1 / 80

Chapter 8 The Routing Table: A Closer Look

Chapter 8 The Routing Table: A Closer Look. The Routing Table Structure. Understanding the Routing Table. Understanding the structure and lookup process of the routing table Help you diagnose any routing table issue Regardless of your level of familiarity with the routing protocol.

lbecker
Download Presentation

Chapter 8 The Routing Table: A Closer Look

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 8The Routing Table: A Closer Look

  2. The Routing Table Structure

  3. Understanding the Routing Table • Understanding the structure and lookup process of the routing table • Help you diagnose any routing table issue • Regardless of your level of familiarity with the routing protocol. • Is the packet is being forwarded as expected? Why or why not? • Forwarded elsewhere? Discarded? • For more details: Cisco IP Routing

  4. The Routing Table Structure Router# show ip route 172.16.0.0/24 is subnetted, 4 subnets S 172.16.4.0 is directly connected, Serial0/0/1 R 172.16.1.0 [120/1] via 172.16.2.1, 00:00:08, Serial0/0/0 C 172.16.2.0 is directly connected, Serial0/0/0 C 172.16.3.0 is directly connected, FastEthernet0/0 10.0.0.0/16 is subnetted, 1 subnets S 10.1.0.0 is directly connected, Serial0/0/1 C 192.168.1.0/24 is directly connected, Serial0/0/1 S 192.168.100.0/24 is directly connected, Serial0/0/1 • The structure of the routing table might seem obvious. • Help you verify and troubleshoot routing issues because you will understand the routing table lookup process. • You will know exactly what the Cisco IOS software does when it searches for a route.

  5. Topology • Notice that R3 also has a 172.16.4.0/24 subnet that is disconnected, or discontiguous, from the 172.16.0.0 network that R1 and R2 share. • The effects of this discontiguous subnet are examined later in this chapter when you look at the route lookup process.

  6. Topology: Interface Configurations for R1 and R3 R1(config)# interface FastEthernet0/0 R1(config-if)# ip address 172.16.1.1 255.255.255.0 R1(config-if)# no shutdown R1(config-if)# interface Serial0/0/0 R1(config-if)# ip address 172.16.2.1 255.255.255.0 R1(config-if)# clock rate 64000 R1(config-if)# no shutdown R3(config)# interface FastEthernet0/0 R3(config-if)# ip address 172.16.4.1 255.255.255.0 R3(config-if)# no shutdown R3(config-if)# interface Serial0/0/1 R3(config-if)# ip address 192.168.1.2 255.255.255.0 R3(config-if)# no shutdown

  7. Sample Routing Table Entries Router# show ip route 172.16.0.0/24 is subnetted, 4 subnets S 172.16.4.0 is directly connected, Serial0/0/1 R 172.16.1.0 [120/1] via 172.16.2.1, 00:00:08, Serial0/0/0 C 172.16.2.0 is directly connected, Serial0/0/0 C 172.16.3.0 is directly connected, FastEthernet0/0 10.0.0.0/16 is subnetted, 1 subnets S 10.1.0.0 is directly connected, Serial0/0/1 C 192.168.1.0/24 is directly connected, Serial0/0/1 S 192.168.100.0/24 is directly connected, Serial0/0/1 • Route entries from the following sources: • Directly connected networks • Static routes • Dynamic routing protocols • The source of the route does not affect the structure of the routing table

  8. Level 1 Routes R2# debug ip routing IP routing debugging is on R2# conf t R2(config)# interface serial 0/0/1 R2(config-if)# ip address 192.168.1.1 255.255.255.0 R2(config-if)# clock rate 64000 R2(config-if)# no shutdown R2(config-if)# 00:11:06: %LINK-3-UPDOWN: Interface Serial0/0/1, changed state to up R2(config-if)# RT: add 192.168.1.0/24 via 0.0.0.0, connected metric [0/0] RT: interface Serial0/0/1 added to routing table R2(config-if)# end R2# undebug all All possible debugging has been turned off • Serial 0/0/1 interface for R2 is configured with the 192.168.1.1/24 address • As soon as no shutdownis entered, the output from debug ip routingshows that this route has been added to the routing table.

  9. Level 1 Routes RT: add 192.168.1.0/24 via 0.0.0.0, connected metric [0/0] RT: interface Serial0/0/1 added to routing table R2(config-if)# end R2# show ip route <output omitted> C 192.168.1.0/24 is directly connected, Serial0/0/1 • The routing table is actually a hierarchical structure that is used to speed up the lookup process when locating routes and forwarding packets. • Within this structure, the hierarchy includes several levels. • For simplicity, we discuss all routes as one of two levels: level 1 or level 2.

