1 / 22

PA-AWRA Conference October 22, 2004

Modeling to Support Development of TMDLs for PCBs in the Delaware Estuary. PA-AWRA Conference October 22, 2004. Key Themes. All TMDLs are not created equal. Models are essential for complex pollutants in water bodies with multiple point and non-point sources.

luisa
Download Presentation

PA-AWRA Conference October 22, 2004

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Modeling to Support Development of TMDLs for PCBsin the Delaware Estuary PA-AWRA ConferenceOctober 22, 2004

  2. Key Themes • All TMDLs are not created equal. • Models are essential for complex pollutants in water bodies with multiple point and non-point sources. • They allow a better understanding of the sources, processes, and interactions influencing pollutant transport and fate. • Facilitate decisions on the relative importance of source categories and reduction strategies. • TMDLs for complex pollutants like PCBs should be developed in stages.

  3. Factors Contributing to the Complexity of PCB TMDLs • PCBs are a class of chemicals. • Human health criteria must be updated. • PCBs are hydrophobic with significant interaction with sediments. • Sources of PCBs include contaminated sites, NPDES discharges, CSOs, air deposition, tributaries, non-point source runoff, ocean and C&D Canal and sediments. • The Delaware Estuary is a complex water body with significant tidal influence.

  4. Zone Designations for the Delaware Estuary

  5. PCBs • Man-made organic chemicals with a biphenyl base structure and 209 possible chlorine substitution patterns. • Terminology: Aroclors, congeners, homologs. • Properties: Hydrophobic, tend to accumulate in sediments and tissues.

  6. Modeling Objectives • Gain understanding: • Determine PCB load-response relationships. • Determine principal controlling processes. • Address management questions: • Determine PCB TMDL for each zone. • Allocate TMDLs among sources. • Assess the impact of load reduction strategies.

  7. Challenges for this Effort • Complexity of system • Tidal • Multiple PCB source categories - including 142 individual NPDES discharges. • Limited available data • Loadings • Ambient concentrations • Ambitious schedule • Court mandates • Administrative agreements

  8. Principal Mass Loadings and Fluxes

  9. Delaware River PCB Model (DELPCB) • Modified version of DYNHYD5/TOXI5 • EPA-supported and widely used for toxic chemical TMDLs and contaminated sediments. • Model formulations/code extensively tested and assessed with observations at numerous sites. • Builds upon modeling work at other sites: • Kalamazoo River RI/FS • New York Harbor CARP Model • Green Bay Mass Balance Study • Upper Hudson River RI/FS • Fox River RI/FS

  10. Delaware River PCB Model (DELPCB) • Represents water column and sediments • One-dimensional in longitudinal • 87 spatial segments • Time-variable • Hydrodynamics • Tidal heights • Chloride mass balance • Organic carbon sorbent dynamics • Particulate carbon (biotic and detrital) • Dissolved organic carbon • Penta-PCB homolog

  11. Calibration Approach • Short-term Calibration • Running Calibration Approach - 19 months (September 2001 to March 2003) • Emphasis on water column concentrations • Suite of different model calibration metrics • Decadal-scale consistency check • 74 years (1930 to 2003) • Emphasis on surficial sediments and dated cores • Significant uncertainty in the historical loading trend.

  12. Spatial Plot: Relative Impact of the Boundary Conditions:Median Values:BC = 100mg/l for Mouth of the Bay, C&D, Schuylkill, and/or Trenton

  13. Penta-PCB Load by Source CategorySeptember 1, 2001 through March 31, 2003

  14. Total and Dissolved Penta PCBs (Upper and Middle Estuary)

  15. Decadal Scale Simulationfor penta-PCB in Water Column

  16. Atmospheric gas phase PCB concentrations

  17. Summary of Approachfor Stage 1 TMDLs • Utilize both a conservative chemical (chloride) and the penta-PCB models that cycle inputs from the period February 1, 2002 to January 31, 2003. • Calculate annual median TMDL loadings to be consistent with both the model simulations and the 70 year exposure for human health criteria. • Extrapolate penta-PCB results to Total PCBs.

  18. Ratio of Penta-PCBs toTotal PCBs in Ambient Samples

  19. Key Findings • The principal sources of PCB loadings are contaminated sites, non-point sources and point sources. • The atmosphere is currently a sink for PCBs, but will be a significant PCB source as criteria are approached. • PCB loadings at head of tide (Trenton) have a significant influence in the Delaware Estuary. • Water column PCBs are influenced by ongoing watershed sources and legacy contamination in the sediments.

  20. Summary points • Model for PCBs is developed, calibrated and is scientifically credible. • Model was used to develop Stage 1 PCB TMDL, but Stage 2 is necessary to address uncertainties. • TMDLs will be based upon the most stringent water quality criteria: revised human health or wildlife criteria. • TMDLs will be established by summing the 10 PCB homologs. • The TMDLs will be developed using homolog- specific PCB water quality models. • Model can be extended to other contaminantsand to other watersheds.

  21. Contact Information Thomas J. Fikslin Head, Modeling & Monitoring Branch Delaware River Basin Commission West Trenton, NJ 08628 609-883-9500, x253 Thomas.Fikslin@drbc.state.nj.us Reference Reports: www.drbc.net

More Related