1 / 9

How to Handle Gas Cylinders

GasNTools is one of the most-trusted LPG Gas Cylinder Distributors in UAE. GasNTools gains in-depth experience by manufacturing and supplying gas in the past two decades. Enquire: https://www.gasntools.com/cylinder-supplies<br>

lincy
Download Presentation

How to Handle Gas Cylinders

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Handle Gas Cylinders?

  2. How to Handle Gas Cylinders? • Cylinders should never come in contact with any apparatus that uses electricity, because it can lead to internal arcing, which will damage or even melt the cylinders. Keep cylinders away from open flames, sparks, or slag. • Try to utilize the standard size of keys for all the gas cylinders. Avoid using worn keys and long wrenches, or trying to add more gas to them; do not lengthen the wrenches or restlessly stretch them.

  3. How to Handle Gas Cylinders? • There is a possibility of injury to the regulator if the regulator is attached before allowing the cylinder to drop to its proper pressure, even if you are aware of the potential. • In the event of gas leakage, close the valve and tighten the nut. And, if it does not seal the leaks, remove the pipe and cut it open. let your gas company know this issue.

  4. How to Handle Gas Cylinders? • The manifolds and cylinders shall be thoroughly inspected before and after each use to detect possible leakage between connection points. Liquid can be applied using a spray or brush to check for a possible leak while inspecting the joint or point of attachment. • Shut off valves when not in use and/while you're not actively working with the cylinder.

  5. How to Handle Gas Cylinders? • No welding or cutting equipment should be used unless oxygen and fuel regulators are attached. As well as making sure the correct LPG regulator is attached to the cylinders.

  6. How to Handle Gas Cylinders? • It is unsafe to use only a needle valve, as this could allow gases to flow in the wrong direction and create a vacuum in the cylinders. When the gases are shut off, a needle valve is used instead of a regulator, which may cut off the hose. • If a cylinder overheats due to inappropriate or incorrect use of the equipment, it must be vented right away or dealt with immediately.

  7. How to Handle Gas Cylinders? • Where the LPG cylinder is attached to the manifold, the crimp connector has to be present in the proper form. • The regulators and hoses should never be attached to the cylinders unless a proper trolley or cart is used. The cylinder mover must be in place when using a trolley valve.

  8. How to Handle Gas Cylinders? • If a cylinder overheats due to inappropriate or incorrect use of the equipment, it must be vented right away or dealt with immediately. • Never use cylinders as rollers, as work supports, and never use them as jack forms.

  9. Thank You

More Related