1 / 1

Design of passive, stall controlled wind turbine blade

Design of passive, stall controlled wind turbine blade. PhD Candidate: Etana Ferede Department : AWEP Section: Wind Energy & Structures Supervisor : dr. M. M. Abdalla Promoter: dr. G.J.W. van Bussel Start date: 1-10-2011 Funding: FLOW Cooperation: 2-B Energy.

mikko
Download Presentation

Design of passive, stall controlled wind turbine blade

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Design of passive, stall controlled wind turbine blade PhD Candidate: EtanaFerede Department: AWEP Section: Wind Energy & Structures Supervisor: dr. M. M. Abdalla Promoter: dr. G.J.W. van Bussel Start date: 1-10-2011 Funding: FLOW Cooperation: 2-B Energy Iso-Geometric Analysis(IGA):Concept Difference between CAD-FEM and IGA CAD and IGD use the same basis functions No approximation of the geometry during analysis Circumvent difficulty during mesh generation PDEs are solved using NURBS Parameterization of wind turbine blade Beam axis: Airfoil: Twist: Cg: • Background • There in an increased interest for offshore wind farms due to their promising capability for large scale energy production. However offshore wind turbines need to be designed such that they require minimum amount of maintenance due to the fact that the maintenance cost of offshore wind turbines is significantly larger than their onshore counterparts. One way of achieving this is looking at the control systems, especially the pitch system and finding a way of replacing it or at the very least minimizing its operation. In addition, the removal of the pitch system has snow ball effect on the total mass of the wind turbine thus reducing further the initial capital cost. An alternative approach to regulate the power is the stall control method. • The research goal is to design stall controlled wing turbine using the twist coupling effect of the structure to induce stall while minimizing the cost of energy. • For the stall control method, the wind turbine blade is rotated(active or passive) to stall thus reducing the torque and power. In order to regulate the power production of wind turbine passively, the structural twist coupling is optimized using ISO geometric design approach. • Definition of B-splines(Bi): • = non-uniform knot vector in • Properties of B-splines: • Piecewise polynomials of degree p • Non-negative partition of unity • The function is non zero in • Progress • Cross-sectional modeller • Parametric model of wind turbine blade • Beam model • Shell model • NURB based non-linear Timoshenko beam Aerospace Engineering 2 bladed, 5MW stall controlled wind turbine Method for twist coupling Geometrical Structural Material • Publications • E. Zupan, M. Saje, D. Zupan, (2009) “The quaternion-based three dimensional beam theory”, Computational methods, pp 3944-3956 • M.M. Willaert, M.M. Abdalla, Z. Gurdal, (2010) “A simple finite element cross-sectional modelling of thin-walled beams” • J. Cottrell, T. Huges, Y. Bazilevs, (2009) “Finite Element Procedures”, Wiley • J. Cottrell, T. Huges, Y. Bazilevs, (2009) “Isogeometric Analysis”, Wiley

More Related