Stack-up Verification 2K. Newly Improved. Features : Quick selection of Standard Parts via pull down menu lists. Pop-ups prompt you to decide whether the extra washers selected are optional or required before modifying the main list.
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
To calculate simply press the ‘Calculate’ button.
The ‘Large Data’ button leads to a table where individual parts with optional description can be added to a maximum of twenty prior to being transferred to the main table.
i.e. If the ‘Min. Bolt’ states ‘ACCEPTABLE’ and the ‘Max. Bolt’ states ‘ADJUST’ adding optional washers would correct it.
Enter required grip. If many parts have to be considered, select the ‘LARGE DATA’ button, then add all required parts to that list.
Based on the grip entered, a hint of the approximate bolt length required is shown prior to the bolt selection.
Example Step 1.
Example Step 2. select the ‘
Example Step 3. select the ‘
Example Step 4. select the ‘
Example Step 5. select the ‘
Example Step 6. select the ‘
Example Step 7. select the ‘
Select the ‘ select the ‘CALCULATE’ button.
Example Step 8.
In this case it’s optional. select the ‘
Example Step 9.
In this case it’s also optional. select the ‘
Example Step 10.
All the resultant values and the output Min. & Max. cases are shown, including the acceptance verification.
There’s also an optional ‘Countersunk’ washer list for use under the bolt head when required and the thickness values are automatically entered.
Option for Countersunk Washer.
This is a very flexible stack-up program, it allows the user to input Non-Standard values or modify calculated program values prior to the output.
It calculates the standard hardware values automatically and provides guiding remarks to achieve acceptability.
In conclusion, this program would be an asset to an organization that wants to:
1) Improve accuracy.
2) Improve consistency.
3) Ensure that the correct bolt length is ordered, sometimes lead time is an issue.
4) Modify values before calculating the output.
5) Save many hours on stack-ups, it would take minutes to obtain an accurate result.
Please contact us: http://AeroTechSmart.com
A license for use is available.