1 / 20

FloTech Products

FloTech Products. Purpose of Overfill Detection To prevent a fuel spill should the loading process fail to stop before overfilling a tank compartment. Overfill detection systems are required on all DOT 306/406 petroleum cargo tanks as a secondary emergency shut-off system.

lance
Download Presentation

FloTech Products

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FloTech Products

  2. Purpose of Overfill Detection To prevent a fuel spill should the loading process fail to stop before overfilling a tank compartment. Overfill detection systems are required on all DOT 306/406 petroleum cargo tanks as a secondary emergency shut-off system. Required by NFPA and Specified by API-RP 1004

  3. Location … Location … Location

  4. Petroleum Overflow Detection Systems (Optional)

  5. Retain / Overfill System Duocept Sockets FT202 TopSensor FT 204 Onboard Monitor FT 206 Retain Bottom Sensor

  6. FT204 Retain/Overfill Monitor • Monitors up to six FT202 Top Sensors for each compartment. • Monitors up to six FT206 Bottom Retain Sensors for each compartment. • Direct replacement for Civacon 3200 or 2

  7. FT202 R/OM type Top Sensor • 2” NPT Thread • Also available in 12-inch and 18-inch lengths. • Exclusive elastomer prism seal for longer life. Other manufacturers use epoxy seal only, which can become brittle, crack, leak, and cloud the optics. • Directly interchanges with Civacon #1050 Sensor

  8. FT206 Bottom Retain Sensor R/OM type • ½” NPT thread mounts to underside, or “belly” of tank compartment • Directly interchanges with Civacon #1000 Retain Sensor

  9. 5 wire Optic Probes & Sensors • Direct “drop-in” replacements for Scully & Civacon parts. • API Optic Compatible • FloTech has the exclusive Elastomer Prism Seal for longer service life.

  10. 2 wire Thermo-Optic Probes & Sensors • Direct “drop-in” replacements for Scully & Civacon parts. • Replaces classic Green or Silver T.P. Thermistor Sensor for instant start & longer life. • FloTech has the exclusive Elastomer Prism Seal for longer service life.

  11. Thermistor Dummy • 5 Channel Electrical Thermistor Dummy • Instant start in cold weather • API Thermistor compatible • Direct “Drop-In” replacement for Scully or Civacon parts

  12. Sockets • Hardcoat Face Plate reduces wear of “J” slots. • Stainless Steel hardware prevents corrosion. • Dust Cap provided. • API Compatible Float Optic Thermistor

  13. Float Sockets • Part #FT302 • Direct “drop-in” replacement for similar Scully & Civacon products. • Same socket connection as found on the nose plug of all trailers. • Uses a J560 Pin Type Socket Connector • API Compatible

  14. Thermistor Socket • Direct “drop-in” replacement for similar Scully & Civacon products. • Unique set of “J-Slot” and button contacts (API Spec RP1004). • Canadian configuration has four J-Slots and 10 pins.

  15. Optic Sockets • Direct “drop-in” replacement for similar Scully & Civacon products. • Unique set of “J-Slots” and button contacts as specified in API 1004. • WOGA (Western Oil & Gas Association) style “Button Socket”.

  16. The FloTech Advantage Versus Scully & Civacon sockets • A356T6 Heat Treated and hard-coat finish faceplate to insure long J-Slot life. • All hardware is stainless steel to prevent corrosion. • Jacketed dust cap cable to prevent hand injury. • 6-lug dust cap design to permit easy gripping with oily gloves. • Integrated 11 pin for truck ID communications.

  17. Testers & Rack Cords • Testers • Allows for easy, fast and economical way to check system. FT520 Tester • Rack Cords • Industry compatible for an easy to use, durable cord for Loading Racks. FT510 Tester FT600 Rack Cord

  18. Any Questions ???

More Related