1 / 35

Laser Fusion Power Development: A Plan for 35 Years

This article presents a detailed plan for the development of electrical power through laser fusion in the next 35 years, highlighting the different stages, costs, and advancements in technology.

lbazile
Download Presentation

Laser Fusion Power Development: A Plan for 35 Years

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. less than A plan to develop electrical power with Laser Fusion in 35 years Introduction John Sethian (NRL) Steve Obenschain (NRL), Camille Bibeau (LLNL), and Steve Payne (LLNL) With lots of help from: References D. Weidenheimer, Titan PSD Sombrero Power Plant Study L. Brown and D. Goodin, GA National Ignition Facility W. Meier, LLNL "2 MJ Laser Facility" by M.W. McGeoch Presented to FESAC Development Path Panel General Atomics January 14, 2003

  2. Lasers and direct drive targets can lead to an attractive power plant… Electricity Generator Target factory Dry wall (passive) chamber Modular Laser Array Final optics Spherical target Modular, separable parts: lowers cost of development AND improvements Targets are simple spherical shells: “fuel” lends itself to automated production Pursuing dry wall (passive) chamber because of simplicity Past power plant studies have shown concept economically attractive

  3. Summary of Elements, Cost, and Schedule to developLaser Fusion Energy 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 $140 M $650 M ($65M/yr) $4,947 M ($350M/yr) $ 1,000M ?? 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 YEAR Phase I Applied IFE R&D • Phase II • IFE Science &Technology • Full scale beam lines • High Gain Physics • Integration Experiments • Phase III: Engineering Test Facility • Full size driver ( 2 MJ) • Optimize Targets for High Yield • Develop/optimize chamber comp • Electricity Production (~300 MWe) Specific Criteria must be met before proceeding to the next phase DEMO High Availability Commercial worthy Costs include Capital, Operating, Contingency, Fees, Management

  4. Phase I: Develop Science and Technologyfor Laser Fusion Energy as an integrated system.( 8 Government labs, 7 Universities, 8 Private Industries) Target factory Lasers Lasers KrF: NRL Titan PSD, SAIC, PPPL, Georgia Tech, Commonwealth Tech DPSSL: LLNL Coherent, Onyx, DEI, Northrup, UR/LLE Target Fabrication Target Fabrication GA: Fab, charac, mass production LANL: Adv foams SCHAFER: DvB foams Target Injection Target Injection GA: Injector, injection & tracking LANL: DT mech prop, thermal resp. Direct Drive Target Design Direct Drive Target Design NRL: Target design LLNL: Yield spectrum, design UR/LLE: Target Design (DP program) Chambers and Materials Chambers & Materials WISCONSIN: Yield spectrum / Chambers LLNL: Alt chamber concepts, materials UCSD/ANL/INEEL: Chamber dynamics SNL: Materials response x-rays/ions ORNL/UCLA/UCSB/Wisconsin: Materials Final Optics Final Optics LLNL: X-rays, ions, neutrons UCSD: Laser, debris mitigation

  5. Laser IFE development leverages two main thrusts in DOE High Average Power Laser (HAPL) Program Currently funded throughNNSA/Defense Programs Rep-Rate Lasers High Gain Target Design & Experiments Mass Production of Targets Target Injection Final Optics Chambers Fusion Program (Office of Science): System Studies (ARIES) Blanket/Breeders Materials ICF Program (NNSA/Defense Programs): Target Design Target Experiments Single Shot Target Fab

  6. Foam + DT DT Fuel 4.0 MJ KrF laser DT Vapor 2 mm radius Gain 1.48 MJ KrF laser 200 150 0 0 500 500 1000 1000 1500 1500 0 0 100 Pd thickness (Angstroms) 50 0 A Typical Direct Drive Target 1-D Pellet Gain 120-180- sufficient for Energy High Gain Target (sector of spherical target) NRL 2-D single Mode Calculations Pulse Gain Shell Shape Break-up Normal 180 83% "Pickett" 110 2% LLNL, (UR/LLE, NRL)

  7. Kr+F LASER electron beam gas Two types of lasers are under development for Fusion Energy E-beam Pumped Krypton Fluoride Laser (KrF)---- "Electra" at NRL Diode Pumped Solid State Lasers (DPPSL)--- "Mercury" at LLNL Diodes Crystal LASER Both lasers recently achieved first light Both have the potential to meet IFE requirements, but have different challenges

  8. Highlights of Progress to date See 12/6/02 meeting summary for further details : http://aries.ucsd.edu/HAPL/SUMMARIES/02-12-16HAPLmtgSummary.pdf Both DPPSL and KrF lasers demonstrated first light Target design advances: picket, high gain Projected targets cost of 16 cents each Made foam shells of required dimensions Target injector/tracking system nearing completion Enhanced DT ice smoothness w/ foams and at 16 degrees K Grazing incidence metal mirrors exceed required laser damage threshold Less helium retention in tungsten when cycled at elevated temps Four facilities used for matl's evaluation (x-rays and ions) First generation chamber dynamics code completed Chamber operating windows identified with both advanced and current materials

