1 / 4

CASE STORY

CASE STORY. Is one of the World Wide leader Manufacturer of Bearings. This Customer is served by our Distributor Anjou Pompes Bécot sa.

mavis
Download Presentation

CASE STORY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CASE STORY Is one of the World Wide leader Manufacturer of Bearings. This Customer is served by our Distributor Anjou Pompes Bécot sa The plant from Fontenay-le-Comte manufactures the rigid range of bearings (DGBB) assembled with balls of a diameter of 28 to 52 mm. The Plant exports 80% of his production, 670 000 bearings are shipped every day from the 14 production line, these are delivered to some key acounts such as- Électrique tels Bosch, Leroy Somer, Delphi or Whirlpool.

  2. CASE STORY  Before : Each production line had his dedicated extrusion pump in order to lubricate the bearings, these pumps were situated very close to the operator. A total of 13 packages one per production line were necessary to insure each of the grease job of the bearings.  After : Roger FRAPPREAU (Anjou Pompes Bécot sa) has offered a centralised grease process, Packages dedicated for 200 Kg drums, to feeding a high pressure piping network distributing a regulated amount of grease at each production line. The new system is composed of an Electrical Control Box controlling all the low level alarms for the drums, assures the relay from an empty drum to switch automatically to a filled drum. The pay back for this investment is on decrease of material remained in each of the 13 little drums, savings by optimising the changing drum operation, reduce the number of pumps installed as also contributed on savings for maintenance and parts stocked.

  3. CASE STORY

  4. CASE STORY  Total Investment : For the total Grease process for the 2 lines MT47 et LHT23 : 150 000.00 €  Results : Savings per year due to the amount of grease & time saved : 137 000.00€

More Related