4 Easy Steps to Test a Viking Oven Igniter

1. 4 Easy Steps to Test a Viking Oven Igniter Viking ovens are one of the most popular and reliable brands on the market. However, like any appliance, they can run into issues from time to time. When this happens, it’s important to get Vikings appliance repair in Santa Monica as soon as possible. There are a few reasons why Viking oven repair is so important: Viking ovens are expensive. They are a significant investment, and you want to make sure  that they last for as long as possible. Viking ovens are used for cooking.  This means that if there is an issue with your oven, it could affect the quality of your food. Viking oven repair can be  complicated. Viking ovens are complex machines requiring a skilled technician to fix them. If your Viking oven has issues, don’t wait to get it repaired. Viking oven repair is essential to keep your oven in good condition and ensure that your food is highest quality.

2. How Do You Test A Viking Oven Igniter? If your oven is not lit, it may be due to a faulty igniter. Testing the igniter is a simple process done at home with a few tools. Follow the steps below to test your Viking oven igniter. Tools needed: Multimeter  Screwdriver  Step 1 First, locate the igniter on your oven. It is typically located near the burner assembly. Once  you have found it, use a screwdriver to remove the igniter from its mounting bracket. Step 2 Next, use your multimeter to test the igniter for continuity. Touch the multimeter probes to the two  igniter terminals to do this. If the igniter is working properly, you should see a reading on the multimeter of between 0.5 and 1.0 ohms. Step 3 If you do not see a reading on the multimeter, or if the reading is outside of the normal range, this  indicates that the igniter is not working properly and will need to be replaced. Step 4 Once you have confirmed that the igniter is faulty, you can replace it by following the steps in your  oven’s manual. That’s it! By following these simple steps, you can easily test your Viking oven igniter to see if it is working properly. Viking Ignitor Troubleshooting If you’re having trouble with your Viking Ignitor, you can do a few things to troubleshoot the issue. First, check to ensure that the ignitor is properly seated in the firepot. If it’s not, reseat it and  try again. Try cleaning the ignitor with a wire brush if that doesn’t work. If that doesn’t work, you may  need to replace the ignitor. Check the batteries in the ignitor. If they’re low, replace them and try again. If that doesn’t  work, you may need to clean or replace the spark plug.

3. Make sure that the gas valve is open all the way. If it’s not, open it up and try again.  Make sure that the pilot light is lit. If it’s not, relight it and try again.  Make sure that the thermocouple is properly seated in the gas valve. If it’s not, reseat it and  try again.