1 / 14

A Two Degrees of Freedom PID Control System, its Features and Applications

National Taiwan Ocean University Department of Communications, Navigation and Control Engineering. A Two Degrees of Freedom PID Control System, its Features and Applications. Masanori Yukitomo, Takashi Shigemasa , Yasushi Baba, Fumio Kojima. Speaker :林湧傑 ID : 19967042 Date : 11/17/2010.

leena
Download Presentation

A Two Degrees of Freedom PID Control System, its Features and Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. National Taiwan Ocean University Department of Communications, Navigation and Control Engineering A Two Degrees of Freedom PID Control System, its Features and Applications Masanori Yukitomo, Takashi Shigemasa , Yasushi Baba, Fumio Kojima Speaker:林湧傑 ID:19967042 Date:11/17/2010

  2. Outline • Introduction • MD TDOF PID -Block diagram of a Model-Driven TDOF PID control system -A designing approach -Features -Practical industrial field experiments • Conclusions

  3. Introduction • PID為PD與PI結合而成的控制器,Gc(s)=Kp+KI/s+KDS。 優點:構造簡單,提供不錯的穩態誤差及相對穩定度 缺點:PID控制器的參數設計通常很困難, • MD PID:Model-Driven Control ,為了使參數調整簡單化而設計,ex:IMC(Internal Model Control) and DMC(Dynamic Matrix Control)。 特色:構造簡單、增加穩定性及強健性、參數容易調整。 • MD TDOF PID :Model-Driven Two Degrees Of Freedom PID 目的 : 減少因為干擾造成的誤差,在不穩定的狀態中依然可以使用

  4. Block diagram of a Model-Driven TDOF PID control system (a)Set-point filter (b)Main controller: Gain . Q filter(second order) . Delay model with dead time(first order) (c) PD feedback compensator

  5. Designing Approach • Step 1:PD feedback compensator 功能:(a) stabilize even unstable processes P(s) (b) compensate the transfer function from v to y 設計方法: 找出P(s)的轉移函數,接著調整F(s) 讓G(s)近似於

  6. Designing Approach • Step 2: Main Controller (a)KC = K :Gain (b)TC = T :Time constant (c)LC = L :Dead time • Step 3: Set-point filter

  7. Features • Widely applicable process controller 透過PDfeedback內各種參數的調整,可以將各種不同的程序 轉變成一階的延遲系統,因此這種PID對於各類系統的泛用性很 高。 • Two degrees of freedom characteristics 調整F 達到good tracking property without overshooting 調整Q 達到quick disturbanceregulatingproperty

  8. Practical industrial field experiments • Boiler test plant (a) 傳統PID(IMC) MDTDOFPID 以IAE(絕對誤差積分準則)及settling time(安定時間)來比較,MD TDOF PID 皆優於傳統的PID

  9. Practical industrial field experiments • Boiler test plant (b) 傳統PID(IMC) MDTDOFPID 很明顯的,MD TDOF PID對於干擾的靈敏度以及矯正的能力皆優於傳統的PID控制器

  10. Practical industrial field experiments • Paper manufacturing plant

  11. Conclusions • The MD TDOF PID control system has strong capability to stabilize by using the PD feedback. • Various types of PID control systems can be realized from the MD TDOF PID control system smoothly by setting control parameters. • Through practical industrial field experiments, practical effectiveness for the MD TDOF PID Control system such as the quick responses for both set-point tracking and disturbance regulating response are shown.

  12. References • [1] Araki Mitsuhiko, 2-degrees of freedom controller part I,Trans. Japan Associ. of Control Engineers,29, 649, 1985. • [2] Astrom K.J. and T. Hagglund, PID Control Theory, Design and tuning, ISA, 1995. • [3] Astrom K.J.,T.Hagglund, Benchmark systems for PID Control, Priprint of IFAC PID2000 Workshop, Terrassa, Spain, 2000. • [4] Brosilow C., B. Joseph, Techniques of Model-Based Control, Prentice Hall publishes, 2002. • [5] Control Technology Survey Report in Japan, Society of Instrument Control Engineers Japan,1996. (In Japanese) • [6] Desborough L.,Randy Miller, Increasing Customer Value of Industrial Control Performance Monitoring , Preprints of Chemical Process control-6,153/186,Tucson, 2001. • [7] Hiroi K. and Y. Terauchi, Two Degrees of Freedom Algorithm, Proceedings of the ISA , Houston, 1986. • [8] Iino Y, T. Shigemasa, Practical Modeling and Control System Design Methods for CAE system,TP10-5:15,pp.1748-1753,The proceedings of the American Control Conference, Pittsburgh, 1989.

  13. References • [9] Kimura H, Is the Model a Good Controller? – Perspectives on Brain Motor Control,39 the IEEE Conference on Decision and Control, , Sydney, 2000. • [10] Kitamori Toshiyuki, A design method for control systems based upon partial knowledge about controlled processes, Trans. of Society of Instrument and Control Engineers,15-4,549-555, 1979. (In Japanese) • [11] Kitamori Toshiyuki, Partial Model Matching Method conformable to Physical and Engineering Actualities,Preprints of 1st IFAC Symposium on System Structure and Control, 2001. • [12] Morari M. and E. Zafiriou, Robust Process Control.,Prentice-Hall, Inc.Englewood Cliffs, N.J., 1989. • [13] Rivera,D.E.,M.Morari,and S.Skogestad, “Internal Model Control 4.PID Controller Design, ”Ind.Eng. Chem. Process Des. Dev.25 ,252, 1986 • [14] Shigemasa T., Y. Iino and M. Kanda, Two Degrees of Freedom PID Auto-tuning Controller, 87-1191, Proceedings of the ISA, Anaheim, 1987. • [15] Shigemasa T., M. Yukitomo, R. Kuwata, T. Hattori and Y.Baba, A Model-Driven PID Controller, Proceedings of INTERMAC 2001, Tokyo, 2001.

  14. References • [16] Shigemasa T., M. Yukitomo, R. Kuwata, A Model-Driven PID Control System and its Case Studies, PP.571/576, Proceedings of the 2002 IEEE International Conference on Control Applications Glasgow, 2002. • [17] Shinskey F.G, PID-DEADTIME CONTROL OF DISTRIBUTED PROCESS, Preprint of the IFAC PID2000 Workshop, Terrassa, Spain, 2000. • [18] Shinskey F.G, Feedback Controllers for the Process Industries, McGraw-Hill, 1994. • [19] Starr J., Realization of truncated impulse responses with prescribed uncertainty, IFAC’81 world Congress, Kyoto, Japan, 1981. • [20] Suda N., PID Control, Asakura Publishing Company, 1992.(In Japanese) • [21] Takatsu H., T. Itou, Future Needs for Control Theory in Industry-- Report of the Control Technology Survey in Japanese Industry, IEEE Trans. on Control Systems Technology, 07-03, pp.298-305, 1999

More Related