Mars Rover PDR Team Name
330 likes | 510 Views
Mars Rover PDR Team Name. Presentation Outline. Provide a simple outline of the presentation If possible, indicate team member(s) who will preset each section. Team Organization. Single slide listing team members and role Can use an organization chart. Acronyms.
Mars Rover PDR Team Name
E N D
Presentation Transcript
Mars Rover PDR Team Name
Presentation Outline • Provide a simple outline of the presentation • If possible, indicate team member(s) who will preset each section
Team Organization • Single slide listing team members and role • Can use an organization chart
Acronyms • Provide a list of acronyms used throughout the presentation • Used as refernce only. Does not need to be read through
System Overview Presenter name here
Mission Summary • Overview of mission objectives • Include any external objectives
System Requirement Summary • Overview of system (mission) level requirements • Use bullets or table to demonstrate understanding of requirements
System Level Trade and Selection • Present preliminary system-level concepts considered • Configurations of rocket and rover • Present criteria for final configuration selection • Include sketches and diagrams of various concepts considered. • Include variations on CONOPS considered
System Concept of Operations • Provide overview of operations of the system from launch to landing to rover operations. • Launch and descent operations • Rover operations • Post-launch recovery • Simple flow diagrams and cartoons are a good way to present the CONOPS
Physical Layout • Diagram of rocket showing major components • Dimensions • payload location • Major components involved in deploying payload • Diagram of rover • Dimensions • Identify major components and their locations
Rocket Design Presenter Name
Overview of Rocket • Describe overall rocket design • Identify major components and locations • Rocket weight • Motor selection • Airframe diameter • Fins size and number of fins • Length of rocket • Identify CP and CG and distance between CP and CG • Explain overall operation including rover deployment and recovery deployment
Rocket Materials • Airframe material • Fin material • Nosecone material • Type of adhesives used • Rail button type • Motor retention
Rocket Recovery System • Parachute selection • Harness • Type of shock cord, lengths and strengths • Linkages and strengths • Attachment points, eyebolts, fender washers, etc. • Parachute protection
Rocket Recovery System Deployment Method • Motor ejection or Altimeter • Altimeter selection • Altimeter wiring diagram • Charge installation process • Arming process • Safety practices to avoid accidential firing during preparations • Ejection charge powder selection and quantity determination
Rocket Motor Selection • Primary motor selection • Backup motor selection • Thrust to weight ratio • Flight simulations • Identify simulation software • Expected altitude
Rover Design Overview • Show block diagram or picture of rover • Identify major components • Dimensions • Mass of rover
Rover Mechanics • Mechanical design description • Structure • Component placement • Material description
Rover Electronics • Electronic block diagram • Processors • Memories • Sensors • Drivers for mechanisms and actuators
Rover Power • Battery selection and configuration • Power capacity • Mounting method • Protection circuits • Short circuit • Over-discharge for lithium ion cells
Rover Power Distribution • Electrical Power System Design • Regulators • Power distribution to subsystems, mechanisms, actuators
Rover Markers • Describe the markers • Describe how the markers are released
Rover Software Design • Flow Chart of software • Identify software states and how software transitions to each state • Power up • Integration • Launch • Deployment • Landing • Ground operation
Rover Payload Integration • Describe design and construction of payload section • Any mechanisms that interact with rover • Describe how rover is configured for payload integration • Describe process of payload integration
Rover Testing • Describe testing of rover subsystems • Describe testing during subsystem integration • Describe functional testing
Rocket Testing • Describe testing of rocket • Parachute deployment testing • Payload deployment testing • Flight test
Flight Operations • Describe procedures during launch day • Rocket preparation • Rover Preparation • Rover integration into rocket • Preparations at the launch pad
Program Schedule • Show schedule of the complete development cycle up to time of launch • Component and service schedule • When components are bought and lead times for components • Services required (contract machining, PCB, etc.)
Program Budget • Show budget for all parts of the program • Components • Services • Travel expenses
Summary • Describe state of development efforts, any accomplishments, issues, and way forward
Instructions • Slides are a template describing information needed. • Each section can be expanded into more slides as needed. Don't try cramming each listed topic on the same slide. • Place team/school logo in the top left corner. • Put page numbers on the slides. • Formatting and background can be customized. This document is distributed as PDF to encourage you to make your own. • Do not include animations or videos as reviewers may not have compatible software. • Submit PDR in pdf format for maximum compatibility. • Do not include this slide in the presentation. Yes, some one will.
