1 / 15

Spring Design 101

Spring Design 101. Ritchy Froehlich General Manager Ace Wire Spring & Form Co., Inc. What information is needed to properly design/order a spring?. 1) What parameters do I Have? What does my spring fit into? What does my spring fit over?

lali
Download Presentation

Spring Design 101

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Spring Design 101 Ritchy Froehlich General Manager Ace Wire Spring & Form Co., Inc.

  2. What information is needed to properly design/order a spring? 1) What parameters do I Have? • What does my spring fit into? • What does my spring fit over? • What is the atmosphere? (Moisture, Saltwater, Heat etc.) • How is the spring being used/installed? • Has there ever been a problem before?

  3. What information is needed to properly design/order a spring? 2) What are the spring’s physical requirements? • What are the relaxed/installed lengths? • How much travel is involved? • What length are you traveling to? (Length/Deflection) • What is the max solid/travel height? • What force is needed at a specified length? • What type of material is needed? • What are the end types needed? • Tight Tolerances Needed? • Type of winding?

  4. Compression Springs 1) Type of ends?

  5. Compression Springs 2)What are my Physical Characteristics? • Size/Type of Material? • Outside Diameter? • Inside Diameter? • Free Length? • Total Coils? • Solid Height? • Rate per Inch? • Load @ Length?

  6. Compression Springs Ground Section Free Length Mean Diameter 12 ½ Coils Inside Dia. Outside Dia. Pitch Space Between Coils Size of Material

  7. Extension Springs 2)What are my Physical Characteristics? • Size/Type of Material? • Outside Diameter? • Inside Diameter? • Free Length Body/Inside Hooks? • Total Coils? • Initial Tension? • Rate per Inch? • Load @ Length? • Max Deflection? • Gap Lengths of hooks? • Straight Pull?

  8. Extension Springs

  9. Extension Springs

  10. Extension Springs

  11. Extension Springs

  12. Torsion Springs 2)What are my Physical Characteristics? • Size/Type of Material? • Outside Diameter? • Inside Diameter? • Body Length? • Total Coils? • Angle at free position? • Degrees of deflection? • Rate Inch/lbs. Per Degree? • Max degrees of Deflection? • Closewound or Pitched?

  13. Torsion Springs 1)Type of Ends?

  14. Conclusion 1) Always offer as much information as possible! 2) Remember, price is not always everything! 3) Remember, lead times!

  15. Spring Specification Sheet

More Related