1 / 84

BIRD NOTES

BIRD NOTES. EXTERNAL STRUCTURE AND MOVEMENT. The covering of feathers on a bird is called the plumage . Feathers have 2 primary functions that are essential for flight . They form the flight surfaces that provide lift and aid in steering . They prevent excessive heat loss.

manju
Download Presentation

BIRD NOTES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. BIRD NOTES

  2. EXTERNAL STRUCTURE AND MOVEMENT • The covering of feathers on a bird is called the plumage. • Feathers have 2 primary functions that are essential for flight. • They form the flight surfaces that provide lift and aid in steering. • They prevent excessive heat loss.

  3. EXTERNAL STRUCTURE • Feathers are also important in courtship, incubation, and water proofing. • As feathers mature, their blood supply is cut off, and the feathers become dead.

  4. EXTERNAL STRUCTURE • The most obvious feathers are contour feathers, which cover the body, wings, and tail. • These feathers consist of a vane and a supportive shaft. • Feather barbs branch off the shaft, and barbules branch off the barbs. • Barbules of adjacent barbs overlap one another. • The ends of barbules lock together with hamuli, which are like little hooks. • Interlocking barbs keep contour feathers firm and smooth.

  5. EXTERNAL STRUCTURE • Other types of feathers include down feathers, which act as insulation, and filoplume feathers, which have sensory functions.

  6. EXTERNAL STRUCTURE • Birds keep a clean plumage to rid the feathers and skin of parasites. • Preening, which is done by rubbing the bill over the feathers, keeps the feathers smooth, clean, and in place.

  7. EXTERNAL STRUCTURE • Secretions from an oil gland at the base of the tail of many birds are spread over the feathers during preening to keep the plumage water repellant. • Secretions also lubricate the bill and legs to prevent chafing. • Anting is a behavior common to many songbirds and involves picking up ants in the bill and rubbing them over the feathers. • The formic acid that ants secrete is toxic to feather mites.

  8. EXTERNAL STRUCTURE • Feather pigments deposited during feather formation produce most colors in a bird’s plumage. • Color patterns are involved in cryptic coloration, species and sex recognition, and sexual attraction.

  9. EXTERNAL STRUCTURE • All birds periodically shed and replace their feathers in a process called molting. • A typical molting pattern for songbirds begins after hatching when the chick is covered with down. • Juvenile feathers replace the down at the juvenile molt. • A postjuvenile molt in the fall result in plumage similar to that of an adult. • Once sexual maturity is reached, a prenuptial molt occurs late in winter or early spring, prior to the mating season. • A postnuptial molt usually occurs between July and October.

  10. EXTERNAL STRUCTURE • Flight feathers are often lost in a certain order so that birds are not completely deprived of flight during molt periods. • Many birds, however, such as ducks, coots, and rails cannot fly during molt periods and will hide in thick marsh grasses.

  11. The Skeleton • The bones of most birds are lightweight but very strong. • Some bones, like the humerus (forearm), have large air spaces and internal strutting (reinforcing bony bars), which helps increase strength. • Birds also have a reduced number of skull bones, and a lighter structure, the bill, which replaces the teeth. • Some aquatic birds, like the loon, have dense bones, which helps reduce buoyancy during diving.

  12. The Skeleton • The appendages involved in flight cannot manipulate nesting materials or feed young. • The bill and very flexible neck and feet make these activities possible. • The cervical vertebrae have a saddle-shaped surface that allows great freedom of movement. • This flexibility allows the bill and neck to function as a 5thappendage.

  13. The Skeleton • The pelvic girdle, vertebral column, and ribs are strengthened for flight. • Most ribs overlap the next rib to help strengthen the rib cage. • Fusion of the thoracic, lumbar, and sacral vertebrae helps maintain the proper flight posture, and supports the hind appendages during landing, hopping, and walking.

  14. The Skeleton • The posterior caudal vertebrae are fused into a pygostyle, which helps support the tail feathers that are important in steering.

