1 / 9

Team Zephyr

Team Zephyr. Sam Evans, Alex Morrow, Huy Le, Joe Sheehey, Logan Wright, Andrew Zizzi 9-23-08. Mission Overview.

leo-larson
Download Presentation

Team Zephyr

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Team Zephyr Sam Evans, Alex Morrow, Huy Le, Joe Sheehey, Logan Wright, Andrew Zizzi 9-23-08

  2. Mission Overview • The BalloonSat Zephyr shall ascend to an altitude of approximately 31,000 meters while stabilizing camera images with a gyro and performing measurements on ambient sky brightness to better understand the wavelength ranges high altitude observatories could utilize. • Project Zephyr shall provide data on the most efficient operational wavelength range for high altitude telescope platforms by showing which wavelengths of light between ultraviolet and infrared best penetrate the atmosphere as altitude increases. • The primary mission of Team Zephyr is to determine the most efficient altitude and wavelength of light that a high altitude telescope platform should be positioned in to image the sky.

  3. Design • Foamcore Box • Dense Foam Reinforcing members • Fiberglass Corner Reinforcing Strips • Insulation between Dense Foam Structure • Heater • Located close to Batteries • Center of Gravity • Camera, Gyro and Hobo’s evenly distributed • LED’s • On all 4 sides plus top • Cutout sections to shade LED’s from direct sunlight • Covers wavelengths between Infrared and Ultraviolet

  4. Design

  5. Design

  6. LED Photometers • LED Colors: • Infrared, red, orange, yellow, green, blue, violet, ultraviolet, and white • Wavelengths 940-365 nm

  7. System Diagram

  8. Organization Chart and Schedule

  9. Budgets Component Mass Cost Structure 350g $0[1] Fiberglass $15 Camera (Canon A570IS with batteries) 222g $0[1] HOBO H08-004-02 29g $0[1] HOBO (To record Voltage) 29g $0[1] LEDs Red (10) 1.5g $0[2] Orange (10) 1.5g $0[2] Yellow (10) 1.5g $0[2] Green (10) 1.5g $0[2] Blue (10) 1.5g $0[2] Violet (10) 1.5g $0[2] White (10) 1.5g $0[2] Infrared (10) 1.5g $10 Ultraviolet (10) 1.5g $10 Heater 15g $10 9V Batteries (3) 137.7g (45.9g each) $0[1] Gyro 150g $75 Wiring 20g Total: 966.2g $120 [1]These components shall be provided by Professor Chris Koehler [2]These components shall be procured from www.purdyelectronics.com as free sample LEDs

More Related