slide1 n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
Fastedd @ Helpful Notes 2005 PowerPoint Presentation
Download Presentation
Fastedd @ Helpful Notes 2005

Loading in 2 Seconds...

play fullscreen
1 / 56

Fastedd @ Helpful Notes 2005 - PowerPoint PPT Presentation


  • 51 Views
  • Uploaded on

Advanced Techniques using AutoDESK Inventor. Tutorial 1 : Game Pad. Fastedd @ Helpful Notes 2005. Select the Origin folder from the Browser. Right Click on the XY Plane . Select Visibility from the menu. Select the XY Plane.

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'Fastedd @ Helpful Notes 2005' - lucky


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
slide1

Advanced Techniques using AutoDESK Inventor

Tutorial 1 : Game Pad

Fastedd @ Helpful Notes 2005

slide2

Select the Origin folder from the Browser.

Right Click on the XY Plane.

Select Visibility from the menu.

slide3

Select the XY Plane.

Select Rotate and press the space bar to display the square. Select the arrow as shown.

slide4

Select Work Plane. Select the XY Plane and drag the new Work Plane as shown. Alter the size to -80.

Do the same again. Drag the new Work Plane in the opposite direction. Alter the size to 80.

slide5

Select the two new Work Planes one at a time. Right clicking and selecting turn off the Visibility.

You should be left with the visible XY Plane.

slide6

Select the Look At icon to set the XY Plane as shown.

Select 2D Sketch and select the XY Plane to start a new Sketch.

Select the Point, Hole Centre Icon and select four points as shown.

Make sure that you place one at the 0,0.

Select the Fix Constraint and select the 0,0 position.

Right click and select Done or Esc.

slide7

Edit the dimensions as shown above.

Select Spline and pick the three points. Note that you require to pick the last point twice to terminate the command.

Select Rotate and press the space bar select the corner pointer as shown.

slide10

As before start a New Sketch on this plane.

Place 4 points. Make sure you place one at 0,0.

Use the Fix constraint on the 0,0 point

Edit the Dimensions as shown.

Apply a spline to the points.

slide11

Work Plane 2

Turn on the Visibility of Work Plane 2.

Start a New Sketch on the plane

slide12

Select Project Geometry and select the Curve on Work Plane 1.

Notice a copy will be projected onto Work Plane 2.

slide13

Turn on the Visibility of XY Plane.

You should see a view similar to this.

Select Loft from Part Features

slide14

Click on select a sketch

Select the Curves one at a time.

Notice the direction arrow.

Then Select OK.

Pick this one first.

slide15

Turn off the Visibility of the XY Plane.

Hopefully your Loft looks like this.

slide17

Turn off the Visibility of the LoftSrf1

This should be your XZ Plane

Start a New Sketch on this plane.

slide18

Draw the above sketch on the New Sketch plane. You will need to use the fix constraint @ the 0,0 position. This will keep the part centred.

Try

Finish the sketch.

slide19

Rotate the view over as shown.

Select Extrude Set extents To Next and select the Loft. Make sure the Profile of the Game pad is selected.

slide21

Select Thicken /Offsett.

Select the Loft set the Distance to 5mm.

Make sure the new surfaces direction is upwards.

Check that the you have set the dialogue box up the same way as shown and select OK.

slide22

Turn on the Visibility of the Sketch containing the Dimensions.

Start a New Sketch on the Same plane.

slide23

Rotate the View over to see the dimensions.

Select the Project Geometry icon.

Select the three circles to be

Projected onto the New Sketch Plane.

Finish the Sketch.

slide24

Select Extrude.

Make sure the three circles are chosen for the Profiles.

Set The Extents To Next and select the Offsett as the Terminator.

Make sure your dialogue box looks like this.

Then Select OK.

slide26

Turn off the Visibility of the Sketch containing the dimensions and the Thicken/Offset plane.

slide31

Lets add a window to the model.

Select Rectangle and draw the shape in the position shown to the given dimensions. You will need to Fix the centre or it may be out of position.

Finish the Sketch

slide32

Rotate your view as shown.

Make the XZ PlaneVisible if off.

Select Work Plane and create a new work plane with Offsett distance of 30mm.

New Work Plane

slide34

Select Extrude.

Select the rectangle as the Profile to extrude.

Set Extents to From To and select the two new Work Planes. Lower plane first.

Make sure you select Cut. Then select OK.

slide40

On your own make the sketch Visible that shows the rectangle.

Project the rectangle onto the New Sketch.

Finish the Sketch.

slide43

Note we cannot see through the window as the object is a monolithic model, even if its glass.

(something that is the same in all its parts)

slide44

Turn on the Visibility of the Loft.

Select Thicken/ Offsett .

Set Distance 2mm .

Make sure the direction is down.

slide45

Rotate the part over.

Draw a Hexagon 38 A/C and a circle 20 Diameter at the centre of it.

Draw lines from corner to corner.

Trim as shown

slide46

Select Extrude.

Select the Profile of the shape shown.

Set to Cut.

Set Extents to From To.

Select the two Planes.

slide47

Offsett the XZ workplane 50mm as shown.

Start a new sketch on the new workplane.

Draw a line through the centre.

slide48

Select Revolve.

For the Profile select One Half of the circle.

Select the line through the middle for the Axis.

Select OK.

Look no hands

slide49

Create a new sketch on the XY plane.

Project the sketch of the Ball to your new sketch plane .

Draw a new circle diameter 20

slide50

Extrude the circle and FOR Extents select To.

Select the Sphere you may have to rotate your drawing.

slide53

Start a New Sketch on the New Work Plane.

Turn on the visibility of the sketch containing the circles and Project them to your New Work Plane.

Make sure you draw a line through the centre of the circle.

slide54

Finish sketch and select Revolve.

Select one half of the circle for the Profile.

Select the Line through the centre for the Axis.

Select Extents to Full.

Select OK.

slide56

The End

Fastedd @ Helpful Notes 2005