1 / 70

PRACTICAL PRESSURE MAPPING

PRACTICAL PRESSURE MAPPING. Presented by: Andrew Frank Vista Medical July 2006. Pressure Mapping – What’s The Point?. Our Goal. To Prevent This!. Wound measurement using VEV MD. Some Sobering Numbers. 39% of SCI Veterans in Houston in the 3 Years studied were treated for a PU

lars
Download Presentation

PRACTICAL PRESSURE MAPPING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PRACTICAL PRESSURE MAPPING Presented by: Andrew Frank Vista Medical July 2006

  2. Pressure Mapping – What’s The Point?

  3. Our Goal

  4. To Prevent This! Wound measurement using VEV MD

  5. Some Sobering Numbers • 39% of SCI Veterans in Houston in the 3 Years studied were treated for a PU • 150 day average in Hospital • $150,000 per Hospitalization. • Garber, Rintala Journal of Rehabilitation Research and Development, Sept/Oct. 2003

  6. The Cost is Significant • SCI general prevalence 25%-85% • Mean cost in 1998 $37,288 • Total cost estimated up to $3.6 Billion in 1999.

  7. Incidence of Skin Breakdown in SCI • Incidence of SCI continues to be 80% male, 20% female • Substantial physiological differences between genders • Increased incidence with increased age Courtesy of LAURIE M. RAPPL, PT, CWS

  8. SCI Skin Changes • Collagen catabolism • Decreased amino acid concentration • Decrease in enzymes of biosynthesis • Decrease in proportion of Type I to Type II collagen • Decrease in density of adrenergic receptors • Poor collagen synthesis • Abnormal vascular reactions • Decreased blood flow • Decreased PO2 – 5X less than in innervated skin • Decreased fibronectin, glycoproteins for fibroblast activity • Increase in urinary excretion of GAG's, which are the ground substance for collagen bundles The skin below the injury is not the same as the skin above. Courtesy of LAURIE M. RAPPL, PT, CWS

  9. Wounds Are Not All The Same Courtesy of LAURIE M. RAPPL, PT, CWS

  10. Deep Pressure Ulcer Stage IV Wound measurement using VEV MD

  11. Shear Ulcer Stage III Courtesy of D. Keast

  12. Causes of Shear No Compression Tangential Forces Pinch No Shear Shear Shear

  13. Summary of Causes • Immobility • Incontinence • Pressure • Friction • Shear • Maceration a.k.a. Heat and Moisture

  14. Evidence Based Practice • We used to say outcomes measures • Why do we insist on an x-ray for a broken wrist yet we will provide AT with a short paragraph or two • Orthopedics get paid because they use objective tools like Biodex, Cybex, etc.

  15. Evidence Based Practice: It’s Here • Veteran SCI patients guidelines are that they be assessed with pressure mapping annually. • FL Medicaid reviewers frustrated. • State of FL purchases 11 pressure mapping for their SCI and Brain Injury centers.

  16. Tools To Gather Evidence • Temperature • Shear • Pressure

  17. Temperature Mapping

  18. Shear Sensors

  19. Pressure Mapping

  20. Some Important Reminders About Pressure Mapping • Place the mat as close to the skin as possible and with what they normally sit on. • Consistently place the mat in the same orientation so there is no confusion later. • Position the mat square on the seat. • Confirm with your hands that the sensing mat is not hammocked. • Make sure the client is in a “ normal” or neutral position you can replicate with other surfaces.

  21. Be Prepared!! Are the Tools Ready? • Don’t keep the IPM system in the closet. • No one wants to wait 30 minutes while you set up. • Have it up and running ready to use • Install it on all the computers you use • Know when was it last calibrated

  22. Calibration Is Important • Do you have the equipment to do it • Does the calibration technique meet researcher and expert users approval • Do you have a protocol governing when, who and where calibration is done? • Does the system let you know if the calibration was successful?

  23. Example of a Calibration Kit

  24. Are You Ready? • Wash your hands! For your sake and theirs, before and after the evaluation! Gloves?? • Make sure you use an isolation bag! A thin PE dry cleaning type bag or facility garbage bag is fine.

  25. How Long To Wait? • Some advocate up to 45 minutes-not usually practical-but you could use remote to test. • Research indicates 6-8 minutes is a good practical time (Stinson 2002). • You need to be observant as it depends on the solution you choose.

  26. How Do We Make Sense Of Pressure mapping? • What can we really do? • What do the numbers mean? • How can we make good decisions?

  27. We Can Only Redistribute: We Can’t • Relieve pressure Or • Reduce pressure

  28. What About The Numbers??? • A particular number at a particular location does not = success or safety. • Key numbers to watch are • Highest pressure-Where is the potential trouble? • Focuses attention on key at risk areas • Sensing Area- More is better! (Quantity of distribution) • Are we expanding or contracting the area of the pressure distribution on the surface? • Coefficient of Variation - Lower the % the Better! (Quality of distribution) • How evenly is the pressure distributed over the surface?

