1 / 11

Lecture # 9

Lecture # 9. Stress Concentrations. Objective:. To find stress within a member of abrupt change in shape. Stress Concentrations Factors. Figure:. Figure:. Example:.

mbeckles
Download Presentation

Lecture # 9

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture # 9 Stress Concentrations Objective: To find stress within a member of abrupt change in shape.

  2. Stress Concentrations Factors

  3. Figure:

  4. Figure:

  5. Example: A steel bar has the dimensions as shown in figure. If the allowable stress is allow = 115 MPa, determine the largest axial force P that the bar can carry.

  6. Solution: Because there is a shoulder fillet, the stress-concentration factor can be determined using the graph as in the previous figure. Calculating the necessary geometric parameters yields Thus, from the graph, K = 1.4

  7. Solution: Computing the average normal stress at the smallest cross-section, we have Applying equation with allow = max yield allow = Kavg 115 N/mm2 = 1.4(0.005 P) P = 16.43 (103) N Ans….. = 16.43 kN

  8. Problem: • Determine the maximum normal stress developed in the bar when it is subjected to a tension of P = 8 kN. • If the allowable normal stress for the bar is allow = 120 MPa, determine the maximum axial force P that can be applied to the bar.

  9. Solution:

  10. Solution:

  11. The enD

More Related