1 / 13

Local buckling design without effective width new developments in the building industry

Local buckling design without effective width new developments in the building industry. TRB - A2C06 Committee Meeting January 2004 Ben Schafer, Ph.D. The Johns Hopkins University. Profiles evolve – how does design keep up?. Direct Strength.

ldustin
Download Presentation

Local buckling design without effective width new developments in the building industry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Local buckling design without effective widthnew developments in the building industry TRB - A2C06 Committee Meeting January 2004 Ben Schafer, Ph.D. The Johns Hopkins University

  2. Profiles evolve – how does design keep up?

  3. Direct Strength • In the building industry we have recently added a new alternative method for local buckling design that: • requires no effective width calculation, and • incorporates a numerical analysis that accurately predicts local buckling even for complicated cross-sections.

  4. Examine bending Fictitious profile Local buckling occurs at 0.75 of the reference bending load

  5. Idea for incremental profile improvement Local buckling at 4 times reference Local buckling at 2.7 times reference • Big boost from 0.75! I want to take advantage of that…. • hard to calculate by hand • effective width becomes overly complicated

  6. Conventional approach • Via a specification we get • all local buckling modes, • effective widths, • effective properties, and • finally the strength.

  7. Direct Strength Approach • Via alternative we get • all local buckling modes calculated exactly, and • the strength.

  8. M,T Direct Strength for Pipe… (could be strain based)

  9. Thrust - Columns • Lipped channels • Lipped zeds • Lipped channels with int. web stiffener • Hat sections • Rack post sections 267 columns , b = 2.5, f = 0.84

  10. Bending - Beams • Lipped and plain channels • Lipped zeds • Hats with and without intermediatestiffener(s) in the flange • Decks with and without intermediate stiffener(s) in the web and the flange 569 beams, b=2.5, f=0.9

  11. DSM for flexible pipe? • More research would be needed to bring the Direct Strength Method to flexible pipe, but the existing research plus the success of the AASHTO method demonstrate it is possible. • Design for thin-walled flexible pipe has benefited from existing research, new design methods provide new opportunities for simplificationandoptimization.

  12. www.ce.jhu.edu/bschafer CUFSM DSM Pipe

More Related