1 / 3

How Do I Setup HP Deskjet 3630

Install the drivers for the hp 123 com setup dj3630. Place the hp 3630 installation CD in the CD drive of your computer. The installation process begins automatically. To begin installing the DeskJet drivers, follow the on-screen instructions. Connect the supplied USB cable to the back of the printer and the opposite end of the USB cable to your computer's USB port when the printer's software prompts you to connect the printer. Allow the printer to be detected and connected by the computer. If you don't have the installation CD, detach the printer's USB cable and then go to 123.hp.com/setup 3

martin18
Download Presentation

How Do I Setup HP Deskjet 3630

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How Do I Setup HP Deskjet 3630hp 123 com setup dj3630 printer needs a proper setup before it can execute printing. The HP printer can be connected to your computer in a variety of ways. You can choose between a wired USB connection and a wireless USB connection. However, before you can connect your printer to your computer, you must first install the HP 3630 printer driver and software. As you can see, setting up a printer is a lot of work, which is why we've put together this guide with step-by-step directions for the hp 123 com setup dj3630. Simply follow the steps in the order listed, and your printer will be correctly configured, connected, and ready to print by the time you reach the conclusion of this page.

  2. Initial setup for hp 123 com setup dj3630Remove the HP 3630 printer from the box and discard the safety tape. Make sure the HP printer is close to the PC and on a flat surface.Connect one end of the power cable to the power supply and the other end to the rear of the HP Deskjet 3630 printer.Press the power button to turn on the printer. Continue with the installation after the power button stops flickering and is stable.Don't worry, the printer will make some noise. It's the printer's hardware that needs to be adjusted and set up.It's now time to arrange the ink cartridges in their proper locations.Remove the ink cartridges from the box that came with the printer. Remove the tape off the back of the ink cartridges as well as the contact point with care.When you open the cabinet of the HP all-in-one 3630, the cartridge holder moves to the center of the machine for cartridge installation.Place the ink cartridges in the corresponding slots and firmly press them in.Close the printer cover after the ink cartridge is in position.The newly installed ink cartridges will be detected by the printer.For a brief moment, the power button may flash. Before continue, wait for it to cease flashing.

More Related