  9. Elements, Cost, & Schedule to develop Laser Fusion Energy 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Phase I $140 M Phase II $650M($65M/yr) Phase III: ETF: $4,947 M ($350M/yr) DEMO $ 1,000M ?? Lasers: $105 M Targets $15 M Optics $4.8 M Chamber $7.0 M Materials $6.8 M

  10. Criteria to go from Phase I to Phase II (page 1 of 3) • LASERS • Develop technologies that can meet fusion energy requirements for efficiency (> 6%), repetition rate (5-10 Hz), and durability (>100,000,000 shots continuous). • Demonstrate required laser beam quality and pulse shaping. • Laser technologies employed must scale to reactor size laser modules and project have attractive costs for commercial fusion energy. • FINAL OPTICS • Meet laser induced damage threshold (LIDT) requirements of more than 5 Joules/cm2, in large area optics. • Develop a credible final optics design that is resistant to degradation from neutrons, x-rays, gamma rays, debris, contamination, and energetic ions.

  11. Criteria to go from Phase I to Phase II (page 2 of 3) • CHAMBERS • Develop a viable first wall concept for a fusion power plant. • Produce a viable “point design” for a fusion power plant. • TARGET FABRICATION • Develop mass production methods to fabricate cryogenic DT targets that meet the requirements of the target design codes and chamber design. Includes characterization. • Combine these methods with established mass production costing models to show targets cost will be less than $0.25.

  12. Criteria to go from Phase I to Phase II (page 3 of 3) • TARGET INJECTION AND TRACKING • Build an injector that accelerates targets to a velocity to traverse the chamber (~6.5 m) in 16 milliseconds or less. • Demonstrate target tracking with sufficient accuracy for a power plant (+/- 20 microns). • TARGET DESIGN/PHYSICS • Develop credible target designs, using 2D and 3D modeling, that have sufficient gain (> 100) + stability for fusion energy. • Benchmark underlying codes with experiments on Nike & Omega. • Integrate design into needs of target fab, injection and reactor chamber.

  13. Description of Phase II (page 1 of 5) • Top Level Objective: • Establish Science and Technology to build and JUSTIFY the Engineering Test Facility (ETF). • Phase II will consist of six components. 1. Laser Facility--primary function Lasers: Build a full-scale (power plant sized) laser beam line using the best laser choice to emerge from Phase I: (KrF: 60 kJ) (DPPSL: 6 kJ) Final optics/target injection: Use the above beam line to repetitively hit a target injected into a chamber, with the required precision. Measure optics "Laser Induced Damage Threshold" (LIDT) durability.

  14. Venus Laser: 6 kJ KrF Laser Amplifier 60 kJ • ~ 3 kJ / aperture • 2 “bundled” apertures • 40 kJ/e-beam • 16 bundled electron beams What are Full Scale Beam Lines? (page 2 of 5) Full scale is defined as the size that will be replicated N times for the ETF, M times for DEMO. N may equal M. Forty 60 kJ Amps ~2.4 MJ ETF 12 bundled apertures = Terra (36 kJ) 60 x Terra = Helios ~2.1 MJ ETF Laser 60 kJ Requires 3x scaled up crystal growth Requires 10x scaled e-beam diodes

  15. Injected target (may be cryo, but not layered) Main Chamber Final optic Mini chamber Full energy Laser Beam Line (6-60 kJ) Description of Phase II (page 3 of 5) 2. Laser Facility--secondary functions Chamber Dynamics: Evaluate chamber dynamics models with “Mini Chamber” Chamber materials:Study candidate wall and/or optics materials

  16. Description of Phase II (page 4 of 5) 3. Cryogenic Target Facility Target fabrication: “Batch mode” mass production of fusion class (cryogenic) targets. Target Injection: Repetitive injection of above targets into a simulated fusion chamber environment. Cryo Target factory “mass” production Cryogenic, layered target Tracking & characterization IFE Chamber environment (e.g. right gas, wall temp, etc)

  17. Description of Phase II (page 5 of 5) • 4. Power Plant Design • Produce a credible design for a laser fusion power plant that meets the technical and economic requirements for commercial power. • 5. Chamber and final optics materials/structures: • Evaluate candidate materials/structures in a non-fusion environment. • 6. Target Physics: • Develop viable, robust high gain targets for fusion energy using integrated high-resolution 3D target modeling. • Validate design codes with target physics experiments at fusion scale energies, (e.g. on NIF).

