Use of Fall Arresters and Torque Wrench Set

1. Use of Fall Arresters and Torque Wrench Set

2. Fall Arrester: Fall Arrest systems are devices used to protect you after you fall: they stop the fall before the person using it hits the surface. It is used as a safety device. This process uses a grabbing device connected to a reliable anchor, which arrest and diminishes a fall's chances. It stops you from falling on the ground or a structure while limiting the forces on the body. While working near a tenuous surface, narrow ledge, or unusual building or may be a rooftop; there is a fair chance you might fall off the building. That's where fall arresterscome into play. Fall Arrester: Fall Arrest systems are devices used to protect you after you fall: they stop the fall before the person using it hits the surface. It is used as a safety device.

3. This process uses a grabbing device connected to a reliable anchor, which arrest and diminishes a fall's chances. It stops you from falling on the ground or a structure while limiting the forces on the body. While working near a tenuous surface, narrow ledge, or unusual building or may be a rooftop; there is a fair chance you might fall off the building. That's where fall arresterscome into play. • Torque Wrenches Set: It is a tool used to check and apply a specific torque to a fastener like bolts and nuts. It is a crucial but basic element in general mechanics. It is generally used for tire changing operations and industrial maintenance and repair industries to ensure customers' safety. • A torque wrench set is a tightening tool. It is a very sensitive and precise tightening tool. It should never be used to loosen bolts. • The tool should always be stored in its storage box and protected from any shock. • While using a torque wrench, make sure that you use only one hand and a fluent and continuous move. • Never use any extension on the handle as this would impair the set value in being correctly signaled.

4. A torque wrench can prevent but cannot avoid over tightening! When we reach the required torque, the torque control system of the wrench will be activated. After that, the operator will hear a click sound. If you hear a "click" sound without moving the wrench at first, it implies that the system has already been over tightened. At this time, you should loosen the bolt, tighten it, and then finish with the torque wrench to get to the appropriate and safe torque. • It is a high precision tool, so it surely needs good maintenance. It is recommended to re-calibration the tool after every 5000 cycles at an official service center. Always remember to send the tool to service immediately as soon as it drops or gets damaged.

5. Contact Us Info@sekim-international.com +65 88663765 https://www.mixcoindustry.com/ https://www.facebook.com/mixcoindustry/ https://sg.linkedin.com/company/mixco-industry