1 / 8

Interlaboratory Testing: Preliminary Concepts

Interlaboratory Testing: Preliminary Concepts. Carolyn Cairns and Janet Carter 16 May 2013. Purpose for the Workshop. Present framework for ITG testing Develop recommendations on specifics for testing strategy

misae
Download Presentation

Interlaboratory Testing: Preliminary Concepts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Interlaboratory Testing:Preliminary Concepts Carolyn Cairns and Janet Carter 16 May 2013

  2. Purpose for the Workshop • Present framework for ITG testing • Develop recommendations on specifics for testing strategy • Workshop will provide solid recommendations to steering committee on path forward for ITG • Identify critical considerations for inter-laboratory testing

  3. ITG Charge To develop a testing strategy* to assess • Robustness • Reproducibility • Repeatability • Transferability of analytical methods available to detect nanoscale releases from selected nanocomposites for priority release scenarios *based on TG and SOS white papers

  4. Initial Approach • Small pilot project to explore feasibility of inter-laboratory testing • Quickly identify inconsistencies or deficiencies • Fine tune methods for broader testing • Design appropriate analytical and process controls • Creation and transport of samples • Identification of MWCNT • Polymer and polymer/MWCNT • Standardized material as laboratory control • Positive and negative controls

  5. Materials (CNT/Polymers) Suppliers Analytical Methods Development (e.g. particle count, SEM, AUC, etc.) Sample Generation Module Lab A Identify specific scenarios and CNT/polymer for consumer and occupational settings • A. Abrasion/ • Consumer Lab B Lab A • B. Sanding/ • Occupational Lab C Lab B Lab D CNT/polymer specific to uses subject to weathering • C. Weathering/ • Environmental Lab E

  6. Break Out Sessions • Make decisions regarding materials, scenarios, and methods to be used in Phase 3 – the interlaboratory testing • Decisions based on information obtained in TGs and SOS as well as Phase 2.5 document • Recommendations from breakout sessions will be sent back to steering committee for final analysis • Information from breakout sessions will be used for potential future studies

  7. Additional Considerations • Recruit labs to participate • Develop criteria for lab inclusion • Number of labs needed for initial pilot study • Amount of Funding and Mechanism of Funding • Develop CRADA or other enabling tools to foster cooperation and coordination – if needed • How and when to transition from pilot to method validation and standardization

More Related