1 / 24

L5 Signal Characteristics

L5 Signal Characteristics. Dr. A.J. Van Dierendonck, AJ Systems Dr. Chris Hegarty, MITRE Co-chairs RTCA SC159 WG1 GPS L2/L5 Industry Day May 2, 2001. Topics. L5 Signal Design Status Characteristics Summary PN Code Structure and Properties Signal Modulation Data Structure Data Content.

lavina
Download Presentation

L5 Signal Characteristics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. L5 Signal Characteristics Dr. A.J. Van Dierendonck, AJ Systems Dr. Chris Hegarty, MITRE Co-chairs RTCA SC159 WG1 GPS L2/L5 Industry Day May 2, 2001

  2. Topics • L5 Signal Design Status • Characteristics Summary • PN Code Structure and Properties • Signal Modulation • Data Structure • Data Content

  3. L5 Signal Design Status • Signal design is complete • RTCA SC159 published an L5 Signal Specification • Some specification details affected by SV design included comments • Phase Noise specification • Correlation Loss specification • Detailed Received Power specification • Inter-frequency and inter-code delays • To be resolved in ICWG process as SV design evolves

  4. L5 Characteristics - Summary • L5 = 1176.45 MHz • Bandwidth = 24 MHz (20 MHz null-to-null) • Minimum Received Power = -154 dBW • PN Code Chipping Rate = 10.23 MHz • QPSK Signal • In-Phase (I) = Data Channel • Quadraphase (Q) = Data-Free Channel • Equal Power in I and Q (-157 dBW each) • 50 bps data (rate 1/2 FEC encoded) 1176.45 MHz

  5. L5 Codes and Code Properties

  6. L5 Codes • Codes with 2 - 13 stage shift registers • Length of one (XA code) = 8190 chips • Length of second (XB code) = 8191 chips • Exclusive-Or’d together to generate longer code • Chipping rate of 10.23 MHz • Reset with 1 ms epochs (10,230 chips) • Two codes per satellite (4096 available) • One for Data channel, one for Data-Free channel

  7. L5 I & Q Code Generators

  8. L5 Code Generator Timing

  9. L5 Code Performance Summary • 74 Codes have been selected • 37 I, Q pairs • Maximum non-peak autocorrelation  -30 dB • Maximum cross-correlation with other selected codes  -27 dB • Average autocorrelation and cross-correlation  -42 dB • Maximum cross-correlation between I, Q pairs < -74.2 dB • Another pair selected as non-standard code

  10. L5 Signal Modulation

  11. L5 I & Q Code and Symbol Modulation • (Coded) coherent carrier in-quadrature with data • Allows for robust code & carrier tracking with narrow pre-detection bandwidth • Independent codes to remove QPSK tracking bias

  12. Neuman-Hoffman Codes • Encoded symbols and carrier • Modulate at PN Code epoch rate • Spreads PN Code 1 kHz spectral lines to 50 Hz spectral lines (including FEC) • Reduces effect of narrowband interference by 13 dB • Primary purpose of NH Codes • Reduces SV cross-correlation most of the time • Provides more robust symbol/bit synchronization

  13. L5 Neuman-Hoffman Codes 10 ms Code on I 20 ms Code on I

  14. L5 Data Content & Format

  15. L5 Data Content and Format • 5 – Six-Second 300-bit Messages • Format with 24-bit CRC (same as WAAS) • Encoded with Rate 1/2 FEC • To make up for 3-dB QPSK reduction • Symbols modulated with 10-bit Neuman-Hoffman Code • Messages scheduled for optimum receiver performance • Lined up with L1 sub-frame epochs

  16. Message Content • Mostly, content is same as on L1 • Exceptions: • Group delay terms added • L5 Health added • Different Text Message • PRN number added

  17. L5 Message Types (of 64 possible) • Message Type 1 - Ephemeris/Clock I • Message Type 2 - Ephemeris/Clock II • Message Type 3 - Ionosphere/UTC • Message Type 4 - Almanac • Message Type 5 - Text Message • Anticipated that Ephemeris/Clock Messages would be repeated every 18-24 seconds

  18. Message Type 1

  19. Message Type 2

  20. Group Delay Considerations • GPS time defined based on L1/L2 P(Y) iono-free measurement combination • Clock correction terms in NAV data convert SV time to GPS time • C/A-to-P(Y) timing variations specified to be < 10 ns, 2s, but no corrections provided • One reason why L1/L2 C/A code will never be as accurate as L1/L2 P(Y) • L5 introduces new group delay offsets • Q: How to tie L5 into GPS time?

  21. Satellite Group Delays C/A L1 C/A-P(Y) L1 P(Y) P(Y) L2 L2 C/A-P(Y) C/A I5 L5 Q5 DTIQ5

  22. L5 Message Group Delay Parameters • Clock correction parameters (af05, af15, af25) provided to correct SV time to GPS L5 time • Simplest way to provide accurate time for L1 C/A-L5 users • Presumes Control Segment monitors L1 C/A and L5 • I5-to-Q5 transition offset corrected by DTIQ5 message parameter • “TGD” terms provided for single-frequency L5 users and L2-L5 users

  23. Summary • L5 Signal Specification complete • RTCA publication in December 2000 • L5 signal and message structure provide many advanced features relative to C/A • Improved ranging precision and accuracy • Robustness in interference/low SNR conditions • Flexible message format for future growth

  24. Special Acknowledgements • Swen Ericson, MITRE • Gary McGraw, Rockwell Collins • Peter Fyfe, Boeing • Karl Kovach, ARINC • Keith Van Dierendonck • Tom Morrissey, Zeta Associates • Tom Stansell & Charlie Cahn • Rich Keegan (Leica) • Jim Spilker

More Related