  10. Level 1 Routes R2# show ip route <output omitted> C 192.168.1.0/24 is directly connected, Serial0/0/1 • A level 1 route is a route with a subnet mask equal to or less than the classful mask of the network address. • 192.168.1.0/24 is a level 1 network route because the subnet mask is equal to the network’s classful mask. • /24 is the classful mask for Class C networks, such as the 192.168.1.0 network.

  11. Level 1 Routes We will be using this chart throughout this chapter. • A level 1 route can function as any of the following: • Default route: A default route is a static route with the address 0.0.0.0/0. • Supernet route: A supernet route is a network address with a mask less than the classful mask. • Network route: A network route is a route that has a subnet mask equal to that of the classful mask. • A network route can also be a parent route (next).

  12. Level 1 Routes • The level 1 route 192.168.1.0/24 can be further defined as an ultimate route. • An ultimate route is a route that includes one or both of the following: • A next-hop IP address (another path) • An exit interface

  13. Level 1 Routes • Directly connected network 192.168.1.0/24 is a • level 1 network route - subnet mask that is the same as its classful mask. • ultimate route - contains the exit interface Serial 0/0/1.

  14. Parent and Child Routes: Classful Networks R2(config)# interface fastethernet 0/0 R2(config-if)# ip address 172.16.3.1 255.255.255.0 R2(config-if)# no shutdown R2(config-if)# end R2# show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, <text omitted> Gateway of last resort is not set 172.16.0.0/24 is subnetted, 1 subnets C 172.16.3.0 is directly connected, FastEthernet0/0 C 192.168.1.0/24 is directly connected, Serial0/0/1 Level 1 Parent Route Level 2 Child Route • Another type of level 1 network route, a parent route. • When the 172.16.3.0 subnet was added to the routing table, • Another route, 172.16.0.0 also added. • First entry: nonext-hop IP address or exit interface information. • This route is known as a level 1 parent route.

  15. Parent and Child Routes: Classful Networks R2# show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, <text omitted> Gateway of last resort is not set 172.16.0.0/24 is subnetted, 1 subnets C 172.16.3.0 is directly connected, FastEthernet0/0 C 192.168.1.0/24 is directly connected, Serial0/0/1 Level 1 Parent Route Level 2 Child Route • A parent route is a heading: • Indicates the presence oflevel 2 routes, also known as child routes. • A level 1 parent route is automatically created any time a subnet is added to the routing table. • A parent route is created whenever a route with a mask greater than the classful mask is entered into the routing table. • The subnet 172.16.3.0 is the level 2 child route of the parent route172.16.0.0.

  16. Parent and Child Routes: Classful Networks Level 1 Parent Route Level 2 Child Route • A level 2 route is a route that is a subnet of a classful network address. • Like a level 1 route, the source of a level 2 route can be a : • directly connected network • static route • dynamic routing protocol.

  17. Parent route: • 172.16.0.0: The classful network address for our subnet. • /24: The subnet mask for all the child routes. If the child routes have variable-length subnet masks (VLSM), the subnet mask will be excluded from the parent route and included with the individual child routes. (later). • is subnetted, 1 subnets: This part of the route specifies that this is a parent route and in this case has one child route (that is, one subnet).

  18. Child route: • C: The route code for a directly connected network. • 172.16.3.0: The specific route entry. • is directly connected: Along with the route code of C, this specifies that this is a directly connected network with an administrative distance of 0. • FastEthernet0/0: The exit interface for forwarding packets that match this specific route entry.

  19. A level 2 child routecontains the route source and the network address of the route. • Notice that the subnet mask is not included with the subnet, the level 2 child route. • The subnet mask for this child route is the /24 mask included in its parent route, 172.16.0.0. • Level 2 child routes are also considered ultimate routes because they contain the next-hop IP address or exit interface.

  20. Adding another child route R2(config)# interface serial 0/0/0 R2(config-if)# ip address 172.16.2.2 255.255.255.0 R2(config-if)# no shutdown R2(config-if)# end R2# show ip route 172.16.0.0/24 is subnetted, 2 subnets C 172.16.2.0 is directly connected, Serial0/0/0 C 172.16.3.0 is directly connected, FastEthernet0/0 C 192.168.1.0/24 is directly connected, Serial0/0/1 • The routing table shows two child routes for the same 172.16.0.0/24 parent route. • 172.16.2.0 and 172.16.3.0 are members both members of the 172.16.0.0/16 classful network. • Because both child routes have the same subnet mask, the parent route still maintains the /24 mask but now shows two subnets. • Later we will see the role of the parent route.

