1 / 15

Anglicky v odborných předmětech "Support of teaching technical subjects in English “

Anglicky v odborných předmětech "Support of teaching technical subjects in English “. Tutorial : Engineering technology Topic : Sintered metallic materials Prepared by: Ing. Elena Nová. Projekt Anglicky v odborných předmětech, CZ.1.07/1.3.09/04.0002

lerato
Download Presentation

Anglicky v odborných předmětech "Support of teaching technical subjects in English “

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Anglicky v odborných předmětech"Support ofteachingtechnicalsubjects in English“ Tutorial: Engineering technology Topic: Sinteredmetallicmaterials Prepared by: Ing. Elena Nová Projekt Anglicky v odborných předmětech, CZ.1.07/1.3.09/04.0002 je spolufinancován Evropským sociálním fondem a státním rozpočtem České republiky.

  2. Sintered metallic materials

  3. Sintered metallic materials Sintered materials Are produced from metallic powders steel / copper / tin / aluminum, which are pressed under great power into required shapes and in next process – sintering – are bonded into a new material with very high strength.

  4. Sintered metallic materials • Advantages of powder metallurgy: • Possibility to create complicated shapes (geared wheels, shapes, parts of absorbers etc.) • Possibility to make self greasing / benefit of porosity / sliding gears • Dimensional accuracy gain by precision tools for pressing and calibration • Complete usage of entry material (without waste) High efectivity in manufacturing of large series

  5. Sintered metallic materials • Disadvantages of sintering technology • Great press force is required • Press moulds are expensive • Size of products is limited due to pressing force and smaller net densening inside large products • Shape difficult parts with transversal holes or threads are not possible to press out.

  6. Sintered metallic materials • Technological process: • 1. Production of metal’s powder • 2. Mixing of press mixtures to achieve required chemical-physical properties of final product • 3. Pressing – pressed powder has geometrical shape of the final product • 4. Sintering – is made in an Oven with protective atmosphere at max. temp. 1140 deg. • 5. Final operation – depends on product applicability: • - calibration - conservation- saturation- honing- machining

  7. Sintered metallic materials • Powder manufacturing • Powders are produced as follows • - Physical – milling and crushing, is used mainly for Cu, Fe, Al, Cr, Mn • - atomization of liquid metal by air or water mainly for Pb, Zn, Sn, Al, Fe • - steam condensation used mainly for Zn, Cd • - chemically based on ore reduction is used with Cu, Ag, Fe, Ni, Co, W, Mo, Ti.

  8. Sintered metallic materials • Powders treatment • Mostly by • - powder reduction after their manufacture by spraying air • - powder drying off after their manufacture by spraying of water • - screening and classification of powder according to size of particles • - addition of other parts in accordance with production special requirements • - grease addition to improve pressing

  9. Sintered metallic materials • Powder pressing • Purpose is to achieve partly compact basic shape of final product before sintering. • Pressures therefore move in a range of 200 to2000 Mpa. • Strait-forward pressing can be • - one sided (pic. a) • - both sided (pic. b) • - from all sides (pic. c)

  10. Sintered metallic materials • At rolling - powder from holder entry between rolls, which press and compact it. Product are rods or strips • At extrusion through calibrated opening produce semi-products of rod’s shape.

  11. Sintered metallic materials • Powder Sintering • Sintering we understand a heat influencing on semi-product made in previous operation – compacting. • Sintering temperature depends on composition of coupled material. • In a case of semi-product sintering made from a single material, the chosen temperature is about 80% of its melting temperature. • Joining of powder particles is by diffusion.

  12. Sintered metallic materials • Sintering • Due to danger of oxidation is sintering made in protective atmosphere. • Calibration • Sintered products have satisfactory dimensional accuracy and surface quality. At a very high accuracy requirements a high precision calibration form is used.

  13. Answer the questions: • What is a sintering? • What steps are used for manufacturing of sintered products? • How accurate are sintered products? • Advantages of sintering materials? • Disadvantages of sintering materials?

  14. What have these products in common? • Name!

  15. Použitá literatura • http://www.ksp.tul.cz/cz/kpt/obsah/vyuka/skripta_tkp/sekce/04.htm

More Related