Announcements

1. Announcements • HW6 due this Wednesday • Output of SampleRun 1: 2000 2009 Konya Turkey 2000 2009 Tuzla Turkey 2000 2009 IstanbulTurkey • Name of output file in SampleRun3: 2000_2002_Turkey.txt • HW7 will be assigned this week and will be due January 6th Wednesday (last week) • YoumayseeyourMidterm2 paperson Thursday, 12:30 – 14:30 in FENS L068 (Office Hour Room). • Please complete the Course Evaluations • BAGEM should have sent a message about this

2. Announcements about HW6 • You may need to use clear() member function before you try to reopen an input file stream object • that you failed to open previously (for example due to wrong file name), or • that you opened and processed but for some reason if the error flags are set (for example due to reaching the end of the file). • Possible reasons for run time errors in this homework • Attempting to read from a file that has not been opened yet • Attempting to write to a file that has not been opened yet • Range and index problems while trying to access characters of a string using find, substr and at member functions.

3. Announcements about HW6 • “Should we check if the output file is opened successfully or not?” • Not required, but advised • There might be some cases that the output files are not opened successfully • If you check and the output file is not opened, then do not continue with the program. • What happens if the files are opened but the content is irrelevant? • What happens if the file names are entered in the wrong order? • What happens if both file names are the same? • All of these questions are reduced into the same main question: should we make the content check for the files that are opened successfully? • NO. As mentioned in the HW document, the content of the files are assumed to be correct. What you have to do is only to check if the files are opened successfully or not and continue to read file names until opened. Once opened, we assume that the first file is the business database, and the second one is the distance database files.

4. Example • Counting letters of a file • display number of occurrences of each letter at the end • counting iscase insensitive • see letters.cpp (the one in book is a bit different)

5. tvector as a return type • Vector can be return type of a function tvector<int> Count (istream & input, int & total); • Example: modify letters.cpp such that count returns the vector (not as reference parameter) • see letters2.cpp

6. gpa gpa gpa id id id 1250 1251 1260 3.2 name name name lastname lastname lastname Vectors of structs 0 • We can define vectors of structs struct student { unsigned int id; string name, lastname; double gpa; }; tvector<student> class(11); // a vector with 11 students class[1].gpa = 3.2; for (i = 0; i <= 10; i++) class[i].id = i + 1250; 1 10

7. Vector of struct • Example • define a struct for a track on a CD • track number and title are fields • define a vector for 10 tracks • shuffle these 10 tracks at random • see shuffle.cpp (in book, but this version is slightly modified)

8. Vectors as lists • The “vector as counters” example constructs and initializes a vector with a specific number of elements • Other uses of vector require the vector to “grow” to accommodate new elements • Consider reading words from a text file, storing them in a vector • How big should we define vector initially? What are potential problems? • When a vector is used as a list, we’ll use a different method for adding elements to the vector so that the vector can “grow”

9. Reading words into a vector (problematic version) tvector<string> words(1000); string w; int i = 0; string filename = PromptString("enter file name: "); ifstream input(filename.c_str()); while (input >> w) { words[i]=w; i++; } cout << "read " << i << " words" << endl; • What is the problem? • there might be more than 1000 words in the file • in this case index runs out of range

10. Reading words into a vector (with index range control but still problematic) tvector<string> words(1000); string w; int i = 0; string filename = PromptString("enter file name: "); ifstream input(filename.c_str()); while ((input >> w) && (i < 1000)) { words[i]=w; i++; } cout << "read " << i << " words" << endl; • What is the problem? • works fine if there are no more than 1000 words • but if there are more than 1000 words, the rest is not read

11. Reading words into a vector (no problems) • One method would be to pass over the file two times • one to find out number of words • second to read the words into array • Another method is to benefit from tvector class utilities as in the following code tvector<string> words; //create empty vector string w; string filename = PromptString("enter file name: "); ifstream input(filename.c_str()); while (input >> w) { words.push_back(w); //adds the next word to the vector //also increases the size if necessary } cout << "read " << words.size() << " words" << endl;

12. Using tvector::push_back • The method push_back adds new objects to the “end” of a vector, • Internally, the vector keeps track of its capacity • If there is capacity, then there is no problem; the new item is added to the end of the vector • When the capacity is reached and push_back attempts to add a new element to the vector, then the vector automatically “grows” by doubling the capacity • 0, 2, 4, 8, 16, 32, ... • If you want to use push_back mechanism, then the vector should be defined initially without specifying a size • empty vector (zero size)

13. Size versus Capacity • Capacity is the allocated size of the vector • Size is how many elements are in the vector so far • They are not the same concepts, but related as described in the previous slide and illustrated below tvector<string> names; // size is 0, capacity is 0 names.push_back("Ali"); // size is 1, capacity is 2 names.push_back("Husnu"); // size is 2, capacity is 2 names.push_back("Ayse"); // size is 3, capacity is 4 names.push_back("Cem"); // size is 4, capacity is 4 names.push_back("Jale"); // size is 5, capacity is 8

