1 / 13

Unit 10

Unit 10. Welding, Brazing and Cutting. Safety Principles. General safety rules apply in ANY shop! Always observe all rules and procedures given by instructor Proper PPE should be worn at ALL TIMES Jeans with no frays Cotton long sleeved shirt Close toed shoes/boots

mervyn
Download Presentation

Unit 10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Unit 10 Welding, Brazing and Cutting

  2. Safety Principles • General safety rules apply in ANY shop! • Always observe all rules and procedures given by instructor • Proper PPE should be worn at ALL TIMES • Jeans with no frays • Cotton long sleeved shirt • Close toed shoes/boots • Safety glasses and helmets • Know where fire extinguishers are located in case of emergency Jupiter Images

  3. Fire Extinguisher Classifications

  4. Basic Welding Processes • SMAW • Stick welding, use electrode to melt metals • Typically the first process learned • Used for repair and maintenance • Popular in agricultural industry • GMAW • Gas metal arc welding, use wire fed through MIG gun • Relies on inert gas • More expensive • Superior results Jupiter Images

  5. Basic Welding Processes • GTAW • Gas tungsten arc welding (another form of GMAW) • Slower • High quality welds • OFW • Oxyfuel welding (fusion and braze) • Electrode rod with base metal Jupiter Images

  6. Electrode Rods and Wires • ElectrodeRods • Welding rod coated with flux • Different rods are available • Differ in tensile strength and flux coating • Electrode Wires • Packed in spools • Classified differently • Differ in tensile strength Jupiter Images

  7. Electrode Rod

  8. Electrode Wire

  9. Welding Positions

  10. Welding Positions

  11. Welding Joints

  12. Welding Joints

  13. Oxyacetylene and Plasma Arc Cutting • Oxyacetylene cutting- • Used on ferrous metal (steel) • Portable, useful in agricultural industry • Plasma cutting- • Stationary or handheld • Can be run by computer • Plasma Arc SAFETY • Higher voltage • Never use in damp, wet areas • Use ear plugs/muffs • Proper PPE Jupiter Images

More Related