  29. How Do We Decide? • Keep in mind that we are doing a case study of one. • No normative data is available yet to guide our decisions for a particular patient type. • The numbers are only bench marks to refer to as we seek a better solution. • Is a proposed position or product affording a better pressure distribution, functional capability and or comfort than another?

  30. Don’t Forget Asymmetry! Make sure that it’s the client not a misplaced sensing mat?

  31. That’s More Like It!

  32. Where Does Pressure Fit In Our Assessment Hierarchy? • Patient • Position • Pressure

  33. So Here We Go! In Brief… • Introduce pressure mapping • Capture how they are currently doing • Demonstrate the client’s challenges • Document usual/least costly solutions • Provide as necessary an appropriate alternative • Communicate our findings effectively

  34. PM Clinical Wizard

  35. Multi-System Analysis Braden Scale for Predicting Pressure Sore Risk • Validated Long term care Geriatric tool • Useful to expand areas of investigation • Nutrition, incontinence and out of chair activities

  36. Focusing On The Wrong P Can Cost You! • Client and O’Malley’s • Beautiful seating solution in clinic but a wood stool at the bar defeats the benefits • Caregiver impact on Vet with repetitive injury • Why five years of sacral pressure ulcers only in August?

  37. Learn About the Patient • Gather any background information you deem pertinent and record in the client information tab. • General, equipment related for future reference. • Don’t rewrite the patient file but do include the “Cliff Notes” of what is relevant to what you are doing. • Learn about their lifestyle and goals. Lifestyle can trump good seating.

  38. Client Positioning Issues? • Client Information Check list- • Jeannie Minkel’s for example. • Use camera as part of documentation • Illustrate the challenges at the beginning • Illustrate the recommended solution and the good results

  39. Picture the Posture

  40. 1) Introduce Pressure Mapping • Explain the process • To remove any apprehensions • Involve client and/or caregivers in the process • Allow them to interact with the technology • They won’t be able to while you do the assessment or they will confuse your work • Make sure you use your hands to limit hammocking

  41. Client’s Background • 45 year old SCI client – 25 year post injury C5 Quadriplegia • Long standing history of right side Stage I ulcer (has been worse) • Now problems with left side Stage I ulcer and NOT problems on right side. • Cannot stay up longer than 4 hours

  42. Current Complaint • Unable to be up for longer than 4 hours due to redness in both Ischial Tuberosities, with left being the worst. • Secondary is concern over the tail bone pressure which occurs with current position and/or recline • Goal of assessment/intervention: able to be up 6 hours min, but preferably 8 hours each day.

  43. 2) Capture Them in Their Existing Seating • Now that they have sat for a while in their existing mobility device scan, store and describe • Keep your comments related to the specific scan stored. • General information should be in client information tab • Confirm what you see with your hands! Don’t trust all you see on the screen confirm it! • Make notes with the thought in mind that you need to understand them 3-6 months down the road. • Make sure you turn the client away from the screen so they can no longer interact with the pressure mapping system. This will help answer the question: Why do we need to make changes or spend money?

  44. Current Seating What is suspicious in this picture? Note the hexagon.

  45. Use Your Hands!! What really is at the 135 mmHg location??

  46. 3) Demonstrate What Their Challenge Is • If possible have the client sit upright on a firmer surface like a mat table or a foam cushion. This should be part of the larger mat evaluation. • Scan, store and describe where the boney prominences are. Confirming with hands and noting coordinates on screen. This will help answer the questions: What is the client’s boney architecture like? Is it all there? How rotated is the pelvis,etc.? Why won’t a simple solution be sufficient?

  47. On A Firm Flat Surface Don’t put the client at risk doing this. A mat table or firmer foam cushion might be good choices.

  48. 4) Document the Most Commonly Used/Least Costly Alternative • Your years of experience or the typical funding parameters may lead you to a particular solution • Scan, Store and describe what you did. • This may take recording a number of scans as you try a number of variables. You can use 4 scan view to compare your solutions head to head. • Be sure to describe what you did as you scan and store This will help answer the question: How well did the usual or least costly solution performed for the client?

  49. A “Usual” Solution Foam cushion: pressures still unacceptably high, and highly focused

  50. 5) Provide an Alternative Solution if Necessary • If you’re not satisfied with the “normal” solution try another and validate or challenge. • Again this may take recording a number of scans as you try a number of variables. • Be sure to describe what you did as you scan and store This will help answer the question: Why are we recommending a solution different than the least costly or “usual”?

More Related