14. size()member function • size() member function basically returns the number of elements in the vector • When a vector is defined with no initial capacity, and push_back is used to add elements, size() member function returns the number of elements exist in the vector • This is the number of calls of push_back() if no elements are deleted • If elements deleted using pop_back(), size updated too (decremented) • If a non-empty vector is created, then the capacity and the size is set to the number of elements of the vector. This capacity is considered full, so the first push_back causes to double the capacity. • What about size() in case the vector is created as a non-empty one • returns the size specified during declaration if no push_back() is used • returns the size specified during declaration + the number push_back()s, if push_back() is used

15. capacity()and reserve() • The capacity of vector is accessible using capacity() member function • programmers don’t often need this value • An initial capacity of N elements can be specified using reserve(N) member function

16. Demo Example • Read some strings from keyboard and store in a tvector of strings. At the end display the vector. • version 1: no reserve • version 2: (decomment the reserve lines): with reserve • version 3: vector is not created empty (decomment second definition and comment out first one and reserve lines) • See tvectordemo.cpp (not in the book)

17. Vector Processing Examples – 1 (vectorproc.cpp – not in book) • write a function that takes a tvector of integers as parameter and returns the maximum of numbers in it • process all array elements – for loop from 0 to vector’s size-1 int max (const tvector<int> & v) //pre: vector v is not empty //post: return max of elements in v { int i, max_so_far = INT_MIN; for (i=0; i < v.size(); i++) { if (v[i] > max_so_far) { max_so_far = v[i]; } } return max_so_far; }

18. Vector Processing Examples – 2 (vectorproc.cpp – not in book) • Write a function that takes a tvector of integers as parameter and returns true if the vector is sorted in ascending manner, false otherwise • may not process all vector elements • In this type of rule-checking applications, a possible method is to assume that the rule is satisfied before the loop and find a counterexample in the loop bool issorted (const tvector<int> & v) //post: returns true if the array is acsending sorted { bool s = true; // initially assume that array is sorted //in the function try to break this assumption int i =1; while (i < v.size() && s == true) { //check until the end of array or until a counterexample is found if (v[i-1] > v[i]) // if not sorted s = false; // counterexample is found i++; } return s; }

19. Searching a vector • We can search for one occurrence, return true/false or the index of occurrence • Search the vector starting from the beginning • Stop searching when match is found • We can search and count the number of occurrences and return count • Search entire vector • Similar to one occurrence search, but do not stop after first occurrence • We can search for many occurrences, but return occurrences in another vector rather than count • In all these cases, we search the vector sequentially starting from the beginning • This type of search is called “sequential search”

20. Counting search int countmatches(const tvector<string> & a, const string& s) // post: returns # occurrences of s in a { int count = 0; int k; for(k=0; k < a.size(); k++) { if (a[k] == s) { count++; } } return count; } • How can we change this code to return the index of the first occurrence? • see next slide

21. One occurrence search int firstmatch(const tvector<string> & a, const string& s) // post: returns the index of occurrence of s in a, -1 // otherwise { int k; for(k=0; k < a.size(); k++) { if (a[k] == s) { return k; } } return -1; } • Does not search the entire array if one match is found • good for efficiency purposes • How could you modify this to return true/false?

22. Collecting search • Collect the occurrences in another vector void collect(const tvector<string> & a, tvector<string> & matches) // pre: matches is empty // post: matches contains all elements of a with // first letter 'A' { int k; for(k=0; k < a.size(); k++) { if (a[k].substr(0,1) == "A") { matches.push_back(a[k]); } } }

23. Binary search • Alternative to sequential search for sorted vectors • If a vector is sorted we can use the sorted property to eliminate half of the vector elements with one comparison • What number (between 1 and 100) do we guess first in number guessing game? • Idea of creating program to do binary search • Check the middle element • If it has the searched value, then you’re done! • If not, eliminate half of the elements of the vector • search the rest using the same idea • continue until match is found or there is no match • how could you understand that there is no match? • let’s develop the algorithm on an example • we need two index values, low and high, for the search space

24. Binary Search (search for 62) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 102434 5255 62 67 75 80 819092100101111 low=0 mid=7high=14 low = 0 mid=3high=6 low=4 high=6 mid=5 => FOUND

25. Binary Search (search for 60) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 102434 5255 62 67 75 80 819092100101111 low = 0 mid=7high =14 low=0 mid=3high=6 low=4 high=6 mid=5 low=4 high=4 mid=4 low=5 high=4 => NO MATCH FOUND – STOP

26. Binary search code int bsearch(const tvector<string>& list, const string& key) // pre: list.size() == # elements in list // post: returns index of key in list, -1 if key not found { int low = 0; // leftmost possible entry int high = list.size()-1; // rightmost possible entry int mid; // middle of current range while (low <= high) { mid = (low + high)/2; if (list[mid] == key) // found key, exit search { return mid; } else if (list[mid] < key) // key in upper half { low = mid + 1; } else // key in lower half { high = mid - 1; } } return -1; // not in list }

27. Comparing Sequential and Binary Search • Given a list of N elements: • Binary search makes on the order of log N operation O(log N) • Linear (sequential) search takes on the order of N operations O(N)