  18. Cost Breakdown for Phase II: KrF

  19. Timeline for DPSSL- IRE (6 kJ Venus Laser ) development and operation 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Laser Design $12M Construct & Procure $135M Laser Activation $22M Integrated experiments Laser:$36M; Chamber:$10M Vendor readiness $22M Chamber Design $0.5M Construct & Procure $6M Chamber Activation $9.5M Vendor Readiness ($22M): - Contracts ($10), Crystal growth ($6.5), Overhead ($5.3) Design ($12M): - Personnel ($7.2), Overhead ($4.8) Procurement and Construction ($135M): - Personnel ($10) - Diodes (assumed cost $1.2 / Watt, 30 MW) ($39.6) - Crystals ($10) - Laser Hardware ($12.9) - Power Conditioning ($17) - Facilities and Utilities ($22.9) - Overhead ($22.3) Activation ($22M): - Personnel ($8.1), Crystals ($4.8), Procurements ($1.2), Overhead ($7.6) Integrated experiments ($36M): - Personnel ($12.0), Crystals ($3.6), Procurements ($1.8), Overhead ($18.6) $277M Personnel and Laser Hardware ($168M + $50M contingency) - LLNL Overhead ($59M; Assumes 30% reduction in tax base) Cost Breakdown for Phase II: DPPSL

  20. Cost Breakdown for Phase II: Other R & D

  21. Elements, Cost, & Schedule to develop Laser Fusion Energy 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 DESIGN CONST OPERATION Laser Facility: $275M (laser) + 27 M (chamber) DESIGN CONST OPERATION Target Facility: $99 M 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Phase I $140 M Phase II $650M($65M/yr) Phase III: ETF: $4,947 M ($350M/yr) DEMO $ 1,000M ?? Lasers: $105 M Targets $15 M ? Optics $4.8 M Chamber $7.0 M Target Physics: $100 M Materials $6.8 M Other Comp: $150 M

  22. Criteria to go from Phase II to Phase III (ETF) (1 of 2) • 1. Lasers: • Full functionality of laser beam line using the best laser choice to emerge from Phase I. (full energy beam line KrF, full aperture DPSSL) • Meets all the fusion energy requirements: • efficiency rep rate cost basis • rep-rate durability • pulse shaping illumination uniformity • 2. Final optics/target injection: • Laser beam can be hit injected target with the required precision. • Required optics LIDT durability. • 3. Target fabrication: • “Batch mode” mass production of fusion class (cryogenic) targets. • 4. Target Injection: • Repetitive injection, tracking, and survival of targets into a simulated fusion chamber environment.

  23. Criteria to go from Phase II to Phase III (ETF) (2 of 2) • 5. Power Plant Design: • Produce a credible design for a laser fusion power plant that meets the technical and economic requirements for commercial power. • Demonstrate candidate materials / structures can survive in a non-fusion environment. • Develop one or more credible blanket concepts. • 6. Chamber and final optics materials/structures: • Evaluate candidate materials/structures in a non-fusion environment. • 7. Target Physics: • Develop viable, robust high gain targets for fusion energy using integrated high-resolution 3D target modeling. • Validate design codes with target physics experiments at fusion scale energies, (e.g. on NIF).

  24. Description of Phase III (ETF) • The ETF will have operational flexibility to perform four major tasks: • Full size driver with sufficient energy for high gain. • 2 MJ Laser • Replications of the beam line developed in Phase II. But allow improvements. • Optimize targets for high yield. • Address issues specific to direct drive and high yield. • Test, develop, and optimize chamber components • Includes first wall and blanket, tritium breeding, tritium recovery. • Requires thermal management (125 MWth). • Electricity production (300-400 MW)with potential for high availability. • Chamber with blanket and electrical generator (1250 MWth). • Laser, final optics and target technologies should be mature and reliable by now

  25. ETF-Tasks 1 & 2 (driver demo and optimize gain) Target fabrication & injection. DEMO Scale. Capable of continuous 5 Hz runs Target factory Laser : DEMO Scale ~ 2.2 MJ > 106 shots MTBF for entire system (Beam lines > 108 from Phase II) OPTIMIZE TARGETS FOR HIGH GAIN Single shot and burst mode Final Optics:DEMO Scale (Full LIDT threat & debris) Chamber: see next Viewgraph

  26. Full yield, rep-rate, burst -- target physics, chamber dynamics 10% yield, rep-rate, continuous -- material/component tests TWO MODES: Test multiple blanket concepts, if needed 40cm x 40 cm cooled samples @ 2 m radius ETF-First Generation Chamberfor Tasks 1, 2, andTask 3 (materials/components blanket development) FIRST WALL (6.5 m radius) Full laser energy & yield (250 MJ) 10 shot bursts @ 5 Hz 105 shots < 0.02 micron erosion/shot Full laser energy with 10% yield 107shots at 5 Hz negligible erosion/shot Design allows annual replacement BLANKET / COOLING 125 MWth (10% yield @ 5 Hz) Breed Tritium (Sombrero TBR= 1.25 (LiO2) COULD BE CTF?

