1 / 30

LECTURE 8.2

LECTURE 8.2. LECTURE OUTLINE. Weekly Reading Lesson 08 Prototype Quiz: Feedback. CHAPTER XXV.

marty
Download Presentation

LECTURE 8.2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LECTURE 8.2

  2. LECTURE OUTLINE • Weekly Reading • Lesson 08 Prototype Quiz: Feedback

  3. CHAPTER XXV • Chapter 25 is concerned with "macroscopic" aspects of the mechanical behavior of materials. The concepts of stress and strain (yes, they are different!) are introduced and it is shown that, when properly defined, stress and strain are properties of a given material and independent of the geometry of that material. The stress-strain curve is introduced, as are the three stages in the deformational behavior of materials: the elastic regime, the plastic regime, and ultimate failure. Examples of stress-strain curves for metals, ceramics, and polymers, are presented, and the differences between the mechanical properties of the three major material types are discussed. • The chapter shows that the mechanical behavior of materials may be almost fully described in terms of • the Young's modulus (a measure of stiffness or rigidity). • the yield strength (the stress at which permanent deformation occurs). • the ultimate Tensile Strength (the stress at which the material breaks). • the ductility (a measure of, for example, the elongation to failure).

  4. CHAPTER XXVI • Chapter 26 discusses the trends observed in the previous chapter in terms of atomic processes. For example, it is shown that Young's modulus, which is a measure of stiffness, is directly related to the bond strength of the materials. The ease with which a thermoplastic polymer deforms plastically is explained in terms of the weak intermolecular bonding, and the ductility of metals is rationalized in terms of the non-directional metallic bond. Chapter 26 also describes a variety of crystalline defects, dislocation in particular. It is argued that dislocation is mainly responsible for the ease with which a metal will plastically deform. The chapter outlines a number of ways for strengthening metallic materials when armed with this information.

  5. CHAPTER XXVII • A composite may be defined as "a multiphase material that exhibits a significant proportion of the properties of both constituent phases." Composites range in complexity from the simple addition of straw to bricks (a process that has been followed since well before Biblical times) to the complex multi-layered structure of many sporting goods. Chapter 27 describes a number of composites, including wood (a polymer-polymer composite), concrete (ceramic-ceramic), and fiberglass (polymer-ceramic). The reader is also introduced to the concept of "performance indices," which seek to rank or rate different materials as candidates for particular applications. The two indices chosen are specific strength (strength divided by density) and specific modulus (modulus divided by density). These performance indices are of some importance when weight savings are crucial—as in sports equipment.

  6. INTERMEDIATE CONSTRAINT

  7. Q1–3. For the following sentences, substitute the correct word/phrase for each bolded item. If you believe that the item is correct as it stands, select “a.” • The intramolecular bonding in solid methane (CH4) is (1) hydrogen. The intermolecular bonding in methane is (2) covalent. Methane is a (3) molecularmaterial. (1) b) van der Waals c) covalent (2) b) van der Waals c) hydrogen (3) b) non-molecular

  8. <F> Obtaining credit for this question requires an understanding of what constitutes a molecular material. Molecular materials are comprised of molecules. Within the molecules, the atoms are bonded covalently to each other (i.e., the intramolecular bond is covalent). However, the molecules only attract each other through much weaker secondary bonds, either van der Waals or hydrogen. This is the intermolecular bond. Almost invariably, the secondary bond is van der Waals, although in water, it is hydrogen. Molecules can be formed when non-metallic atoms bond to each other. Such is the case with methane. Thus, the answers to the above questions are: • The intramolecular bonding in solid methane is (c) covalent. The intermolecular bonding in methane is (b) van der Waals. Methane is a (a) molecular material.

  9. Q4–6. Mark each of the bolded items as either true (a) or false (b). • The element (4)lithium is in the same group as calcium. An atom of lithium has (5)three protons, and for a neutral atom, (6) one outer-shell electron.

