1 / 14

Pulping and Bleaching PSE 476/Chem E 471

Pulping and Bleaching PSE 476/Chem E 471. Lecture #11 Kraft Pulping Kinetics. Agenda. Effect of Variables on Kraft Pulping Wood Species Effective Alkali Sulfidity Kraft Cooking Models. Kinetics?.

lewis-chase
Download Presentation

Pulping and Bleaching PSE 476/Chem E 471

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pulping and BleachingPSE 476/Chem E 471 Lecture #11 Kraft Pulping Kinetics PSE 476: Lecture 11

  2. Agenda Effect of Variables on Kraft Pulping • Wood Species • Effective Alkali • Sulfidity • Kraft Cooking Models PSE 476: Lecture 11

  3. Kinetics? • It is important as a pulping engineer to understand how to produce pulp with the desired properties in the most economical fashion. • In order to do this, the kinetics of the pulping reactions need to be understood. • Pulping variables: • Wood: species, source, etc (discussed previously) • Chemical charge (EA, sulfidity, liquor/wood, etc) • Temperature PSE 476: Lecture 11

  4. Kraft Pulping:Effect of Wood Species Notes PSE 476: Lecture 11

  5. Effect of Effective Alkali on Kraft Pulping (1) • Simple story: if there is enough alkali present (with a certain level of sulfidity), pulp can be made. • Increasing EA will increase rate and degree of delignification. • Two ways of changing EA charge: • Increasing concentration of EA in white liquor • Increasing volume of White Liquor charged to digester • Increasing EA using either method will increase the rate of delignification and change pulp properties. • Concentration change may have a larger effect than White Liquor volume. Notes PSE 476: Lecture 11

  6. Lignin Removal:Effect of Effective Alkali (2) PSE 476: Lecture 11

  7. Lignin Removal:Effect of Effective Alkali (3) Higher levels of EA results in more lignin removal but also lower screened pulp yield. PSE 476: Lecture 11

  8. Lignin Removal:Effect of Effective Alkali (4) PSE 476: Lecture 11

  9. Effect of Increasing Effective Alkali on Pulp Properties. • In the kraft pulping of Scandinavian Pine, and increase in EA from 13.6% to 15.5% had the following effects: • Cooking time to yield cut in half. • Pulp yield at given kappa reduced. • Xylan content of pulp reduced while glucomannan content was increased. • Brightness increased. • Longer beating time to reached CSF. • Pulp strength properties (tear, breaking length,etc). changed. PSE 476: Lecture 11

  10. Removal of Glucomannans:Effect of Effective Alkali Why doesn’t EA affect glucomannan removal? PSE 476: Lecture 11

  11. Removal of Xylans:Effect of Effective Alkali Why does EA affect xylan removal? PSE 476: Lecture 11

  12. Lignin Removal:Effect of Sulfidity • Sulfidity effect zero order in initial delignification (this means that changing sulfidity has no effect on initial rate) • Sulfidity is important during bulk delignification • Effects final lignin/carbohydrate ratio • HS- does not react with carbohydrates PSE 476: Lecture 11

  13. Kraft Pulping KineticsLignin Removal: Effect of Sulfidity PSE 476: Lecture 11

  14. dL = k[Lignin]a[OH-]b[HS-]c[other variables]d dt Kraft Pulping KineticsKinetic Models • Reaction models have been developed which simulate the pulping process. • Models range from simple to quite complex. • Typically use the following reaction variables: • Time, Temperature, Alkali, Sulfidity, Liquor/Wood, Etc • Models roughly derived from the following expression: PSE 476: Lecture 11

More Related