reliability n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
RELIABILITY PowerPoint Presentation
Download Presentation
RELIABILITY

Loading in 2 Seconds...

play fullscreen
1 / 25

RELIABILITY - PowerPoint PPT Presentation


  • 102 Views
  • Uploaded on

RELIABILITY. Marky Kidd Probability and Statistics Presentation EMIS 7370. Reliability. “ The probability that a system or product will perform in a satisfactory manner, without failures, for a given period of time when used under specified operating conditions. ” Conditional probability

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

RELIABILITY


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
    Presentation Transcript
    1. RELIABILITY Marky Kidd Probability and Statistics Presentation EMIS 7370

    2. Reliability “The probability that a system or product will perform in a satisfactory manner, without failures, for a given period of time when used under specified operating conditions.” • Conditional probability • Performance standard • Confidence level • Stress levels • Mission time • Age

    3. Founding Father- Robert Lusser 1899-1969 German Engineer and Aircraft designer 1941Robert Lusser, German V-1 rocket scientist, recognizes need 1953 Formalized his reliability views Which became the Lusser Law

    4. Lusser Law • The reliability of a series system is equal to the product • of the reliability of its component subsystems, if their • failure modes are known to be statistically independent. • Rs = R1 x R2 x . . . x Rn • Since a single path exists, the failure of any element in the system interrupts the path and causes the system to fail

    5. History of Reliability 1941Robert Lusser, German V-1 rocket scientist, recognizes need 1943 Joint Army-Navy vacuum tube development committee 1950DoD establishes ad hoc group on Reliability 1953RCA establishes1st organized Reliability program discipline 1955IEEE initiated the Reliability and Quality Control Society 19561st Reliability text book is published 1957Air Force issues 1st reliability specification 1960US Naval Post Graduate school offers Reliability course 19621st annual R&M conference held 1965Founding of the Society of Reliability Engineers (SRE)

    6. Determine Reliability • In order to determine the reliability of a system: • Broken down into structure trees: • System/End Item • WRA/U – Weapons Repairable Assembly/Unit • SRA/SRU – Shop Repairable Assembly/Unit • ORU – Orbital Repair Unit (Space hardware) • Repair Part • Non-repair part / piece part

    7. Reliability Engineering • The function of analyzing the expected or actual reliability • of a product, process or service, and identifying actions • to reduce failures or mitigate their effect. Engineers • analyzing reliability typically carry out reliability • predictions, design testing, monitor and analyze field • failures, along with suggesting design and manufacturing • changes.

    8. 4 Major Concepts of Reliability • 1. Reliability is the probability that a system • Will demonstrate specified performance • for a stated period of time • 4. When operated under specified conditions

    9. Probability Reliability Major Concepts Given Time Reliability Stated Conditions Performance

    10. Reliability Goals • To reduce repairs • To lower cost • Uphold and maintain the company’s reputation MONEY!!!!

    11. Reliability Function • The reliability function or the survival function is determined from the probability that a product will not fail for a specified amount of time t. No Failures

    12. Reliability Equations • Reliability Function • Density Function f(t), • Failure Rate per Hour

    13. The Bathtub Curve

    14. The Bathtub Curve Continued… • Infant mortality: Decreasing Failure Rate • Higher number of failures due to product variations, manufacturing processes etc. • Useful Life: Low “Constant” Failure Rate • Leveling off due to debugging • Wear-Out Period: Increasing Failure Rate • Failure rate increase due to product age/duration

    15. The Bathtub Curve Cont.

    16. Measures of Reliability • 1.0 (100% Reliable) • to • 0.0 (non-Reliable) e = 2.718281828 (not repeating)

    17. Reliability vs. Non-Reliability • Rn= Reliability Qn= Un-Reliability 1- Qn= Reliability (Success) 1- Rn= Non-Reliability (Failure)

    18. Distributions • Binomial, Exponential, Normal, Poisson, and Weibull are • all different distributions that can be use to determine • failures in systems/products

    19. Weibull Distribution • 1937 Developed by the Swedish professor Dr. Waloddi • Weibull • 1951 Introduced to the public in Dr. Waloddi’s paper “A • Statistical Distribution Function of Wide Applicability,”

    20. Purpose of Weibull Distribution • Model failure characteristics such as: • strength test • infant mortality • random failures • wear-out, • failure-free periods • failure rate predictions • determining cost effectiveness and maintenance periods of reliability-centered maintenance activities.

    21. Weibull continued.. • 2 Parameters: • Shape parameter: Beta(β) (the slope) • The shape parameter is the slope of the function; therefore, different values of the shape parameter can change the way the distribution and reliability of a population may look. • Scale parameter: eta (h) (sometimes n or k) • scale parameter will determine when in time a product or population of products will fail; 63.2% the characteristic life.

    22. Weibull Distribution and Reliability • Weibull distribution can be used to compute the percentiles of the reliability function or rather the • products that didn’t fail (survived) along with the confidence limits for these estimates.

    23. Weibull Distribution continued… • Weibull Distribution changes reliability depending on the • value of the shape parameter: • For β<1, the reliability decreases early in the product’s • life and then slowly from there on. • For β>1, initially the reliability plot shows a small drop, • but sharply at some later point in time.

    24. Weibull Distribution continued…

    25. Summary • Weibull most flexible distribution for determining reliability • Figuring out Expected number of failures is essential • Implementing a Reliability Program is vital to the success of a product/system • Customer satisfaction • Identify risk • Decrease ownership of product Performance over time