1 / 111

SL500 Modular Library System

SL500 Modular Library System. Objectives. Locate needed information. Define the safety and ESD requirements. Identify and locate major components. Unpack , install & configure the library. De-install the Library. Configure switches, bridges and hubs.

marge
Download Presentation

SL500 Modular Library System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SL500 Modular Library System

  2. Objectives Locate needed information. Define the safety and ESD requirements. Identify and locate major components. Unpack , install & configure the library. De-install the Library. Configure switches, bridges and hubs. Label and route cables drives to other equipment. Verify and /or install library firmware.

  3. Objectives • Setup and operating performance. • Diagram and document the installation. • Update the site logs to reflect the customer’s subsystem configuration.

  4. Prerequisites • SL500 Principles of Operation • SAN Concepts and Connectivity. • L-Series Library course. • LTO Ultrium course. • SDLT course.

  5. Personal Safety • Safety Precautions • Lifting Techniques • Shoulder, Elbow, Wrist, and Hand Safety • Fiber -optic Safety • Rack Safety

  6. Product Precautions • Electrostatic Discharge (ESD) Damage Prevention • ESD Precautions • ESD Protection Procedure • Prepare the work Area • Access the Equipment • Replace components • Cleanup • Fiber – optic Cable Installation • Cable routing • Cable Management • Connector protection

  7. Planning the Installation • General Information • Prepare the Installation location • Knowledge in SCSI principles • Knowledge in Fibre channel principles • Configuration Diagram

  8. SL500 Tape Library Types • Library with LTO Cartridge Slots • Library with Mixed-Media Cartridge Slots

  9. Library with LTO Cartridge Slots • The Base module contains • 50 cartridge slots • One or two tape drives • 5 – slot cartridge access port(CAP)

  10. Library with LTO Cartridge Slots base module

  11. LTO Slot Physical Configurations Slot Numbering scheme Four Integers Library number Library module number Library row number Library column number

  12. Library with Mixed - Media Cartridge Slots

  13. Library and Rack Dimensions

  14. Library and Rack Dimensions

  15. Library Components Weights

  16. Library Environment Specifications

  17. Power for Library Without Tape Drives

  18. Power for Base Unit and Two LTO Tape Drives

  19. Installing EZ Hardware Compatibility Issues

  20. Installation Steps Unpacking Inspection Preparation of Rack Install Base Unit Install Robotics Unit Install Façade Install an Expansion Module Install the Drive Tray Assemblies Install the Power Cables Install the Library SCSI or Fiber Channel Cables Inserting Cartridges Locking the Front Door and Powering-on the Library

  21. Base Module Accessory Kit

  22. Expansion Module Accessory Kit

  23. SCSI Cabling

  24. Fiber Channel Cabling

  25. Inserting Cartridges

  26. Powering - on the Library

  27. Recording the ConfigurationLibrary Configuration Information

  28. Recording the ConfigurationTape Drive Configuration Information

  29. Security & Password

More Related