1 / 54

SoundCard Packet Radio

SoundCard Packet Radio. Amateur Radio Club ITB YB1ZX. References. http://home.pages.de/~flexnet/ http://www.afthd.tu-darmstadt.de/~flexnet/index.html ftp://ftp.afthd.tu-darmstadt.de/pub/flexnet/3.3g/. What is Flexnet?. PC based packet radio Use SoundCard as modem! Run on Windows95 / 98.

layne
Download Presentation

SoundCard Packet Radio

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SoundCard Packet Radio Amateur Radio Club ITB YB1ZX

  2. References • http://home.pages.de/~flexnet/ • http://www.afthd.tu-darmstadt.de/~flexnet/index.html • ftp://ftp.afthd.tu-darmstadt.de/pub/flexnet/3.3g/

  3. What is Flexnet? • PC based packet radio • Use SoundCard as modem! • Run on Windows95 / 98. • Written by Gunter Jost, DK7WJ from Flexnet Gruppe Darmstadt, Germany. • Http://home.pages.de/~flexnet/

  4. Devices drive by Flexnet • Baycom Modem 1200bps AFSK • Baycom Modem 9600bps FSK • TNC2 with 6PACK EPROM • SCC Modem Card • SoundCard modem (PSA Chipset, SB / ESS). • Etc ..

  5. Preparation

  6. Minimum Hardware Req’d • PC 486 DX2 • non-PnP SoundCard compatible with SoundBlaster & WSS. • Radio Transceiver (VHF / UHF). • PTT Circuit

  7. Minimum Software Req’d • Windows95 • PC/Flexnet with SoundCard modem driver.

  8. Where to get it? • http://www.afthd.tu-darmstadt.de/~flexnet/index.html • ftp://ftp.afthd.tu-darmstadt.de/pub/flexnet/3.3g/

  9. Instalation

  10. System

  11. Profile

  12. SC

  13. config.sys

  14. During Bootup U’ll see ..

  15. PTT Circuits

  16. Via COM Port

  17. Via Printer Port

  18. Via Game Port

  19. Instalation Test

  20. During Win95 Startup ..

  21. FlexNet Tools • Trace • Parameter • AX.25 routes • AX.25 tree view • IP routes

  22. FlexNet Parameter

  23. FlexNet AX.25 Routes

  24. FlexNet AX.25 Route Tree

  25. Diagnostics

  26. Diagnostics • Shell to DOS • run SMDIAG.EXE from FlexNet directory

  27. Check Link Layer ..

  28. Check AX.25 Connection • BCT.EXE <callsign> • [Esc] (C)onnect <gate-callsign>

  29. TCP/IP Setup ..

  30. TCP/IP Setup • Control Panel -> Network -> Add -> Adapter -> Have Disk • Click “Browse” -> FlexNet Directory • FlexNet IP -> AX.25 • Click “OK” • Control Panel -> Network -> Add -> Protocol -> Microsoft -> TCP/IP

  31. Net Setup

  32. Add Adapter

  33. Browse FlexNet disk/folder

  34. IP Setup

  35. Gate Setup

  36. DNS

  37. IP Route

  38. Check InterNet Route

  39. Check InterNet Route • C:\WINDOWS>ping <IPdestination>

More Related