  21. Adding another child route If child routes are deleted there is no parent route. • If there is only a single level 2 child route and that route is removed, the level 1 parent route is automatically deleted. • A level 1 parent route exists only when there is at least one level 2 child route.

  22. Parent and Child Routes: Classless Networks • For this discussion, we switch briefly to the RouterX topology.

  23. Parent and Child Routes: Classless Networks RouterX# show ip route 172.16.0.0/16 is variably subnetted, 3 subnets, 2 masks C 172.16.1.4/30 is directly connected, Serial0/0/0 C 172.16.1.8/30 is directly connected, Serial0/0/1 C 172.16.3.0/24 is directly connected, FastEthernet0/0 • All three subnets belong to the classful network 172.16.0.0/16 and are therefore level 2 child routes. • Notice that the child routes do not share the same subnet mask, as was the case in the classful example. • Implementing a network addressing scheme with VLSM. • Whenever there are two or more child routes with different subnet masks belonging to the same classful network, the routing table presents a slightly different view, which states that this parent network is variably subnetted.

  24. Parent and Child Routes: Classless Networks • The parent route of 172.16.0.0 now contains the classful mask /16. • In the classful example shown earlier the classful mask was not displayed. • Parent route states that the child routes are variably subnetted. • Includes the number of different masks of the child routes (2 masks). • Each child route now contains the subnet mask for that specific route. • In the non-VLSM example both child routes shared the same subnet mask, and the parent displayed their common subnet mask.

  25. Parent route: • 172.16.0.0: The parent route, the classful network address associated with all child routes • /16: The classful subnet mask of the parent route • variably subnetted: States that the child routes are variably subnetted and that there are multiple masks for this classful network • 3 subnets, 2 masks: Indicates the number of subnets and the number of different subnet masks for the child routes under this parent route

  26. Child route: • C: The route code for a directly connected network • 172.16.1.4: The specific route entry • /30: The subnet mask for this specific route • is directly connected: Along with the route code of C, specifies that this is a directly connected network with an administrative distance of 0 • Serial0/0/0: The exit interface for forwarding packets that match this specific route entry

  27. Routing Table Lookup Process

  28. Routing Table Lookup Process IP Packet Routing Table • When a router receives a packet on one of its interfaces. • The routing table lookup process compares the destination IP address of the incoming packet with the entries in the routing table. • The best match between the packet’s destination IP address and the route in the routing table is used to determine to which interface to forward the packet. Find “best match”

  29. Steps in the Route Table Lookup Process R1(config)# router rip R1(config-router)# network 172.16.0.0 R2(config)# router rip R2(config-router)# network 172.16.0.0 R2(config-router)# network 192.168.1.0 R3(config)# router rip R3(config-router)# network 172.16.0.0 R3(config-router)# network 192.168.1.0 • We have specifically chosen a classful routing protocol with our discontiguous 172.16.0.0 subnets. • The reason for this will become evident in a later section.

  30. Steps in the Route Table Lookup Process R1# show ip route 172.16.0.0/24 is subnetted, 3 subnets C 172.16.1.0 is directly connected, FastEthernet0/0 C 172.16.2.0 is directly connected, Serial0/0/0 R 172.16.3.0 [120/1] via 172.16.2.2, 00:00:25, Serial0/0/0 R 192.168.1.0/24 [120/1] via 172.16.2.2, 00:00:25, Serial0/0/0 R2# show ip route 172.16.0.0/24 is subnetted, 3 subnets R 172.16.1.0 [120/1] via 172.16.2.1, 00:00:07, Serial0/0/0 C 172.16.2.0 is directly connected, Serial0/0/0 C 172.16.3.0 is directly connected, FastEthernet0/0 C 192.168.1.0/24 is directly connected, Serial0/0/1 • Neither R1 nor R2 has a route to 172.16.4.0. • Also, R3 does not have routes to subnets 172.16.1.0/24, 172.16.2.0/24, or 172.16.3.0/24. R3# show ip route 172.16.0.0/24 is subnetted, 1 subnets C 172.16.4.0 is directly connected, FastEthernet0/0 C 192.168.1.0/24 is directly connected, Serial0/0/1

  31. The Route Lookup Process Routing Table Step 1. • The router examines level 1 routes, including network routes and supernet routes, for the best match with the destination address of the IP packet

  32. The Route Lookup Process Routing Table Step 1a. • If the best match is a level 1 ultimate route—a classful network, supernet, or default route—this route is used to forward the packet

  33. The Route Lookup Process Routing Table Step 1b. • If the best match is a level 1 parent route, proceed to Step 2

  34. The Route Lookup Process Routing Table Step 2. • The router examines child routes (the subnet routes) of the parent route for a best match.

