1 / 22

Physics 207, Lecture 19, Nov. 5

Physics 207, Lecture 19, Nov. 5. Goals:. Chapter 14 Understand and use energy conservation in oscillatory systems. Understand the basic ideas of damping and resonance. Chapter 15 U nderstand pressure in liquids and gases Use Archimedes’ principle to understand buoyancy

loring
Download Presentation

Physics 207, Lecture 19, Nov. 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Physics 207, Lecture 19, Nov. 5 Goals: • Chapter 14 • Understand and use energy conservation in oscillatory systems. • Understand the basic ideas of damping and resonance. • Chapter 15 • Understand pressure in liquids and gases • Use Archimedes’ principle to understand buoyancy • Understand the equation of continuity • Use an ideal-fluid model to study fluid flow. • Investigate the elastic deformation of solids and liquids • Assignment • HW8, Due Wednesday, Nov. 12th • Monday: Read all of Chapter 15 .

  2. SHM So Far • The most general solution isx(t) = A cos(t + ) where A = amplitude  = (angular) frequency = 2pf = 2p/T  = phase constant • For SHM without friction, • The frequency does notdepend on the amplitude ! • This is true of all simple harmonic motion! • The oscillation occurs around the equilibrium point where the force is zero! • Energy is a constant, it transfers between potential and kinetic Velocity: v(t) = -A sin(t + ) Acceleration: a(t) = -2A cos(t + ) Simple Pendulum:

  3. The shaker cart • You stand inside a small cart attached to a heavy-duty spring, the spring is compressed and released, and you shake back and forth, attempting to maintain your balance. Note that there is also a sandbag in the cart with you. • At the instant you pass through the equilibrium position of the spring, you drop the sandbag out of the cart onto the ground. • What effect does jettisoning the sandbag at the equilibrium position have on the amplitude of your oscillation? A. It increases the amplitude. B. It decreases the amplitude. C. It has no effect on the amplitude. Hint: At equilibrium, both the cart and the bag are moving at their maximum speed. By dropping the bag at this point, energy (specifically the kinetic energy of the bag) is lost from the spring-cart system. Thus, both the elastic potential energy at maximum displacement and the kinetic energy at equilibrium must decrease

  4. The shaker cart • Instead of dropping the sandbag as you pass through equilibrium, you decide to drop the sandbag when the cart is at its maximum distance from equilibrium. • What effect does jettisoning the sandbag at the cart’s maximum distance from equilibrium have on the amplitude of your oscillation? A. It increases the amplitude. B. It decreases the amplitude. C. It has no effect on the amplitude. • Hint: Dropping the bag at maximum distance from equilibrium, both the cart and the bag are at rest. By dropping the bag at this point, no energy is lost from the spring-cart system. Therefore, both the elastic potential energy at maximum displacement and the kinetic energy at equilibrium must remain constant.

  5. The shaker cart • What effect does jettisoning the sandbag at the cart’s maximum distance from equilibrium have on the maximum speed of the cart? A. It increases the maximum speed. B. It decreases the maximum speed. C. It has no effect on the maximum speed. Hint: Dropping the bag at maximum distance from equilibrium, both the cart and the bag are at rest. By dropping the bag at this point, no energy is lost from the spring-cart system. Therefore, both the elastic potential energy at maximum displacement and the kinetic energy at equilibrium must remain constant.

  6. y(t) (a) (c) t (b) Exercise Simple Harmonic Motion • A mass oscillates up & down on a spring. It’s position as a function of time is shown below. At which of the points shown does the mass have positive velocity and negative acceleration ? Remember: velocity is slope and acceleration is the curvature y(t) = A cos( t + ) v(t) = -A  sin( t + ) a(t) = -A 2 cos( t + )

  7. k m x Example • A mass m = 2 kg on a spring oscillates with amplitude A = 10cm. At t = 0its speed is at a maximum, and is v=+2 m/s • What is the angular frequency of oscillation  ? • What is the spring constant k ? General relationships E = K + U = constant, w = (k/m)½ So at maximum speed U=0 and ½ mv2 = E = ½ kA2 thus k = mv2/A2= 2 x (2) 2/(0.1)2 = 800 N/m, w = 20 rad / sec

  8. T1 T2 Exercise Simple Harmonic Motion • You aresitting on a swing. A friend gives you a small push and you start swinging back & forth with period T1. • Suppose you were standing on the swing rather than sitting. When given a small push you start swinging back & forth with period T2. Which of the following is true recalling that w = (g / L)½ (A)T1 = T2 (B)T1 > T2 (C) T1 < T2

  9. U K E U x -A 0 A Energy in SHM • For both the spring and the pendulum, we can derive the SHM solution using energy conservation. • The total energy (K + U) of a system undergoing SMH will always be constant! • This is not surprising since there are only conservative forces present, hence energy is conserved.

  10. U K E U x -A 0 A SHM and quadratic potentials • SHM will occur whenever the potential is quadratic. • For small oscillations this will be true: • For example, the potential betweenH atoms in an H2 molecule lookssomething like this: U x

  11. U x SHM and quadratic potentials • Curvature reflects the spring constant or modulus (i.e., stress vs. strain or force vs. displacement) Measuring modular proteins with an AFM See: http://hansmalab.physics.ucsb.edu

  12. What about Friction?A velocity dependent drag force We can guess at a new solution. and now w02 ≡k / m Look With,

  13. What about Friction? if What does this function look like?

  14. Variations in the damping Small damping time constant (b/2m) Low friction coefficient, b << 2m Moderate damping time constant (b/2m) Moderate friction coefficient (b < 2m)

  15. Damped Simple Harmonic Motion • A downward shift in the angular frequency • There are three mathematically distinct regimes underdamped overdamped critically damped

  16. Physical properties of a globular protein (mass 100 kDa) • Mass 166 x 10-24 kg • Density 1.38 x 103 kg / m3 • Volume 120 nm3 • Radius 3 nm • Drag Coefficient 60 pN-sec / m • Deformation of protein in a viscous fluid

  17. b small b middling b large Driven SHM with Resistance • Apply a sinusoidal force, F0 cos (wt), and now consider what A andb do, w  w  w0

  18. Microcantilever resonance-based DNA detection with nanoparticle probes Change the mass of the cantilever and change the resonant frequency and the mechanical response. Su et al., APPL. PHYS. LETT. 82: 3562 (2003)

  19. Stick - Slip Friction • How can a constant motion produce resonant vibrations? • Examples: • Strings, e.g. violin • Singing / Whistling • Tacoma Narrows Bridge • …

  20. Dramatic example of resonance • In 1940, a steady wind set up a torsional vibration in the Tacoma Narrows Bridge 

  21. Dramatic example of resonance • Eventually it collapsed 

  22. A D B C Exercise Resonant Motion • Consider the following set of pendulums all attached to the same string If I start bob D swinging which of the others will have the largest swing amplitude ? (A) (B) (C)

More Related