1 / 16

Introduction

Wood properties of sawn timber of Norway spruce ( Picea abies (L.) Karst.) grown under wide spacing Franka Brüchert, Florian Frisch, Udo H. Sauter IUFRO All Division 5 Conference, Taipei. Introduction.

Download Presentation

Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wood properties of sawn timber of Norway spruce (Picea abies (L.) Karst.) grown under wide spacing Franka Brüchert, Florian Frisch, Udo H. Sauter IUFRO All Division 5 Conference, Taipei

  2. Introduction “ If we regard future-crop trees rather as tamed solitaries than as partially unshackled captives, then science must also more intensly address research on solitary trees.“ABETZ 1987

  3. isolation at age ~ 15 years alternative A 350 / ha age 28-29 alternative B 700 / ha age 27-29 alternative FA 1600 / ha age 42 2 trees per site Silvicultural alternatives

  4. stem disc at 1.30 m stem disc at5 m 4 m log, split to 2x2m 2 short logs (1.37 – 2.06 m) 78 laths3 x 6 cm² 44 cants5 x 10 cm² Test material

  5. Results “Roundwood“

  6. Roundwood quality down-grading reasons: knots, ring width, compression wood

  7. threshold between grade B and C Branchiness of roundwood alternative A & B: ca. 80% sound knotsalternative FA : 7.5% sound knots

  8. Ring width of roundwood threshold between grade B & C threshold S 7/ S 10 threshold between A & B

  9. Results “Sawn timber“

  10. 26,7 30 22,6 17,8 20 thickest branch [mm] mean diameter of 10 0 A B FA alternative Knot dimension of sawn timber threshold S 10/ S 7 : wide side: 40mm narrow side: 20mm threshold S 13/ S 10: wide side: 20mm narrow side: 10mm

  11. S 0 = reject Knottiness of sawn timber

  12. 8 7,2 7,2 6 3,7 4 ring width [mm] 2 0 A B FA alternative Ring width of sawn timber (cants) treshold between S10 & S7 threshold between S13 & S10

  13. S 0 = reject Ring width of sawn timber

  14. Twist of sawn timber S 0 = reject

  15. Wood density, MOE & MOR of sawn timber

  16. Quality trend for future? branches ringwidth density juvenile core ??

More Related