1 / 4

Maida Development - Recommended Lighting Industry Products

Maida offers a range of surge protection products for the lighting industry, including varistors for various applications. Our products are tested and compliant with safety agency requirements. Contact us for sourcing, stocking, and supply chain solutions.

lucilles
Download Presentation

Maida Development - Recommended Lighting Industry Products

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MAIDA DEVELOPMENT COMPANYRecommended Products for the Lighting Industrywww.maida.comsales@maida.com (757) 723-0785

  2. INTRODUCTION • For the protection of the products listed, Maida typically provides the following product lines: • Standard Series • HC Series • MLV Series • MPD Series • The Lighting Industry is diverse. The surge protection requirements vary depending on the application and the desired market, i.e. residential vs. commercial. Also, the safety agency (UL, ANSI, CSA, etc) testing requirements differ depending on the installation. • Typical protection applications include: • Photo Controls • LED Drivers • LED Arrays • Fluorescent Ballasts • Halogen Fixtures • Traffic Lights

  3. Common Testing Required for Lighting Products • Ceramic Powder Formulations – capacitors and varistors • Customization – component configurations to meet customer requirements • Engineering • Ongoing research and development • Customer design assistance • State of the art test facilities • Understanding safety agency requirements • UL “CTDP” approved • UL “Standards Technical Panel” member • Sourcing, Stocking, and Supply Chain Solutions to meet customer delivery requirements

  4. Maida Products – Recommended Lighting Applications STANDARD SERIES VARISTORS UL1449, cUL, CSA, VDE approvals, RoHS/REACH Compliant, the Standard Series is our broadest and most comprehensive line of radial-leaded varistors. Available in sizes from 5mm to 25mm, and MCOV from 11VAC to 1000VAC (additional voltages available upon request). Designed to handle low and medium voltage. The Standard Series is recommended for use in the ANSI “Typical “, and possibly “Enhanced” test level/configuration. Can be used in the “Extreme” with proper parallel MOV configuration. Also, very commonly used in fluorescent ballast’s. Also used for supplementary protection in LED Drivers. HC SERIES VARISTORS UL1449, cUL approvals, RoHS/REACH Compliant, the HC Series is designed for pulse repetition and/or higher surge current environments. Typical uses are LED lighting, photo controls, GFCI / AFCI / LCDI applications. Available in sizes from 8mm to 25mm, and MCOV from 130VAC to 550VAC. The HC Series is recommended for use in all ANSI test level / configurations. The HC Series has widespread use in the Photo Control industry, primary LED Driver protection, and SPD modules for total lighting protection. MLV SERIES VARISTORS RoHS/REACH Compliant, the MLV Series is a surface mount, multilayer MOV. Designed to provide transient, and ESD protection in EIA 0402, 0603, 0805, 1210, 1812, 2220 chip sizes, and MCOV from 4VAC to 300VAC (additional voltages available upon request). The MLV Series is commonly used for LED Array protection. These are typically installed on the LED array itself. MPD SERIES UL1449 Type 4CA, cUL, a modular surge protective device, featuring an IP65 enclosure, utilizing thermal protection with MOV’s to provide a complete protection package. Can be connected in series or parallel with the load, operational indictor, and MCOV of 120VAC, 277VAC, 347VAC and 480VAC. Nominal Discharge Current (IN) rating of 5kA or 10kA and an IMAX of 10kA or 20kA. Used heavily in the lighting industry for LED street lighting, roadway lighting, parking/garage lighting, and digital signs. The MPD Series is recommended for total lighting protection. This product is designed to protect all modes, while safely disconnecting itself from the circuit in case of sustained overvoltage conditions, or surge conditions exceeding recommended levels. Can be used in series or parallel with the load allowing the customer versatility.

More Related