  15. The Skeleton • The sternum of most birds is very large for the attachment of flight muscles.

  16. The Skeleton • The appendages of most birds have also been modified. • Some bones of the front appendages have been lost or fused, and are points of attachment for flight feathers. • The rear appendages are used for hopping, walking, running, and perching.

  17. The Skeleton • Perching tendons run from the toes across the back of the ankle joint to muscles of the lower leg. • When the ankle joint is flexed, as in landing on a perch, these tendons contract and the foot grips the perch. • This automatic grasp helps a bird perch even while sleeping.

  18. Muscles • The largest, strongest muscles of most birds are the flight muscles. • Muscles of most birds are adapted physiologically for flight. • These muscles must be able to contract quickly and fatigue slowly. • They also have many mitochondria and produce large amounts of ATP to provide energy needed for flight, especially long-distance migrations.

  19. Muscles • Domestic fowl have been selectively bred for massive amounts of muscle (white meat). • This is good for food, but poorly adapted for flight because it doesn’t have enough mitochondria for energy.

  20. Flight • The wings of birds are adapted for different kinds of flight. • Bird wings form an airfoil, which is a surface that provides lift.

  21. Flight • Air passing over the wing travels farther and faster than air passing under the wing, decreasing air pressure on the upper surface of the wing and creating lift.

  22. Flight • The lift must overcome the bird’s weight, and the forces that propel the bird forward must overcome the drag that the bird moving through the air creates. • Increasing the angle that the leading edge of the wing makes with the oncoming air (angle of attack) increases lift. • As the angle of attack increases, the flow of air over the upper surface becomes turbulent, reducing lift. • Turbulence is reduced if air can flow rapidly through slots at the leading edge of the wing. • Slotting the feathers at the wing tips and the presence of an alula (groups of small feathers that bones of the wing support) help reduce turbulence.

  23. Flight • The tail of a bird helps with many things such as steering and braking during flight. • During horizontal flight, spreading the tail feathers increase lift at the rear of the bird and causes the head to dip for descent. • Tilting the tail sideways turns the bird.

  24. Flight • When a bird lands, its tail deflects downward, serving as an air brake. • In the males of some species, like sunbirds and widow birds, tails have dramatic ornamentation that attracts females and improves reproductive success.

  25. Flight • Different birds have different kinds of flight. • During gliding flight, the wing is stationary, and a bird loses altitude. • Waterfowl come in for a landing using gliding flight.

  26. Flight • Flapping flight generates the power for flight and is the most common type of flying. • Soaring flight allows some birds to remain airborne without using too much energy. • Ocean soarers, such as albatrosses and frigate birds, have long, narrow wings that provide maximum lift at high speeds.

  27. Flight • Hummingbirds perform hovering flight. • They hover in air by fanning their wings back and forth 50-80 beats per second. • The wings move in a figure 8 pattern.

  28. NUTRITION AND DIGESTIVE SYSTEM • Most birds have huge appetites!! • This appetite supports a high metabolism that makes endothermy and flight possible. • Bird bills and tongues are modified for many different feeding habits and food sources. • For example, a woodpecker tongue is barbed for getting grubs from tree bark. • Sapsuckers make holes in trees and use a brushlike tongue for licking the sap that builds up in these holes.

  29. NUTRITION AND DIGESTIVE SYSTEM • The tongues of hummingbirds and other nectar feeders roll into a tube for getting nectar from flowers.

  30. NUTRITION AND DIGESTIVE SYSTEM • Birds’ bills are used for feeding, preening, nest building, courtship, and defense. • Modifications of the bill reflect specific functions. • The bill of an eagle is modified for tearing prey, the bill of a cardinal is specialized for cracking seeds, and the bill of a flamingo is used to strain food from the water.

  31. NUTRITION AND DIGESTIVE SYSTEM • In many birds, the crop is a storage structure that allows birds to quickly ingest large quantities of locally abundant food. • They can then seek safety while digesting their food.

  32. NUTRTION AND DIGESTIVE SYSTEM • The crop of pigeons produces “pigeon’s milk”, a cheesy secretion that young pigeons (squabs) feed on until they can eat grain. • Crops are less developed in insect eating birds because they typically eat all day long.

More Related