INITIAL SET ON . . . . A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 6.4 RETURN TO MAIN MENU : This function is exit to main menu. WDR . RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command

More Related