  10. <F> For the answers to this question, refer to any of the periodic tables in the book. This will reveal that lithium is in Group I (which implies that it has one outer-shell electron) while calcium is in Group II. Lithium has an atomic number of three and hence three protons in its nucleus. The answers to the above questions are thus: (4) false (5) true (6) true

  11. Sulfur is in Group VI of the periodic table and has (7) ____ outer-shell electrons, or valence electrons. Each S atom can bond to (8)_____ other S atoms to form an eight-membered ring molecule. The bonding between adjacent rings of S atoms is (9) ____. (7) a) two b) eight c) four d) six (8) a) two b) eight c) four d) six a) covalent b) ionic c) metallic d) van der Waals

  12. <F> The answers to this question are to be found in the CRRA essay on Sulfur, or can be answered using a little intuition and reference to a periodic table. Sulfur is in Group VI of the periodic table and has six outer-shell electrons, or valence electrons. Hence, S needs to acquire two extra electrons to complete its outer shell. As a result, each S atom can form single bonds to two other S atoms. This bonding arrangement results normally in a ring of eight S atoms or, in some cases, a linear inorganic polymer molecule. The bonding between the rings of S atoms is van der Waals. The answers to the above questions are thus: (7) six (8) two (9) van der Waals

  13. Q10–12. The Wayward islanders have developed their own version of the periodic table and have their own names for the elements. However, they have adopted the same conventions for the naming of groups and periods as are adopted in the course textbook. One element, ralphinium (R), is known to be in Group III, Period 6. Atoms of ralphinium bond to one another to form a face-centered cubic solid. However, most ralphinium is found in a compound with oozium (Oz), which has six outer-shell electrons and is in Period 2. Oozium is a gas at room temperature. The ralphinium-oozium compound is called pentobalite.

  14. The bonding in the pure ralphinium solid is (10) ______. It is likely that the compound pentobalite has the stoichiometry (11) ____ in which the ralphinium atoms are (12) ____ bonded to the oozium atoms. (10) a) ionic b) covalent c) metallic d) van der Waals e) hydrogen (11) a) ROz3 b) R3Oz2 c) R2Oz d) R2Oz3 e) R3Oz (12) a) ionically b) covalently c) metallically d) van der Waals e) hydrogen

  15. <F> The answers to this question rely on the identification of ralphinium as a metal (it is in Group III, but in Period 6, and metallic behavior increases as the period number increases). The bonding in the pure ralphinium solid is likely to be metallic, a suggestion that is reinforced by the observation that ralphinium is face-centered cubic. Oozium can be identified as a non-metal, as it is in Group VI and Period 2. Hence, it can be concluded that ralphinium will bond ionically to oozium to form the compound pentobalite. Each ralphinium atom will be able to donate its three outer-shell electrons to one or more oozium atoms, whereas each oozium atom only needs two electrons to complete its outer shell. Hence, if two ralphinium atoms donate three electrons each for a total of six donated electrons, then three oozium atoms can complete their outer shells. Thus, it is likely that the compound pentobalite has the stoichiometry R2Oz3. The answers are: (10) metallic (11) R2Oz3 (12) ionically

  16. THE SYMMETRY OF PATTERNS

  17. Q13. Figure 1 is a schematic drawing of a crystalline solid. It is a compound consisting of "A" atoms and "B" atoms. The two-dimensional lattice that best describes the material is a ______. <a> parallelogram <b+> rectangle <c> centered rectangle <d> square <e> hexagon <F> The pattern of Figure 1 is best described by a rectangle.

  18. Q14. Figure 1 is a schematic drawing of a crystalline solid. It is a compound consisting of "A" atoms and "B" atoms. The rotational symmetry associated with, for example, the "B" atoms in Figure 1 is _________. <a> one-fold <b+> two-fold <c> three-fold <d> four-fold <e> six-fold <F> I can take the pattern of Figure 1 and rotate it by 180˚ and 360˚, and each time, the motif repeats itself exactly. Hence the rotational symmetry is two-fold—it repeats twice in one complete rotation or after rotations of 360/n, where n = 2 (see Figure 1).

