1 / 15

KLKSK

KLKSK. Pertemuan III Analog & Digital Data Shannon Theorem xDSL. Analog and Digital Signaling of Analog and Digital Data. Analog signals: represents data with continuously varying electromagnetic wave Digital signals: represents data with sequence of voltage pulses. Data and Signals.

masao
Download Presentation

KLKSK

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. KLKSK Pertemuan III Analog & Digital Data Shannon Theorem xDSL

  2. Analog and Digital Signaling of Analog and Digital Data • Analog signals: represents data with continuously varying electromagnetic wave • Digital signals: represents data with sequence of voltage pulses

  3. Data and Signals • Usually use digital signals for digital data and analog signals for analog data • Can use analog signal to carry digital data • Modem • Can use digital signal to carry analog data • Compact Disc audio

  4. Analog & Digital Transmission Data and Signal

  5. Analog Signals Carrying Analog and Digital Data

  6. Digital Signals Carrying Analog and Digital Data

  7. Analog & Digital Transmission Treatment of Signals

  8. Channel Capacity • Data rate • In bits per second • Rate at which data can be communicated • Bandwidth • In cycles per second of Hertz • Constrained by transmitter and medium

  9. Nyquist Bandwidth • If rate of signal transmission is 2B then signal with frequencies no greater than B is sufficient to carry signal rate • Given bandwidth B, highest signal rate is 2B • Given binary signal, data rate supported by B Hz is 2B bps • Can be increased by using M signal levels • C= 2B log2M • M is the of discrete signal or voltage levels

  10. Shannon Capacity Formula • Consider data rate, noise and error rate • Faster data rate shortens each bit so burst of noise affects more bits • At given noise level, high data rate means higher error rate • Signal to noise ratio (in decibels) • SNRdb=10 log10 (signal/noise) • Capacity C=B log2(1+SNR)

  11. Consider a voice channel being used, via modem, to transmit digital data. Assume a bandwidth of 3100 Hz. A typical value of S/N for a voice-grade line is 30 dB; or a ratio of 1000:1 • Thus • C = 3100 log2(1 + 1000) = 30,894 bps

  12. Shannon proved that if the actual information rate on a channel is less than the error-free capacity, then it is theoretically possible to use a suitable signal code to achieve error – free transmission through the channel • Unfortunately Shannon formula does not suggest a means for finding such codes

  13. Eb/No : ratio of signal energy per bit to noise power density per hertz • Consider a signal, digital or analog, that contains binary digital data transmitted at a certain bit rate R • 1 W = 1 J/s • The energy per bit in a signal Eb = STb • S : the signal power • Tb : the time required to send one bit • The data rate R = 1/Tb • (Eb/No) = (S/R)/No = S/(kTR) • Eb/No = S – 10log R + 228.6 dBW – 10 logT

  14. Ex. For binary phase-shift keying, Eb/No = 8.4 dB is required for a bit error rate of 10-4 (probability of error = 10-4). If the effective noise temperature is 290oK (room temperature) and the data rate is 2400 bps, what received signal level is required?

  15. Ans. • 8.4 = S (dBW) – 10 log 2400 + 228.6 dBW – 10 log 290 • = S (dBW) – (10) (3.38) + 228.6 – (10)(2.46) • S = -161.8 dBW

More Related