1 / 11

RAD 350 Chapt . 25 Fluoroscopy

RAD 350 Chapt . 25 Fluoroscopy. Fluoro’s primary function is to enable one to view the patient in “real time” with dynamic motion Invented by Thomas Edison in 1896

mattox
Download Presentation

RAD 350 Chapt . 25 Fluoroscopy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RAD 350 Chapt. 25 Fluoroscopy • Fluoro’s primary function is to enable one to view the patient in “real time” with dynamic motion • Invented by Thomas Edison in 1896 • Utilized a conventional x-ray unit with a fluorescent screen that would convert the x-rays (remnant beam) to low level light the radiologist could view

  2. Image Intensified Fluoro

  3. II Fluoro • Increased image brightness with II over direct fluoro is the biggest advantage of II • Usually controlled by “automatic brightness control” (ABC that the radiologist can control)

  4. Image Intensifier • Dang it – I couldn’t find a picture, so draw the dang thing! • Input phosphore • Photocathode (photo emission) • Evacuated glass envelope • Electrostatic focusing lens (neg. charge) • Anode • Output phosphor

  5. Image intensifier(I lied – here is the picture)

  6. Gain • Minification gain – ratio of input to output sizes • Flux gain – ratio of # of input PHOTONS to output LIGHT PHOTONS • Brightness gain (total brightness gain)= minification gain X flux gain

  7. Fluoro Magnification • Most fluoro II units have dual input phosphor sizes (9” and 6” {27/17 cm}) • Some have “tri” input (trifield tubes 27/17/12 cm) • The crossover of the electron stream’s distance from the output phosphor determines the amount of magnification • Mag mode = better spatial resolution, better contrast resolution and HIGHER PT. DOSE!!!

  8. TV/Monitor Viewing • Must “couple” the output phosphor to a TV camera tube or CCD/TFT • Vidicon tube is the MOST frequently used tube • Image orthocon and plumbicon are also used

  9. Other viewing/imaging devices • Fiber optics and beam splitters are used to help direct the digitized image to the various destinations (TV monitor, photospot film camera, VCR/DVD recorder, cine camera)

  10. Eyes use rods and cones • Photopic vision – daylight vision uses the CONES • Scotopic Vision - night time vision and uses the RODS

  11. Conventional Fluoro Techniques(not digital fluoro) • Fluoro usually is operated at 5 mA and uses the highest OPTIMUM kVp • Protective Fluoro Measures • Bucky slot cover • Lead curtain • 5 min. back up timer • Lead gloves and aprons (5mm pb) – secondary barriers • Distance

More Related