1 / 8

Silicon VLSI backplanes which shows cracking in the Al mirror Image provided by Dr Neil Collings

Silicon VLSI backplanes which shows cracking in the Al mirror Image provided by Dr Neil Collings. Silicon VLSI backplanes showing "punch through" of the transistor underlying the mirror. Image provided by Dr Neil Collings.

lael
Download Presentation

Silicon VLSI backplanes which shows cracking in the Al mirror Image provided by Dr Neil Collings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Silicon VLSI backplanes which shows cracking in the Al mirrorImage provided by Dr Neil Collings

  2. Silicon VLSI backplanes showing "punch through" of the transistor underlying the mirror. Image provided by Dr Neil Collings

  3. Wafer1.tif: From Mark Mann. First image of CNTs grown by a new type of furnace. This shows morphology and size distribution of the grown nanotubes. SEM was used to compare this across the width of the 4" wafer.

  4. Yps42c1.tif: from Mark Mann. Checking for CNTs grown on the top of sharply etched tungsten contained within a Schottky module. The CNT operates as a field emission source. The SEM is used to check the CNT's length & rough diameter. It also checks for alignment.

  5. Images provided by: Husnu Emrah Unalan Demonstrating supergrowth Further details awaited

  6. Lewis06secondchipTT: Provided by Mark Mann. Fabrication of aligned, sparse arrays of multi-walled carbon nanotubes for use as a field ionizer for mass spectroscopy. Taken at 25 deg. tilt - some tips are >20 um high. They have spacing twice their height for optimum field v current density. The SEM is vital to help achieve a greater uniformity in the grown CNTs.

  7. Vertically aligned Multiwalled Carbon Nanotubes Contributed by Shupei Oei We check by SEM for a) alignment b) growth c) morphology- height, width d) identify tip or base- growth, by observing position of catalyst particle. Resolution is not quite sufficient for for imaging of single walled carbon nanotubes.

  8. (a) Microchannel etched by DRIE (b) Microchannel with vertical side wall 100um 20um (c) Close-up view at 20kX magnification scallops structure on vertical side wall generated during DRIE using the Bosch process 1um (d) Close-up view at 40kX magnification No CNTs on vertical sidewall Forest MWCNTs on horizontal floor 1um Figure 3.2: SEM images (from CL Choong) of CNT microchannel etched by the Bosch process in deep reactive ion etching (DRIE). MWCNTs grow on horizontal floor but not vertical sidewall of microchannel.

More Related