  19. Q15. Figure 1 is a schematic drawing of a crystalline solid. It is a compound consisting of "A" atoms and "B" atoms. The mirror symmetry associated with any one A atom on Figure 1 is given by the lines on Figure ____. <a+> 2a <b> 2b <c> 2c <d> 2d <e> 2e <F> Figure 2a is the correct answer . HINT #1: The mirror symmetry must "reflect" one half of the crystal (assumed infinite) into the other half through the mirror line.

  20. Q16. Figure 1 is a schematic drawing of a crystalline solid. It is a compound consisting of "A" atoms and "B" atoms. It is known that atom (A) is from Group II of the periodic table. Atom B will be from group____. <a> VII <b> V <c> VIII <d> IV <e+> VI <F> The compound has the stoichiometry of AB, because both atomic species have four nearest neighbors. Hence, atom "B" must be from Group VI.

  21. Q17. Figure 1 is a schematic drawing of a crystalline solid. It is a compound consisting of "A" atoms and "B" atoms. The bonding in the material shown in Figure 1 is _______. <a> metallic <b+> ionic <c> covalent <d> covalent plus van der Waals <F> The elements that constitute this material are from Groups II and Group VI and are thus metal and non-metal, respectively. Hence, the bonding in the material is ionic.

  22. Q18. Figure 1 is a schematic drawing of a crystalline solid. It is a compound consisting of "A" atoms and "B" atoms. Figure U8-F1 is a schematic drawing of a ______. <a+> ceramic <b> metal <c> polymer <F> Ceramic is the correct answer. The bonding in the compound is ionic, which automatically excludes metals, because they are metallically bonded, and polymers, for which the intramolecular bonding is covalent.

  23. Q19. Figure 1 is a schematic drawing of a crystalline solid. It is a compound consisting of "A" atoms and "B" atoms. The material shown in Figure U8-F1 displays _________. <a> short-range order (SRO) <b> long-range order (LRO) <c> orientational order <d> short-range order (SRO) + long-range order (LRO) <e+> short-range order (SRO) + long-range order (LRO) + orientational order <F> The material contains SRO, which states that the monomer is "ordered" (Chapter 22). The crystalline nature of the material also implies both LRO (Chapters 22 and 23) and orientational order (Materials' Essay 23B).

  24. Q23. Strontium chloride (SrCl2) is a(n) _______. <a> atomic solid <b> molecular solid <c> hydrogen-bonded solid <d> covalent network solid <e+> ionic solid <F> Strontium is in Group II (hence a metal) and chlorine is in Group VII (hence a non-metal). According to the definition given in the Epilogue (see Epilogue, Table 3), SrCl2 is an ionic solid and hence, a ceramic.

  25. Q24. Strontium chloride (SrCl2) is a(n) ______. <a> noble gas <b+> ceramic <c> metal <d> polymer <F> Strontium is in Group II (hence a metal) and chlorine is in Group VII (hence a non-metal). According to the definition given in the Epilogue (and see Epilogue, Table 3), SrCl2 is an ionic solid and hence, a ceramic.

  26. Q25. Solid carbon dioxide (CO2) is a(n) ________. <a> atomic solid <b+> molecular solid <c> hydrogen-bonded solid <d> covalent network solid <e> ionic solid <F> Carbon dioxide is molecular. It consists of a single carbon atom covalently bonded to two oxygen atoms. At “low” temperatures, the material may form a molecular solid.

  27. Q26. Solid carbon dioxide (CO2) is a _____. <a> noble gas <b+> ceramic <c> metal <d> polymer <F> Carbon dioxide is non-metallic and inorganic, hence, it is a ceramic.

  28. Q27. Diamond-carbon is a(n) __________. <a> atomic solid <b> molecular solid <c> hydrogen-bonded solid <d+> covalent network solid <e> ionic solid <F> The bonding in diamond-carbon is covalent, but the tetrahedral bonding creates a network solid.

More Related