1 / 24

PowerPoint Presentation

PowerPoint Presentation. Publisher The Goodheart-Willcox Co., Inc. Tinley Park, Illinois. Chapter 13. The Floor Plan. The Floor Plan. The floor plan is the heart of a set of construction drawings. All tradeworkers refer to the floor plan. Usually the first drawing completed.

larya
Download Presentation

PowerPoint Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PowerPointPresentation PublisherThe Goodheart-Willcox Co., Inc.Tinley Park, Illinois 1

  2. Chapter 13 The Floor Plan 2

  3. The Floor Plan • Thefloor plan is the heart of a set of construction drawings. • All tradeworkers refer to the floor plan. • Usually the first drawing completed. • The basis for many other plans. • Actually a section drawing. • Keep the floor plan clean and uncluttered. 3

  4. Required Information • Information that should be included on the floor plan includes: • Location of Exterior and interior walls. • Size and location of windows and doors. • Location of Stairs. • Room names. • Materials used (Material symbols). • Location and size dimensions. (continued) 4

  5. Required Information • Drawing scale. • Built-in cabinets and appliances. • Location of Permanent fixtures. • Location of Fireplaces and Chimneys. • Walks, patios, and decks. • Related structures are frequently included. 5

  6. Location and Size of Walls • Walls should be drawn actual thickness. • Since the floor plan is a section drawing hatch patterns (symbols) should be used to indicate materials. 6

  7. Wall Material Symbols 7

  8. Windows and Doors • Use a centerline to locate the opening for windows and doors in frame walls. • Dimension to the side of the opening in a masonry wall. • Openings for windows are sash width. • Openings for doors are actual width. • Door swing should be indicated. 8

  9. Window and Door Location • Windows and doors should be located in a frame wall using a centerline. Door swing is also shown. 9

  10. Stairs and Fireplaces • Only information about the basic size and location of stairs and chimneys needs to be recorded on the floor plan. • For stairs, show direction of flight, number of risers, and width of stairs. • For a chimney, show basic depth and width, opening design, and location. 10

  11. Stairs on Floor Plan • Information about a set of stairs that is usually included on the floor plan. 11

  12. Walks, Patios, and Decks • Several outside features are usually included on the floor plan. • Walks, patios, and decks are examples. • Indicate size and materials on the plan. • Consider these elements as part of the total plan. 12

  13. Room Names • Room names help communicate the plan to others. • Room names should be 3/16" high. • Room names should be in the center of the room. 13

  14. Material Symbols • Material symbols or material hatchpatterns are used to denote each material. • Use a material symbol whenever the material should be identified. • If the symbol is not a standard one, identify it. 14

  15. Material Symbols 15

  16. Material Symbols 16

  17. Dimensioning • Dimensions on a floor plan show size and location of the features. • Proper placement of dimensions requires good judgment. • Locate dimensions where one would logically look for them. • In architectural drafting, dimension lines are continuous lines with the dimension figure placed above the line. 17

  18. Dimensioning • Dimension figures are always parallel to the dimension line (aligned). • Be consistent with the type of termination symbol used for dimension lines. • Move dimension lines out from drawing. • Space dimension lines 1/4" or 3/8" apart. • Make leaders no longer than 2". 18

  19. Dimensioning • Dimensions are recorded in feet and inches. • Feet and inch marks may be omitted. • Dimensions less than 1' are usually indicated as 1/2", 2", 6", etc. • Dimension interior frame walls to the center of the wall. • Dimension exterior frame walls to the outside of the stud wall. 19

  20. Dimensioning • Recommended method of dimensioning frame wall construction. 20

  21. Dimensioning • Solid masonry walls (cast concrete, block, brick, or stone) are usually dimensioned as shown. 21

  22. Dimensioning • Brick veneer walls are dimensioned to the outside of the stud wall. • Solid masonry walls are dimensioned to the outside of the wall. • Overall dimensions are needed to provide the total length and width of the structure or major parts of the structure. 22

  23. Dimensioning • Add up partial dimensions to be sure they equal the overall dimensions. • Notes are often necessary to present information that cannot be represented by dimensions or symbols. • Notes should be read from the bottom of the sheet. 23

  24. Scale and Sheet Identification • Residential floor plans are usually drawn at 1/4" = 1'-0". • C-size paper is generally large enough. • Number the sheets in the package. • Sheet 1 of 6, 2 of 6, etc., works well. • Sheet numbers should be placed in the lower right-hand corner. 24

More Related