  35. The Route Lookup Process Routing Table Step 2a. • If there is a match with a level 2 child route, that subnet is used to forward the packet.

  36. The Route Lookup Process Routing Table Step 2b. • If there is not a match with any of the level 2 child routes, proceed to Step 3.

  37. The Route Lookup Process Routing Table Step 3. • Is the router implementing classful or classless routing behavior. (later) • Router(config)# no ip classless • Router(config)# ip classless

  38. The Route Lookup Process Routing Table Step 3a. • If classful routing behavior is in effect, terminate the lookup process and drop the packet. • Router(config)# no ip classless

  39. The Route Lookup Process Routing Table Step 3b. • If classless routing behavior is in effect, continue searching level 1 supernet routes in the routing table for a match, including the default route, if there is one.

  40. The Route Lookup Process Routing Table Step 4. • If there is now a lesser match with a level 1 supernet or default routes, the router uses that route to forward the packet.

  41. The Route Lookup Process Routing Table Step 5. • If there is not a match with any route in the routing table, the router drops the packet.

  42. Longest Match • (Digressing from topology) • For there to be a match between the destination IP address of a packet and a route in the routing table,a minimum number of leftmost bits must match between the IP address of the packet and the route in the routing table. • The subnet mask of the route in the routing table is used to determine the minimum number of leftmost bits that must match. • IP packetonly contains the IP address and not the subnet mask.

  43. Longest Match • The best match or longest match is the route in the routing table that has the greatest number of leftmost matching bits with the destination IP address of the packet. • The route with the greatest number of equivalent leftmost bits, or the longest match, is always the preferred route. • Subnet mask in routing table specifies the minimum number of leftmost matching bits – the only bits that are considered. All three routes match but Route 3 has the longest match.

  44. Example: Level 1 Ultimate Route

  45. Example: Level 1 Ultimate Route • PC1 sends a ping to 192.168.1.2, the serial interface on R3. R1# show ip route 172.16.0.0/24 is subnetted, 3 subnets C 172.16.1.0 is directly connected, FastEthernet0/0 C 172.16.2.0 is directly connected, Serial0/0/0 R 172.16.3.0 [120/1] via 172.16.2.2, 00:00:25, Serial0/0/0 R 192.168.1.0/24 [120/1] via 172.16.2.2, 00:00:25, Serial0/0/0

  46. 192.168.1.2 • The router first examines level 1 routes for the best match. R1# show ip route 172.16.0.0/24 is subnetted, 3 subnets R 192.168.1.0/24 [120/1] via 172.16.2.2, 00:00:25, Serial0/0/0

  47. 192.168.1.2 • There is a match between the destination IP address 192.168.1.2 and the level 1 ultimate route of 192.168.1.0/24. • R1 uses this route and forwards the packet out interface Serial 0/0/0. R1# show ip route 172.16.0.0/24 is subnetted, 3 subnets R 192.168.1.0/24 [120/1] via 172.16.2.2, 00:00:25, Serial0/0/0

  48. 192.168.1.2 Example: Level 1 Ultimate Route • Why is there a match with the 192.168.1.0/24 level 1 route and not with one of the 172.16.0.0 subnets? • Why is there not a match with any of the 172.16.0.0/24 subnets in the routing table?

  49. 192.168.1.2 Example: Level 1 Ultimate Route • 172.16.0.0/24 is a parent route of three subnets or child routes. • Before a child route is examined for a match, there must be at least a match between the destination IP address of the packet and the classful address of the parent route, or 172.16.0.0/16. • 16 bits (/16) must match the route 172.16.0.0/16 – no match!

  50. 192.168.1.2 Example: Level 1 Ultimate Route • The route, 192.168.1.0, is a level 1 ultimate route and, therefore, it also contains the subnet mask, /24. • Not only does the minimum of 24 bits match, but a total of 30 bits match. • Because there is not a longer, more specific match, the packet is forwarded out the exit interface Serial 0/0/0.

More Related