  27. ETF-Task 4 (Electricity Production) Upgrade chamber materials based on R&D Upgrade to best blanket to come out of R&D Upgrade chamber cooling: (125MW to 1.3 GW thermal) Generate 300-400 MW electricity (expect 250 MW net to Grid by 2028)

  28. Cost Breakdown for ETF: KrF laser

  29. Cost Breakdown for ETF: DPPSL The ETF costs were estimated using the NIF cost basis • NIF Elements • Facility • Driver • - Optics • - Optical pump • - Pulsed power • - Gain media • - Cooling • - KDP • - Pockels cell • - Deformable mirror • - Front end • Controls and • data acquisition • Diagnostics DPSSL costs Similar Similar Much more (diodes vs flashlamps) More (rep-rated efficient design) More (crystals vs glass) More (gas flow vs passive cooling) Similar Similar Similar Similar Similar Similar Total ~$1.5 B ~$1.5 + $1.0 (diodes) + $0.5 (misc + contingency) Projected driver costs for: - ETF is $3.0 B, 1st of kind - IFE plant is $1.0 B, 10th of kind ($500/J)

  30. Cost Breakdown for ETF: other technologies

  31. Elements, Cost, & Schedule to develop Laser Fusion Energy 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 DESIGN CONSTRUCTION OPERATION ETF Laser*:$3,000 M(inc building) DES CONST OPERATION DES CONST OPERATION Target Factory & Injector: $339 M 1st Chamber: $145 M Optimize Yield: $100M Blanket Dev: $200 M OP CONST DES Electricity:$638 M 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Phase I $140 M Phase II $650M($65M/yr) Phase III: ETF: $4,947 M ($350M/yr) DEMO $ 1,000M ?? Lasers: $105 M NIF Targets $15 M ? ? DESIGN CONST OPERATION Laser Facility: $275M (laser) + 27 M (chamber) Optics $4.8 M Chamber $7.0 M DESIGN CONST OPERATION ? Target Facility: $99 M Target Physics: $100 M Materials $6.8 M Other Comp: $150 M

  32. Criteria to go from ETF to DEMO • Demonstrate gain & reproducibility required for commercial fusion power • Demonstrate integrated operation of critical components-- • ...laser + target fabrication + chamber... • 3. Extends to reliable and economically attractive approach for commercial electricity.

  33. Description of Laser IFE DEMO Could employ the core of the ETF laser driver, target fab, injection, etc with mods optimized for commercial application rather than research. Components optimized for commercial power generation. Given the potential capability for the ETF, DEMO could be a second generation plant with significant industrial investment.

  34. Elements, Cost, & Schedule to develop Laser Fusion Energy 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 CONSTRUCTION DESIGN OP ? DEMO 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Phase I $140 M Phase II $650M($65M/yr) Phase III: ETF: $4,947 M ($350M/yr) DEMO $ 1,000M ?? DESIGN CONSTRUCTION OPERATION Lasers: $105 M ETF Laser*:$3,000 M(inc building) NIF DES CONST OPERATION Targets $15 M Target Factory & Injector: $339 M ? ? DES CONST OPERATION 1st Chamber: $145 M DESIGN CONST OPERATION Laser Facility: $275M (laser) + 27 M (chamber) Optics $4.8 M Optimize Yield: $100M Blanket Dev: $200 M Chamber $7.0 M DESIGN CONST OPERATION ? Target Facility: $99 M OP CONST DES Electricity:$638 M Target Physics: $100 M Materials $6.8 M Other Comp: $150 M

  35. Elements, Cost, & Schedule to develop Laser Fusion Energy 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 CONSTRUCTION DESIGN OP ? DEMO DESIGN CONSTRUCTION OPERATION ETF Laser*:$3,000 M(inc building) DES CONST OPERATION DES CONST OPERATION Target Factory & Injector: $339 M 1st Chamber: $145 M DESIGN CONST OPERATION Laser Facility: $275M (laser) + 27 M (chamber) Optimize Yield: $100M DESIGN CONST OPERATION Target Facility: $99 M Blanket Dev: $200 M OP CONST DES Electricity:$638 M 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Phase I $140 M Phase II $650M($65M/yr) Phase III: ETF: $4,947 M ($350M/yr) DEMO $ 1,000M ?? Lasers: $105 M NIF Targets $15 M ? ? Optics $4.8 M Chamber $7.0 M ? Target Physics: $100 M Materials $6.8 M Other Comp: $150 M

More Related