1 / 11

E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer

E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer. 16810, Avenue of Fountains, Suite # 108, Fountain Hills, AZ 85268, U.S.A. Phone : +1 (480) 816-8672 Fax : +1 (480) 816-0115 E-mail : sales@oriontelecom.com Web Site: http://www.oriontelecom.com. Updated : January, 2006.

melvinr
Download Presentation

E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer 16810, Avenue of Fountains, Suite # 108, Fountain Hills, AZ 85268, U.S.A. Phone: +1 (480) 816-8672 Fax: +1 (480) 816-0115 E-mail: sales@oriontelecom.com Web Site: http://www.oriontelecom.com Updated : January, 2006

  2. E2 , 2Mbps x 4 - Opti Multiplexer FEATURES • A compact solution that performs E1 to E2 multiplexing and de-multiplexing and provides an 8Mbps optical interface (8Mbps OLTE) in a single card • Conforms to ITU recommendations G.742 • Performs Second order Mux as per G.742 • Loss of signal and AIS detection as per G.775 • Tributary and higher order loop backs supported • Supports tributary loop backs for commands received from far end based on stuff bit polarity • Single-card implementation • Highly reliable and compact. • Standard CCITT Interfaces • Class I Laser.

  3. E2 , 2Mbps x 4 - Opti Multiplexer HIGHLIGHTS • Remote and local terminal monitoring and control through a PC Com port using • VCL- Opti Multiplexer, Network Management System. • Extensive alarms and status indication facility. • Operates on nominal - 48 VDC input • Distributed on-board power supply. • Microprocessor controlled with powerful diagnostic facilities for both remote and local systems. • Local and remote loop back facility for the 8Mbps stream for diagnostics. • Programmable auto-laser shut down feature for greater safety. • Capable of synchronizing on any of the clock sources - internal, or extracted (loop-timed).

  4. E2 , 2Mbps x 4 - Opti Multiplexer FRONT PANEL VIEW OF VCL-E2 Opti Multiplexer Tx Rx VCL-E2 Opti Multiplexer 1 2 3 4 5 7 6 19 inch Shelf LEDs Indications +5 VDC present -48 VDC present Loss of signal at 2Mbps - channel 4 Loss of signal at 2Mbps - channel 3 Loss of signal at 2Mbps - channel 2 Loss of signal at 2Mbps - channel 1 AIS at 8Mbps Optical signal - Sync Green = Sync., Optical signal present Red = Loss of Sync., Optical signal absent.

  5. E2 , 2Mbps x 4 - Opti Multiplexer REAR VIEW OF VCL-E2 Opti Multiplexer(120 Ohms Ver.)(120 Ohms balanced E1 ports) 120 Ohms, RJ-45, E1 Interface Connectors - 4, E1 Channels Power Audio Alarm Video Alarm Network / System Management Port

  6. E2 , 2Mbps x 4 - Opti Multiplexer REAR VIEW OF VCL-E2 Opti Multiplexer(75/120 Ohms Ver.)(120 Ohms balanced, 75 unbalanced E1 ports) E2 Opti Multiplexer Back View 75 Ohms, BNC, E1 Interface Connrctors - 4, E1 channels

  7. E2 , 2Mbps x 4 - Opti Multiplexer Technical Specifications 2Mbps, E1 Electrical Interface Number 1 Nominal bit rate 2048kbps Bit rate tolerance ± 50ppm Termination Impedance 120 Ohms / 120 Ohms and 75 Ohms Line code HDB3 Frame structure as per G.704 Electrical Interface as per G.703 Peak Voltage of a mark For 120 W Balanced interface 3.0 V ± 0.3 V 75 W Unbalanced interface 2.37 V ± 0.237 V Peak Voltage of a space for 120 W Balanced interface 0 V ± 0.3 V 75 W Unbalanced interface 0V ± 0.237 V Continue..

  8. E2 , 2Mbps x 4 - Opti Multiplexer Technical Specifications Maximum Output Jitter 0.05UI Maximum Input Jitter 20Hz to 93 Hz 1.5UI 700Hz to 100Hz 0.2UI Connectivity RJ-45 Connectors, BNC Connectors Cable 120 ohms balanced, 75 Ohms unbalanced Permissible Attenuation 6 dB (max) @1024 Khz Return Loss at input port: 51.2 KHz to 102.4 KHz >12dB 102.4KHz to 2048 KHz >18dB 2048 KHz to 3072 KHz >14dB Continue..

  9. E2 , 2Mbps x 4 - Opti Multiplexer Technical Specifications 8 Mbps, Optical Interface TRANSMITTER: Type of Transmitter Class I Laser Number 1 Nominal bit rate 8.448 Mbps, +/-30PPM Kbps Transmit wavelength 1310nm Transmit output 0dBm to -3dBm (average) Extinction ratio >1:10 Transmit Spectral Width <4nm RECEIVER: Number 1 Receiver sensitivity -37dBm (typical) -36dBm (min) Receive wavelength 1310nm Operating wavelength range 1280-1335nm Receiver dynamic range 20dBm Optical Connectors FC-PC connector

  10. E2 , 2Mbps x 4 - Opti Multiplexer Orion’s Products • Digital Access Cross Connects - E1 / T1 , E3, DS3, 10/100 BaseT Ethernet • Groomers (Hi-Z Non-intrusive Hi-Impedance Monitoring) • 1+1 APS (Automatic Protection Switching) • Echo Canceller & Voice Quality Enhancement Solutions - E1, T1, DS3 and STM-1 • E1 Drop-Insert (Add-Drop) Voice and Data Multiplexers • E1, T1, E3, DS3, Ethernet Converters • STM-1 Add Drop Multiplexer with Ethernet • GSM Gateways - E1/T1 • E1 PRI ISDN (Euro ISDN) Q.931 Multiplexers • Channel Banks • E2 (4 E1), 2/34 Mbps PDH Multiplexer, 34 Mbps OLTE • Remote Site Monitoring Equipment

  11. E2 , 2Mbps x 4 - Opti Multiplexer Thank you for your attention For more details visit us at our Website at http://www.oriontelecom.com 16810, Avenue of Fountains, Suite # 108, Fountain Hills, AZ 85268, U.S.A. Phone: +1 (480) 816-8672 Fax: +1 (480) 816-0115 E-mail: sales@oriontelecom.com Web Site: http://www.oriontelecom.com

More Related