1 / 7

Different Types of Chemicals Needs to remove while Waste Water Testing

Chemical treatment of wastewater is an important procedure for different industries. It is quite a complex process and involves many steps before the final product can be achieved.

metslab
Download Presentation

Different Types of Chemicals Needs to remove while Waste Water Testing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Different Types of Chemicals Needs to remove while Wastewater Testing Middle East Testing Services L.L.C

  2. Introduction Chemical treatment of wastewater is an important procedure for different industries. It is quite a complex process and involves many steps before the final product can be achieved. Paper and energy production are some of the many uses for the chemical treatment of wastewater. There are a variety of chemicals that are needed for wastewater testing and treatment. Each of them has a clear-cut application. Here are some of the types of such chemicals.

  3. Coagulants • There is a need to match the industry standard, and hence, there are multiple procedures and tests that have to be done. Only then can the wastewater be sanctioned as suitable. Arsenic, pathogens, and other harmful chemicals can be removed with the help of coagulants in water. • Wastewater is full of such harmful substances, but coagulants work effectively. It aids the procedure of the water particles getting attracted towards each other alternatively of repelling. Then, these can be filtered out, finally leaving just the wastewater.

  4. Controlling odor The foremost aspect of wastewater testing is the removal of toxic substances and chemicals. Odour control also becomes a part of it: • There are multiple methods of getting rid of the odour and waste that stinks. • Oxidation and biofiltration are some of the best methods to remove the pungent smell and go ahead with water testing and filtering. • These contaminants are dangerous as well. Chemical treatment is a must with these contaminants because of their toxicity. • After that, one can proceed with the biological water handling. Hexavalent chromium is an example of such a substance that, upon contamination of the water, can lead to severe consequences. Birth defects and terminal diseases are all part of the noxious impact of these deadly substances on the body.

  5. There is always a range for injurious overflow caused due to the foam created in the procedure. Wastewater treatment has multiple steps, and in the procedure, the air gets trapped, and foam starts forming up. Defoamers are generally used to reduce the amount of this extra foam and trapped air. It will help the procedure of wastewater administration and testing. Defoamers

  6. Ferrous sulfate and sodium bisulfate are the two most common reducing agents that help in cleansing the wastewater. They are often referred to as oxidizing agents as well. These oxidizing agents are useful when it comes to removing harmful substances like hydrogen peroxide, chlorine, etc. Reducing agents

  7. CONTACT US Middle East Testing Services L.L.C Address: Exhibition-Showroom No.4, Jurf Industrial Zone 1 Ajman UAE Phone: +971 589505070 / +971 589505077 Website:https://metslab.com/

More Related